Motor mount replacement typically costs between $200 and $600 per mount, depending on which mount fails and what vehicle you drive.

A motor mount is a rubber-and-metal component that holds your engine in place while absorbing vibration as it runs. Most vehicles have three to four mounts. When one fails, you'll notice excessive engine movement, vibration through the steering wheel or floor, or clunking sounds when you shift gears. Replacing a single mount usually runs $200 to $400 in labor and parts combined at an independent shop, though luxury vehicles and trucks can reach $600 or more. If multiple mounts have failed—which sometimes happens together—you're looking at $800 to $1,500 total.

The cost breaks into two parts: the part itself and the labor to install it. A replacement mount costs $50 to $150 depending on your vehicle's make and model. Labor typically runs $150 to $400 per mount because the mechanic has to lift the engine slightly, unbolt the old mount, and bolt in the new one. Some vehicles require removing other components first, which adds time and cost. Dealerships charge more than independent shops—often 20 to 40 percent higher—because of their overhead and warranty coverage.

Key Takeaways

  • A single motor mount replacement costs $200 to $400 at an independent shop, with labor making up the majority of the expense.
  • The part itself costs $50 to $150, but labor ranges from $150 to $400 depending on how accessible the mount is on your vehicle.
  • Dealerships typically charge 20 to 40 percent more than independent shops for the same work.
  • Replacing multiple mounts at once costs less per mount than doing them separately because the mechanic doesn't have to re-lift the engine.
  • Ignoring a failed mount can damage the engine, transmission, or suspension, leading to repair bills of $1,000 or more.

Why the cost varies by vehicle type

Engine location and design determine how hard a mount is to reach. In a front-wheel-drive sedan, the engine sits sideways, and some mounts are accessible from the top or side without major disassembly. In a rear-wheel-drive truck or sports car, the engine runs lengthwise, and certain mounts may sit deep in the engine bay, requiring the removal of the radiator, air intake, or other components. A mechanic might spend 30 minutes on an accessible mount or three hours on a buried one.

Luxury vehicles and European imports often have higher parts costs because replacement mounts are less common and more specialized. A mount for a Honda Civic might cost $60, while the equivalent for a BMW or Mercedes can run $120 to $150. Some vehicles also use electronic mounts that adjust stiffness based on engine load; these cost significantly more and require computer programming after installation.

Labor time and shop rates

Most independent mechanics charge $80 to $150 per hour, while dealerships charge $120 to $200 per hour. A straightforward mount replacement takes one to two hours; a complex one takes three to four. This means labor alone ranges from $80 to $800 depending on the shop rate and the vehicle's design.

Get a written estimate before authorizing work. A reputable shop will tell you upfront whether they need to remove other parts and how long the job will take. If the estimate seems high, call another shop—prices vary enough that a second opinion is worth the phone call.

When to replace multiple mounts at once

Motor mounts wear out over time, and if one has failed, others are often close behind. Replacing all mounts while the engine is already lifted costs less per mount than doing them one at a time, because the mechanic avoids the setup and lift time for each subsequent job. If your vehicle has three mounts and one has failed, ask the mechanic to inspect the others. If two or more show significant wear, replacing them together usually saves $150 to $300 compared to separate visits.

However, if only one mount has clearly failed and the others feel solid, there's no reason to replace them preemptively. Mounts don't fail on a schedule; they fail when the rubber degrades or the metal cracks. Replacing worn but functional mounts is a judgment call between you and your mechanic.

Cost comparison: independent shop vs. dealership

FactorIndependent ShopDealership
Part cost$50–$150$80–$200
Labor rate per hour$80–$150$120–$200
Typical total (one mount)$200–$400$300–$600
Warranty on work12 months typical12–36 months typical
Warranty on partVaries by supplierManufacturer warranty

Independent shops often beat dealership prices by $100 to $200 per mount. However, dealerships may offer longer warranties on both the part and the labor, which matters if you plan to keep the vehicle for several more years. If your vehicle is still under manufacturer warranty, a dealership replacement might be covered entirely or partially, which changes the math completely.

What happens if you delay the repair

A failed motor mount doesn't cause when ready danger, but it accelerates wear on other components. Excessive engine movement can damage the radiator hoses, transmission mounts, or suspension components. It can also cause the engine to shift hard into gear, stressing the transmission. Over weeks or months, this can turn a $300 repair into a $1,000 or $2,000 repair.

You'll also experience increased vibration and noise, which makes the vehicle unpleasant to drive. If the mount failure is severe enough, the engine can contact the frame or other parts, causing when ready damage. The longer you wait, the more likely you are to face a larger bill.

How to get an accurate estimate

Call three shops and describe the symptoms: which mount you believe has failed (if you know), what you're hearing or feeling, and your vehicle's year, make, and model. Ask each shop for a written estimate that includes the part cost, labor hours, and total price. A good estimate will also note whether they plan to replace other mounts or just the failed one.

If one estimate is significantly lower than the others, ask why. It might be a competitive shop, or it might be a shop that's underestimating the job. If one is significantly higher, ask what's included that the others aren't. Some shops include a full engine inspection or a test drive after the repair; others don't.

Frequently Asked Questions

How do I know which motor mount has failed?

A mechanic can diagnose this by lifting the engine slightly and watching which mount moves excessively or has visible cracks in the rubber. You can also feel it yourself: have someone rev the engine while you watch from the side—a failed mount will let the engine rock noticeably. Clunking when shifting gears usually points to the transmission mount, while vibration at idle points to engine mounts.

Can I drive with a bad motor mount?

You can drive short distances, but it's not safe for long trips. The excessive movement can damage the radiator, transmission, or suspension. If the mount fails completely while driving, the engine could shift enough to damage hoses or belts. Get it repaired within a week or two.

Is it cheaper to replace the mount myself?

If you have a lift and mechanical experience, you can save $150 to $400 in labor. However, you need to safely lift the engine, which requires an engine hoist or careful use of a floor jack and jack stands. One mistake can cause serious injury. Most DIY mechanics only attempt this on vehicles where the mount is easily accessible.

Will my warranty cover a motor mount replacement?

If your vehicle is under the manufacturer's powertrain warranty (typically three years or 36,000 miles), motor mounts are usually covered. If you're past that, you're paying out of pocket. Extended warranties vary; check your paperwork or call your warranty provider.

Why do motor mounts fail?

The rubber degrades over time from heat, oil exposure, and constant vibration. Aggressive driving, towing, or rough roads accelerate the process. Most mounts last 5 to 10 years depending on driving conditions and vehicle design.