What Chevrolet block casting numbers tell you
A casting number is a code stamped into the metal of your Chevrolet engine block during manufacturing. It identifies the foundry that cast the block, the date it was cast, and sometimes the specific mold used. Unlike a VIN, which tracks your whole vehicle, a casting number tracks only that piece of iron — and it matters because two blocks with the same displacement can have different internal passages, bolt patterns, or strength ratings.
If you are rebuilding an engine, swapping blocks, or trying to verify what you actually have under the hood, the casting number is your first clue. It will not tell you the horsepower or whether the block has been bored, but it will confirm the foundry, the year range, and whether the block is original to your vehicle or a replacement.
Key Takeaways
- Chevrolet casting numbers are stamped on the block itself, usually on the passenger side near the bellhousing, and consist of letters and numbers that identify the foundry and casting date.
- The first letter or letters indicate which foundry cast the block — common Chevy foundries include Tonawanda, Flint, and Saginaw, each with their own letter codes.
- The middle digits represent the month and day the block was cast, allowing you to narrow down the production year when combined with other engine details.
- Casting numbers do not indicate displacement, horsepower, or whether the block has been modified, so you will need the block's actual dimensions or casting date to determine those details.
- Reference guides and Chevrolet engine databases cross-reference casting numbers to production years and foundries, making it possible to verify originality or identify a replacement block.
Where the casting number is located on your block
The location varies slightly by engine family and year, but Chevrolet typically stamps the casting number on the passenger side of the block, usually near the bellhousing or on the lower portion of the block wall. On small-block Chevys (262, 305, 327, 350, 400), look between the oil filter and the starter. On big-block engines (396, 402, 427, 454), the number is often on the right side of the block, lower down.
The number is stamped directly into the casting, not a separate label, so it will not peel off or fade easily. You may need to clean the area with a wire brush or degreaser to read it clearly. If you cannot find it on the passenger side, check the driver's side and the front of the block near the timing cover — some foundries used multiple locations depending on the mold.
How to decode the letters and numbers
A typical Chevrolet casting number looks like this: F 12 15 or T 8 23. The format is usually a letter (or two letters) followed by two or three digits.
The first letter identifies the foundry. Common Chevrolet foundries and their codes include Tonawanda (T), Flint (F), Saginaw (S), and Muncie (M). Some blocks also carry codes for outside suppliers like Central Foundry (C) or Olds foundries (O). Each foundry had its own quality standards and equipment, so the foundry code can help you understand the block's origin and whether it matches your vehicle's build location.
The middle digits represent the month and day the block was cast. In the example F 12 15, the 12 is the month (December) and 15 is the day. This is not the year — you need additional information like the engine's original installation date or other casting numbers on the engine to pinpoint the year. A block cast in December 1969 will have the same month-day code as one cast in December 1979, so foundry code and date together narrow the window but do not lock it down alone.
The last digit or digits sometimes indicate the mold cavity or a revision code, though this varies by foundry and era. Not all casting numbers follow the same format — some have additional letters or numbers that served internal foundry purposes and are not decoded in standard references.
Using casting numbers to verify originality
If you own a classic or muscle car and want to confirm the engine is original to the vehicle, the casting number is one of several clues. Cross-reference the casting number against a Chevrolet engine casting database — resources like the Chevrolet engine ID guide or dedicated forums maintain lists of known casting numbers and their production years. Match the foundry code and month-day to the vehicle's build date on the door jamb or trim tag.
An original 1970 Chevelle 454 should have a casting number that falls within the 1970 production window. If your block is stamped with a 1975 casting date but your car left the factory in 1970, the block is a replacement — not necessarily a problem, but important to know if you are restoring the car to original specifications or selling it.
Keep in mind that casting numbers alone do not prove originality. A block can be original to the car but have been rebuilt, bored, or decked. You will also need to check other details like the block's actual displacement, the head casting numbers, and whether the block matches the engine code on your vehicle's documentation.
Casting numbers versus other engine identifiers
Your Chevrolet engine has multiple stamped codes, and they serve different purposes. The engine block casting number identifies the block itself. The cylinder head casting number (stamped on the head) identifies the heads. The engine code (usually a letter or letter-number combination stamped on the block or head) indicates the original process — for example, "L" for a 350 in a Corvette versus "H" for a 350 in a truck.
The VIN (Vehicle Identification Number) is your car's unique identifier and includes a digit that codes the engine family, but it does not tell you the specific block's foundry or casting date. If you are trying to verify what engine is actually in your car, you need the casting numbers from the block and heads, not just the VIN.
What casting numbers do not tell you
A casting number will not reveal the displacement of the block. A 350 and a 400 small-block can have similar casting numbers if they were cast in the same foundry on the same day — the difference is in the bore and stroke, which you determine by measuring the block or checking the crankshaft. Casting numbers also do not indicate horsepower, compression ratio, or whether the block has been bored or decked.
If you need to know the exact displacement or performance specs, measure the bore diameter and check the crankshaft stroke, or consult the engine code and your vehicle's original documentation. The casting number is a starting point, not a complete engine history.
Finding casting number references for your engine
Several resources maintain databases of Chevrolet casting numbers. The Chevrolet engine ID guide (available in print and online) cross-references casting numbers to production years and foundries. Dedicated Chevrolet forums and small-block or big-block specialty sites often have searchable casting number lists compiled by enthusiasts. Some machine shops and engine rebuilders also keep reference materials.
When you search, have the complete casting number written down exactly as it appears on the block. If the number is partially worn or unclear, photograph it and post the image on a Chevrolet forum — experienced members can often read worn stamps better than you can in person. Include your vehicle's year and model so responders can narrow down the likely production window.
Frequently Asked Questions
Can I tell the year of my engine just from the casting number?
Not by itself. The casting number tells you the month and day the block was cast, but not the year. You need additional information — the vehicle's build date, the engine code, or other casting numbers on the engine — to narrow down the year. A block cast on December 15 could be from 1968, 1978, or 1988.
What if my casting number does not match any reference I can find?
Some casting numbers are rare, regional, or from outside suppliers that did not appear in standard references. Post the number and a photo on a Chevrolet-specific forum or contact a machine shop that specializes in Chevy engines. They may recognize it or have access to foundry records you do not.
Does a casting number tell me if the block is bored or decked?
No. Boring and decking are machine work done after casting. The casting number identifies the original block, but you have to measure the bore diameter and check the deck height yourself to know if the block has been modified.
Are casting numbers the same on all small-block Chevys?
No. Different foundries cast blocks at different times, so a 350 from Tonawanda in 1970 will have a different casting number than a 350 from Flint in 1975. Even blocks of the same displacement and year can have different casting numbers depending on which foundry produced them.
What if the casting number is worn off or illegible?
If the number is partially visible, try rubbing chalk or white paint over the stamped area to make the indentations stand out. If it is completely gone, you can still identify the block by measuring the bore and stroke, checking the head casting numbers, and reviewing the engine code — but you will lose the foundry and date information.