A blown fuse is a one-minute fix if you know where to look
A fuse is a small safety device that breaks an electrical circuit when current gets too high. When a fuse blows, it stops power from reaching whatever it was protecting—your headlights, wipers, power windows, or interior lights. The fuse itself is a small cylinder or blade with a metal wire inside that melts when too much current flows through it. Replacing it means finding the fuse box, identifying the blown fuse, and swapping it for a new one of the same amperage. This takes five minutes and costs a few dollars.
You do not need special tools or training. You need the fuse box location, the correct amperage rating, and a replacement fuse. The hard part is usually finding the fuse box in your car, not the replacement itself.
Key Takeaways
- Your car has one or two fuse boxes—usually one under the hood and one inside the cabin—and your owner's manual shows exactly where they are and what each fuse protects.
- A blown fuse has a broken wire visible inside the clear plastic or a blackened appearance, while a good fuse shows an intact wire.
- Replacement fuses must match the amperage rating of the blown fuse, printed on the fuse itself and listed on the fuse box diagram.
- If a fuse blows again when ready after replacement, the underlying electrical problem needs diagnosis—do not keep replacing the same fuse.
- Fuses are sold in auto parts stores, gas stations, and online for under five dollars, and most stores stock common ratings.
Where fuse boxes are located in your car
Most cars have two fuse boxes: one under the hood (the engine compartment) and one inside the cabin, usually under the dashboard on the driver's side or behind a panel in the center console. Some vehicles have a third box in the trunk. Your owner's manual shows the exact location for your model and year.
To find it without the manual, look under the hood first. The fuse box is typically a black plastic box with a hinged or removable lid, often labeled "Fuses" or "Power Distribution." Inside the cabin, check the left side of the steering column or the area below the steering wheel. If you cannot locate it visually, search online for "[your year, make, model] fuse box location"—automotive forums and YouTube videos show the exact spot for nearly every car.
Once you find the box, open the lid. You will see a diagram printed on the inside of the lid or on a label attached to it. This diagram shows which fuse controls which system: headlights, wipers, power windows, cigarette lighter, and so on. The diagram also lists the amperage rating for each fuse position.
How to identify a blown fuse
A blown fuse looks different from a working one. If the fuse is a clear plastic cylinder (the older style), look through it: a good fuse has an intact metal wire running through the center, while a blown fuse has a broken or melted wire. You may also see blackening or scorch marks inside a blown fuse.
If your car uses blade fuses (the flat, rectangular plastic style common in newer cars), a blown fuse is easier to spot. The metal contact strip inside will be broken or visibly damaged, and the plastic body may be discolored or blackened. Some blown blade fuses show no visible damage but still do not conduct electricity—if you are unsure, pull it out and compare it side by side with a new fuse of the same rating.
Write down the amperage rating printed on the fuse you removed. This number (usually 5, 10, 15, 20, 25, or 30 amps) is critical: you must replace it with a fuse of the exact same rating. Using a higher-rated fuse defeats the safety purpose and can cause electrical damage or fire. Using a lower-rated fuse will blow when ready.
Steps to replace a fuse safely
Turn off the engine and all electrical systems before you start. This is not strictly necessary for safety—fuses are designed to break the circuit—but it reduces the risk of sparks and makes the replacement cleaner.
Locate the blown fuse using the diagram on the fuse box lid. Pull the fuse straight out. Most fuse boxes include a small plastic puller tool clipped to the inside of the lid; use it if you cannot grip the fuse with your fingers. Do not force it—if it is stuck, wiggle it gently side to side while pulling.
Insert the new fuse of the same amperage rating into the empty slot. Push it in until it clicks or seats fully. The fuse should be snug but not require excessive force. Close the fuse box lid and turn the engine back on. Test the system that was not working: if it works now, the replacement was successful.
Why fuses blow and what to do if one blows again
A fuse blows when too much electrical current flows through the circuit it protects. This usually happens because of a short circuit—a place where the electrical wire's insulation has worn away and the bare wire is touching metal—or because a component in that circuit has failed and is drawing excessive current.
If the fuse blows again within a few days or when ready after replacement, the underlying problem is still there. Do not keep replacing the fuse. A repeatedly blown fuse is a sign of a short circuit or a failing component, and continuing to replace it risks electrical fire or damage to other parts of the car. Instead, have the circuit diagnosed by a mechanic. They can trace the wiring, test the components on that circuit, and find what is actually wrong.
A single blown fuse that does not repeat is usually a one-time event—perhaps a power surge or a component that failed once and is now stable. If it happens again months later, replace it and monitor. If it happens again within weeks, get it checked.
What amperage rating you need and where to buy fuses
The amperage rating is printed on the fuse itself and listed on the diagram inside the fuse box lid. Common ratings are 5A, 10A, 15A, 20A, 25A, and 30A. Write down the exact rating before you go to buy a replacement.
Fuses are sold at auto parts stores (AutoZone, O'Reilly, NAPA, Advance Auto Parts), gas stations, Walmart, and online retailers. A single fuse costs between one and three dollars. Most stores stock the common ratings. If your car uses an unusual fuse type or rating, call ahead or order online to make sure it is in stock.
When you buy a fuse, you can also buy a small assortment pack—usually 5 to 10 fuses in mixed common ratings—for five to ten dollars. Keeping a spare set in your glove box means you will not be stranded if a fuse blows while you are away from a store.
Fuse types: cylinder versus blade
Older cars use cylindrical fuses, which are small tubes with metal caps on each end. Newer cars use blade fuses, which are flat rectangular pieces of plastic with two metal prongs. Some cars have both types in different fuse boxes. The fuse box diagram will show you which type goes in each slot, and you cannot physically install the wrong type—a blade fuse will not fit in a cylinder slot and vice versa.
If you are not sure which type your car uses, open the fuse box and look. If all the fuses are small tubes, you need cylinder fuses. If they are flat rectangles, you need blade fuses. When you buy replacements, tell the store clerk your car's year, make, and model, or show them a photo of the fuse box. They can confirm the type and make sure you leave with the right one.
Frequently Asked Questions
Can I drive with a blown fuse?
You can drive, but whatever system that fuse protected will not work. If it is a headlight, tail light, or brake light fuse, driving is unsafe and illegal. If it is a power window or cigarette lighter, the car is still drivable but you lose that convenience. Replace it as soon as you can.
What if I replace the fuse and nothing changes?
First, make sure you replaced the correct fuse—check the diagram again and verify the fuse you removed was actually blown. If you replaced the right fuse and the system still does not work, the problem is not the fuse itself but something else on that circuit: a failed component, a loose connection, or a broken wire. Have a mechanic diagnose it.
Is it safe to replace a fuse myself?
Yes. Fuses are designed to be user-replaceable, and the fuse box is not dangerous to touch when the engine is off. The only risk is installing the wrong amperage rating, which can damage the electrical system. As long as you match the rating exactly, replacement is safe.
What does the amperage number on a fuse mean?
Amperage is the amount of electrical current the fuse allows before it breaks the circuit. A 15-amp fuse breaks at 15 amps; a 20-amp fuse breaks at 20 amps. Each circuit is designed for a specific maximum current, and the fuse rating matches that design. Using a higher rating lets too much current flow and risks fire or damage.
Can I use a higher-amp fuse if I do not have the right one?
No. Using a higher-amp fuse defeats the safety purpose of the fuse and can cause electrical fire or damage expensive components. Always use the exact amperage rating. If you cannot find the right one, wait until you can order it or go to another store.