The Dart LS block is a lightweight, affordable engine block designed to accept Chevrolet LS-series cylinder heads and components, letting you build a high-performance engine without buying a complete factory LS engine.

Dart Machinery manufactures the LS block as an aftermarket casting that replicates the core structure of a real LS engine but gives builders the freedom to choose their own internals — pistons, rods, crankshaft, and heads. This matters because a factory LS engine costs $1,500 to $3,000 used, while a Dart LS block starts around $1,200 to $1,800 depending on the specific version. The real advantage is control: you pick the compression ratio, the bore size, and the internal strength rating based on what power level you're targeting.

The block comes in several versions. The most common are the Dart LS Next (entry-level, cast iron, good for street engines up to 500 horsepower) and the Dart LS7 (aluminum, thicker walls, rated for 700+ horsepower). There's also the Dart LS Sportsman, which sits between them in price and capability. Each version uses the same bolt pattern and mounting points as a factory LS, so LS cylinder heads, intake manifolds, and accessories bolt on without modification.

Key Takeaways

  • A Dart LS block costs $400 to $1,000 less than a used factory LS engine and lets you control the internal specifications.
  • The block accepts standard LS cylinder heads, intake manifolds, and accessories without modification, making parts sourcing straightforward.
  • Dart offers multiple versions rated for different power levels, from 500 horsepower street engines to 700+ horsepower race builds.
  • Building an engine around a Dart block requires machine shop work (honing, balancing, assembly) that adds $2,000 to $4,000 to the total cost.

How a Dart LS block differs from a factory LS engine

A factory LS engine is a complete assembly: block, heads, crankshaft, pistons, rods, intake, and accessories all matched and tested together. You bolt it in and it runs. A Dart LS block is just the block — the iron or aluminum casting with cylinder bores, oil passages, and mounting points. You then source or reuse a crankshaft, connecting rods, pistons, and cylinder heads separately and have a machine shop assemble them.

This separation gives you options a factory engine doesn't. If you want a 427-cubic-inch displacement instead of the factory 383, you can bore the block larger and use a longer-stroke crankshaft. If you want 12:1 compression for racing instead of 10:1 for street use, you choose pistons with that ratio. If you're building a budget engine, you can use cheaper used LS heads and a stock crankshaft. If you're building a race engine, you can buy forged internals rated for 8,000 RPM and high boost pressure.

The trade-off is that a Dart block requires machine work. The block arrives as a raw casting and must be honed to size, decked (the top surface machined flat), and inspected for defects. The crankshaft and rods must be balanced together. The whole assembly must be torqued and checked. A machine shop typically charges $2,000 to $4,000 for this work, depending on how much custom work is involved.

Dart LS block versions and their power ratings

Dart makes several LS blocks, each designed for a different power level and budget. The Dart LS Next is the entry point: cast iron, 4.005-inch bore, designed for street and mild performance engines. It's rated for up to 500 horsepower and costs roughly $1,200 to $1,400. It's heavier than aluminum but cheaper and durable for daily-driven cars and trucks.

The Dart LS7 is aluminum, thicker-walled, and rated for 700+ horsepower. It costs $1,600 to $1,800 and is the choice for serious performance builds, race engines, and forced-induction (supercharged or turbocharged) applications. The aluminum construction saves weight compared to cast iron, which matters in performance cars.

The Dart LS Sportsman sits between them: cast iron like the Next, but with some of the LS7's internal reinforcement. It's rated for 550 to 600 horsepower and costs $1,400 to $1,600. It's a middle ground for builders who want more durability than the Next but don't need the aluminum weight savings or extreme power rating of the LS7.

All three accept the same LS cylinder heads and accessories. The difference is in the casting quality, wall thickness, and rated maximum horsepower. Choosing the right one depends on your target power level and whether weight matters in your process.

What you need to build an engine around a Dart LS block

Beyond the block itself, you need a crankshaft, connecting rods, pistons, cylinder heads, intake manifold, and accessories. Many builders source these used from salvage yards or buy new aftermarket parts depending on budget and performance goals.

A used LS crankshaft and rod set costs $300 to $600. New forged rods and crankshaft run $800 to $1,500. Pistons range from $400 (used or budget new) to $1,200 (forged, high-compression). Cylinder heads can be sourced used for $400 to $800 per pair or bought new for $1,200 to $2,000. An intake manifold, valve covers, and accessories add another $300 to $800.

The machine shop work — boring, decking, balancing, and assembly — typically runs $2,000 to $4,000. This is where the total cost of a Dart block build can exceed a used factory LS engine. However, if you're targeting a specific displacement, compression ratio, or power level that a factory engine doesn't offer, the customization justifies the cost and labor.

Common reasons to choose a Dart LS block over a factory engine

Builders choose a Dart block when they need a specific configuration. If you're swapping an LS engine into a classic car and want to keep the engine bay tight, an aluminum Dart LS7 block weighs less than a factory iron block. If you're building a 427-cubic-inch stroker engine for a truck, you can't buy that as a factory assembly — you build it on a Dart block. If you're forced-induction tuning and need 12:1 compression and forged internals, a Dart block with custom pistons and rods gives you that control.

Cost is another factor. A Dart LS Next block plus used internals and machine work can total $4,500 to $5,500, which is competitive with a low-mileage factory LS engine ($3,500 to $5,000) when you factor in the customization you get. If you already have some LS internals on hand — a crankshaft from a donor engine, heads from a parts car — a Dart block can be the cheapest way to assemble a complete engine.

Compatibility with LS cylinder heads and accessories

One of the main reasons Dart LS blocks are popular is that they use the same bolt pattern and mounting points as a factory LS engine. Any LS cylinder head — factory, Edelbrock, Trick Flow, Brodix, or others — bolts directly to a Dart block. The same applies to intake manifolds, valve covers, oil pans, and accessory brackets. This means you can use affordable used LS parts without custom fabrication.

However, some older or specialty heads may require minor modifications. Always confirm with the machine shop or head supplier that your chosen heads are compatible with the specific Dart block version you're using. Most are, but it's worth verifying before ordering parts.

When a Dart LS block makes sense versus other options

A Dart block is the right choice if you want a custom displacement, compression ratio, or power level that a factory engine doesn't offer. It's also sensible if you already have some LS internals and want to assemble them into a complete engine. If you're building a race engine or a forced-induction process, the ability to choose forged internals and high-strength components justifies the machine work.

A used factory LS engine makes more sense if you want a complete, tested assembly that's ready to bolt in with minimal work. Factory engines are often cheaper upfront and require no machine shop time. If you're doing a straightforward swap and don't need custom specs, a factory engine is faster and simpler.

A crate engine — a new, complete engine from a manufacturer like GM Performance or Chevrolet Performance — is the premium option. It comes with a warranty, is dyno-tested, and requires no assembly. It costs $4,000 to $8,000 depending on the power level, but you get a known quantity and factory support.

Frequently Asked Questions

Can I use a Dart LS block with factory LS heads and intake?

Yes. Dart LS blocks use the same bolt pattern as factory LS engines, so factory LS cylinder heads, intake manifolds, and accessories bolt on without modification. This is one of the main advantages of the Dart block — you can mix and match LS components.

How much does it cost to machine and assemble a Dart LS block?

Machine shop work typically runs $2,000 to $4,000, depending on the complexity. This includes boring, decking, honing, balancing the crankshaft and rods, and final assembly. Some shops charge less for basic street builds and more for race engines or custom work.

What's the difference between the Dart LS Next and the Dart LS7?

The LS Next is cast iron, rated for up to 500 horsepower, and costs $1,200 to $1,400. The LS7 is aluminum, rated for 700+ horsepower, and costs $1,600 to $1,800. Choose the Next for street engines and the LS7 for high-power or forced-induction builds.

Is a Dart LS block cheaper than buying a used factory LS engine?

The block itself is cheaper, but the total cost is similar once you add internals and machine work. A Dart block build typically totals $4,500 to $5,500, while a used factory LS engine runs $3,500 to $5,000. The advantage of a Dart block is customization, not cost savings.

Do I need a machine shop to assemble a Dart LS block?

Yes. A Dart block arrives as a raw casting and requires professional machine work before assembly. You cannot reliably assemble an engine without proper honing, decking, and balancing. Attempting it without a shop will result in poor performance or engine failure.