Finding Your Carburetor's Model Number and Date Code
The fastest way to identify a Holley carburetor is to locate the casting number and date code stamped into the metal body itself. These two pieces of information tell you the model, when it was made, and what engine it was originally designed for. You do not need to remove the carburetor from your engine to read them—you just need to know where to look and what the numbers mean.
The casting number is usually stamped on the passenger side of the main body, below the fuel inlet. It is a four or five-digit number that identifies the specific carburetor design. The date code appears nearby and consists of a letter (the month) followed by a number (the year). For example, "J7" means June 1977. Once you have both numbers, you can cross-reference them against Holley's identification system to learn the carburetor's specifications, jetting, and intended process.
If the numbers are worn or hard to read, take a photo with good lighting and zoom in on your phone. Rubbing a pencil lightly over the stamped area can also make the numbers stand out. Write down exactly what you see—Holley's system is precise, and a single digit wrong will point you to the wrong carburetor.
Key Takeaways
- The casting number and date code are stamped directly on the carburetor body and identify the model, year, and original engine process without removing the carburetor.
- The casting number is a four or five-digit code on the passenger side below the fuel inlet; the date code is a letter and number indicating month and year of manufacture.
- Holley carburetors designed for street engines, racing, and marine use have different casting numbers even if they look similar, so the casting number tells you the intended purpose.
- If you cannot find a casting number, the carburetor may be a clone or aftermarket reproduction, which means you will need to measure the bore and count the jets to determine its specifications.
Understanding Holley's Casting Number System
Holley's casting numbers follow a pattern that reveals the carburetor's size, fuel delivery system, and original process. A four-digit number like 4150 or 4160 tells you the bore diameter (the opening where air enters) and whether it has a vacuum secondary or mechanical secondary (the second stage that opens under load). A five-digit number like 80457 or 80508 is typically a later design or a variant built for a specific manufacturer.
The first digits usually indicate the bore size. A 4150 has a 1.5-inch primary bore, while a 4160 has a 1.625-inch bore. The last digit often signals the fuel delivery type: a 0 usually means vacuum secondary (common on street cars), while a 1 or higher may indicate mechanical secondary or a specific internal configuration. Holley made thousands of variations, so the casting number is your key to finding the exact specifications and tuning data for your carburetor.
If you are rebuilding or tuning the carburetor, the casting number tells you which jets, needles, and metering rods came from the factory. This matters because a carburetor jetted for a 350 Chevy will run lean on a 454, and you need to know the original setup before you change anything. Holley publishes specification sheets for each casting number, and many online carburetor forums maintain searchable databases of these numbers and their applications.
Reading the Date Code and What It Tells You
The date code on a Holley carburetor is a single letter followed by one or two digits. The letter represents the month (A = January, B = February, and so on through L = December), and the number is the year. A code of "E5" means May 1965; "J82" means June 1982. This code does not tell you when the carburetor was installed in your car—it tells you when Holley manufactured it at the factory.
The date code is useful for verifying whether a carburetor is original to your vehicle or a replacement. If your car is a 1978 model and the carburetor is dated "A76" (January 1976), it was likely installed as a replacement or carried over from an earlier model year. If the date is much later than your car's year, the carburetor is definitely not original. This matters if you are restoring a classic car and want to use period-correct parts, or if you are trying to understand the maintenance history of an older engine.
The date code also helps you find the right tuning specifications. Holley made design changes and updates throughout the years, and a carburetor from 1970 may have different internal passages or jet sizes than one from 1975, even if they share the same casting number. Knowing the exact year narrows down which version you have and which specification sheet applies to your rebuild.
Locating the Casting Number on Different Holley Models
On most street carburetors (the 4150 and 4160 series), the casting number is stamped on the driver's side of the main body, just below where the fuel line connects. Look for a raised or recessed area of metal with numbers pressed into it. On some models, you may need to remove the air cleaner or look from underneath to see it clearly. Use a flashlight and take your time—the stamping is permanent and will not wear off, but it can be hard to spot if you do not know where to look.
On racing carburetors and some marine models, the casting number may be on the passenger side or on the throttle body (the lower section). If you cannot find it on the main body, check the fuel bowl and the base plate. Holley also made carburetors for specific manufacturers like Ford and Chevrolet, and some of these have the casting number in a different location or use a manufacturer-specific part number instead. If you are working on a carburetor that came on a factory engine, the manufacturer's part number may be more useful than the Holley casting number.
Take a photo of the stamped area from multiple angles and with different lighting. If the number is still hard to read, you can make a rubbing by placing a piece of paper over the stamped area and rubbing it gently with a pencil. This technique works well for worn or shallow stampings and can reveal numbers that are otherwise invisible.
What to Do If You Cannot Find a Casting Number
If the casting number is missing, worn away, or you are working with a carburetor that has no visible stamping, you can still identify it by measuring and inspecting the internal components. Start by measuring the bore diameter (the opening at the top where air enters) with a caliper or ruler. A 1.5-inch bore is a 4150-series carburetor; a 1.625-inch bore is a 4160-series. A 1.75-inch or larger bore is a larger model, often used for racing or high-displacement engines.
Next, remove the fuel bowl and look at the number and size of the jets (the small brass fittings that control fuel flow). Count how many jets you see and note their size if it is stamped on them. Look at the secondary mechanism—if it moves freely when you move the throttle linkage, it is a mechanical secondary. If it does not move until you explore vacuum (by sucking on the vacuum line), it is a vacuum secondary. These observations, combined with the bore size, will narrow down the model significantly.
If the carburetor is a reproduction or aftermarket clone, it may not have a Holley casting number at all. In that case, you will need to identify it by its appearance and specifications. Many online carburetor forums have photo galleries where you can compare your carburetor to known models. If you are still stuck, a carburetor shop or a forum dedicated to your engine type can often identify it from a photo and description of its size and features.
Using the Casting Number to Find Tuning Data and Rebuild Kits
Once you have the casting number and date code, you can find the original factory specifications for your carburetor. Holley publishes specification sheets that list the primary and secondary jet sizes, needle positions, float level, and other tuning data. These sheets are available from Holley directly, from carburetor supply shops, and from many online forums and databases. Having the correct original specifications is essential if you are rebuilding the carburetor or trying to diagnose a running problem.
The casting number also tells you which rebuild kit to order. Holley makes different kits for different models, and using the wrong kit can result in missing gaskets, seals, or internal parts. When you order a rebuild kit, give the supplier the casting number and date code, and they will send you the correct kit for your carburetor. A complete rebuild kit includes all the gaskets, seals, jets, needles, and springs needed to restore the carburetor to factory condition.
If you are modifying the carburetor for a different engine or process, the casting number tells you the starting point. A carburetor designed for a 350 Chevy can be rejetted for a 454, but you need to know the original jetting and the internal flow characteristics to make the change correctly. Holley's specification sheets and tuning guides provide this information, and many performance shops use the casting number to determine what changes are possible and what parts may need to be replaced.
Common Holley Casting Numbers and Their Applications
The 4150 series is the most common street carburetor Holley made. It has a 1.5-inch primary bore and was used on countless engines from the 1960s onward. The 4160 is similar but has a 1.625-inch bore and was often used on larger or higher-performance engines. Both come in vacuum secondary and mechanical secondary versions, and both are still available as rebuild kits and replacement carburetors today.
The 80457 and 80508 are later Holley designs with smaller bores (around 1.25 inches) and were often used on fuel-injected or computer-controlled engines in the 1980s and 1990s. The 4165 and 4175 are larger carburetors with 1.75-inch and larger bores, designed for racing and high-displacement engines. The 2300 series is a two-barrel carburetor, smaller and simpler than the four-barrel models, and was common on economy and mid-range engines.
If you are searching online for your carburetor's specifications, include the casting number and date code in your search. This will filter out unrelated results and take you directly to the information you need. Many carburetor forums and restoration sites have searchable databases organized by casting number, which can save you hours of searching.
Frequently Asked Questions
Where exactly is the casting number stamped on a Holley carburetor?
On most four-barrel models, it is on the driver's side of the main body just below the fuel inlet. On some models it may be on the passenger side or on the throttle body. Use a flashlight and look carefully—it is a permanent stamping in the metal, usually four or five digits. If you cannot find it on the main body, check the fuel bowl and base plate.
Can I identify a Holley carburetor without removing it from the engine?
Yes. The casting number and date code are stamped on the outside of the carburetor body and are readable without removal. You may need to remove the air cleaner or look from underneath to see them clearly, but you do not need to take the carburetor off the engine. Take a photo with good lighting and zoom in if the numbers are hard to read.
What does the date code letter mean?
The letter represents the month of manufacture: A = January, B = February, C = March, and so on through L = December. The number that follows is the year. A code of "J7" means the carburetor was made in June 1977. This tells you when Holley built it, not when it was installed in your car.
If my carburetor has no casting number, is it a fake?
Not necessarily. Some aftermarket and reproduction carburetors do not have Holley casting numbers. Some older carburetors may have had the number worn away. You can still identify it by measuring the bore diameter, counting the jets, and checking whether the secondary is vacuum or mechanical. Online forums and carburetor shops can often identify it from a photo and description.
Why does the casting number matter if I am just rebuilding the carburetor?
The casting number tells you which rebuild kit to order and what the original factory specifications were. Using the wrong kit can result in missing parts or incorrect gaskets. Knowing the original jetting and tuning data is also essential if you are diagnosing a running problem or planning to modify the carburetor for a different engine.