General Motors recalled certain Silverado MD (mid-duty) trucks because the brake pressure switch can fail without warning, leaving you without brake warning lights or ABS function

The brake pressure switch is a sensor that sits on your brake master cylinder and detects when brake fluid pressure drops. When it works, it lights up your dashboard warning light if something is wrong with your brakes. If it fails, you lose that early warning system — and on trucks with ABS, you also lose anti-lock braking.

GM issued this recall because the switch can corrode internally or fail electrically, especially in trucks exposed to road salt or moisture. The failure is silent: your brakes still work mechanically, but you won't know there's a problem until you see a warning light that should have come on, or until you notice your ABS isn't functioning. That delay matters because it means you could be driving with a brake system fault and not realize it.

This recall affects Silverado MD trucks from specific model years. The exact years depend on which generation and chassis your truck is — GM issued multiple recall campaigns for this part across different production runs. You can find your truck's specific recall status by entering your VIN on GM's recall website or calling your Chevrolet dealer.

Key Takeaways

  • The brake pressure switch detects low brake fluid pressure and triggers your dashboard warning light; when it fails, you lose that warning system entirely.
  • A failed switch does not prevent your brakes from working mechanically, but it disables ABS and hides brake system faults from you.
  • The failure happens silently — there are no sounds, vibrations, or obvious signs that the switch has stopped working.
  • GM will replace the switch for free under the recall; the repair takes less than an hour at a Chevrolet dealer.
  • You should have the work done as soon as possible because a failed switch means you're driving without brake system diagnostics.

How the brake pressure switch works and why it matters

Your brake system has two main jobs: stop the truck, and tell you when something is wrong. The brake pressure switch handles the second job. It's a straightforward electrical switch mounted on the master cylinder that closes when brake fluid pressure rises (meaning you're braking) and opens when pressure drops (meaning you've released the brakes or there's a leak).

When the switch detects abnormally low pressure — which usually means a leak or low fluid level — it sends a signal to your instrument cluster. That signal lights up the brake warning light on your dashboard. On trucks with ABS, the switch also communicates with the ABS module to confirm that the brake system is functioning normally. If the switch fails, the ABS module can't verify system health and disables ABS as a safety measure.

The danger is that a failed switch gives you no warning. Your regular brakes still work because they're hydraulic — they don't depend on electricity. But you lose visibility into what's happening in your brake system. A slow leak, a failing component, or low fluid could develop without you knowing, and by the time you notice a problem, you might be in a dangerous situation.

Which Silverado MD model years are affected

GM issued brake pressure switch recalls for Silverado MD trucks across multiple model years and production runs. The recall campaigns are identified by their NHTSA recall numbers, and each one covers a specific range of VINs and model years. Because there are multiple separate recalls for this same part, you need to check your specific truck.

The fastest way to learn about your truck is affected is to visit safercar.gov, enter your VIN, and search for open recalls. You can also call your local Chevrolet dealer with your VIN and they will tell you when ready whether your truck has any outstanding recalls and what they cover.

Do not assume your truck is not affected just because it's an older model. GM has issued these recalls for trucks spanning several years of production, and the issue can appear in trucks with relatively low mileage. The only reliable way to know is to check your VIN.

What happens during the recall repair

The repair is straightforward: a technician removes the old brake pressure switch from the master cylinder and installs a new one. The job typically takes 30 minutes to an hour. No brake fluid needs to be flushed or bled unless the system was opened for another reason, and no other components are affected.

Because the switch is on the master cylinder, the technician may need to remove some components to access it — usually the air intake or battery — but this is routine work. Once the new switch is installed, the system is tested to confirm it's reading pressure correctly and communicating with the ABS module.

The repair is covered 100 percent under the recall. You pay nothing for parts or labor. If you've already paid out of pocket to have this switch replaced before the recall was issued, you may be able to request reimbursement from GM, though you'll need to contact the dealer or GM customer service with your receipt.

How to schedule the recall repair

Call your local Chevrolet dealer and tell them you need to have a brake pressure switch recall completed. Have your VIN ready. The dealer will look up the recall in their system, confirm your truck is affected, and schedule an appointment. Many dealers can fit recall work into their schedule within a week or two, though wait times vary by location and season.

You do not need to bring anything except your keys and proof of ownership (registration or insurance card). The dealer handles all the paperwork. If you want to confirm the recall number before you call, you can look it up on safercar.gov using your VIN — that way you can reference the specific recall when you schedule.

If your dealer is busy or you prefer to use an independent shop, be aware that independent shops can perform recall work, but they must order the part from GM and follow GM's repair procedure. Some independent shops are less familiar with recall requirements, so confirm they understand this is a manufacturer recall before you leave your truck with them.

What to do if you notice brake warning lights before the repair

If your brake warning light comes on before you can get the recall done, do not ignore it. Pull over safely and check your brake fluid level using the sight glass on the side of the master cylinder (or open the reservoir cap if there's no sight glass). If the fluid is low, top it up with the correct type of brake fluid for your truck — usually DOT 3 or DOT 4, printed on the cap — and drive carefully to the dealer.

If the fluid level is normal and the light is still on, the light itself may be caused by the failing switch, or it may indicate a real brake system problem. Either way, have the truck inspected by a technician before you drive it long distances. A brake system fault is not something to delay on.

If your ABS light comes on separately from the brake warning light, that is also a sign that the switch may have failed. ABS lights usually mean the ABS module has detected a fault in the brake system and disabled ABS for safety. Again, have it checked before you rely on the truck for long drives.

The difference between a failed switch and a real brake system problem

A failed brake pressure switch will disable your warning lights and ABS, but it will not make your brakes stop working. Your truck will still brake normally because the brake system is hydraulic — it doesn't need electricity to function. The danger is that you won't know if a real problem develops, because the warning system is offline.

If you ever feel your brakes becoming soft, spongy, or unresponsive, or if you notice brake fluid leaking under the truck, those are signs of a real brake system problem — not just a failed switch. Stop driving when ready and have the truck towed to a dealer. Do not attempt to drive it to the shop.

The recall repair addresses only the switch itself. If your truck has a separate brake system problem — a leak, worn pads, a failing master cylinder — that will still need to be repaired separately. The switch replacement will restore your warning lights so you can see those problems when they develop.

Frequently Asked Questions

Can I drive my truck safely if the brake pressure switch has failed?

Yes, mechanically your brakes will still work because they're hydraulic. But you've lost your early warning system, so you won't know if a brake problem develops. You should have the switch replaced as soon as you can, especially before long trips.

Will the recall repair fix my ABS if it's already disabled?

Yes. Once the new switch is installed and the system confirms normal brake pressure, the ABS module will re-enable ABS automatically. You don't need a separate ABS repair.

What if my dealer says they don't have the part in stock?

Most dealers can order the switch and have it within a few days. Ask them to order it and schedule your appointment for when it arrives. If your dealer is unable or unwilling to do the recall work, you can contact another Chevrolet dealer or call GM customer service for help locating a dealer that can do it.

Do I have to go to a Chevrolet dealer, or can any mechanic do this recall?

Any certified technician can perform the repair, but they must follow GM's procedure and use the correct part. Independent shops can do it, but confirm they understand recall requirements and can order the correct switch before you commit.

If I already paid to replace this switch before the recall, can I get my money back?

Possibly. Contact your Chevrolet dealer or GM customer service with your receipt and VIN. GM has reimbursed owners in some cases, but the process and may be able to access vary. It's worth asking.