A transfer flow fuel tank is an aftermarket auxiliary tank that sits in or under your truck bed and feeds fuel to your main tank, extending your driving range without stopping to refuel
Transfer Flow makes several models designed for different truck platforms—Dodge, Ford, Chevy, and others. The tank connects to your factory fuel system with a pickup tube and electric pump. When your main tank drops below a set level, the auxiliary tank automatically transfers fuel over, keeping you on the road longer. This is different from a straightforward fuel cell or jerry can; it's a permanent, integrated system that works without you having to do anything.
The real benefit is range. A typical Transfer Flow tank holds 40 to 60 gallons depending on the model. On a truck that gets 15 miles per gallon, that's an extra 600 to 900 miles between fill-ups. For people who tow, work in remote areas, or take long trips where fuel stops are far apart, that matters. You're not carrying extra weight all the time—the fuel is there when you need it, and it feeds automatically.
Key Takeaways
- A Transfer Flow tank is a permanent auxiliary fuel system that mounts under or in your truck bed and automatically transfers fuel to your main tank as it empties.
- These tanks add 40 to 60 gallons of capacity, which can extend your range by 600 to 900 miles depending on your truck's fuel economy.
- Installation requires running fuel lines and an electrical connection to the pump, and should be done by a shop familiar with fuel system work to avoid leaks or fire risk.
- The system is most useful for people who tow regularly, work in remote areas, or take long highway trips where fuel stations are scarce.
- Maintenance involves checking fuel quality and ensuring the pump and pickup tube stay clear of debris or water contamination.
How the automatic transfer system works
Transfer Flow tanks use a float switch or electronic sensor in your main tank to trigger the transfer pump. When the main tank level drops to a preset point—usually around one-quarter full—the pump in the auxiliary tank kicks on and pushes fuel through a line into your main tank. The pump shuts off once the main tank reaches a higher level, usually around three-quarters full. This cycle repeats as you drive, so you're always drawing from the main tank while the auxiliary tank tops it off.
The pump is electric and runs off your truck's battery and electrical system. It draws very little current—typically 5 to 10 amps—so it won't drain your battery or strain your alternator. The whole process is silent and automatic; you won't notice it happening. The fuel line runs under your truck from the auxiliary tank to the main tank, usually protected by the frame or routed along existing fuel lines to avoid damage.
One important detail: the system is designed to transfer fuel, not to let you draw from both tanks at once. You're always using your main tank. The auxiliary tank is a reserve that keeps the main tank full as long as there's fuel in the auxiliary. Once the auxiliary tank is empty, you're back to your factory range.
Installation and what it involves
Transfer Flow tanks are not a bolt-on job. Installation requires dropping or removing your truck bed, running fuel lines from the auxiliary tank to your main tank, installing the pickup tube and pump inside the auxiliary tank, and wiring the pump to a relay and switch. A shop that does fuel system work—not just general service—should handle this. Mistakes in fuel line routing, connections, or electrical work can cause leaks, fuel odor, or fire risk.
The tank itself bolts to the frame under the bed or sits inside the bed depending on the model. Some Transfer Flow tanks are designed to fit between the frame rails without taking up bed space; others mount in the bed and reduce your cargo area. Check the specifications for your truck before ordering to understand the trade-off. Installation typically takes a full day and costs between $1,500 and $3,000 in labor, depending on your truck's design and the shop's rates.
After installation, the system should be tested for leaks before you drive it. A good shop will run the pump, check all connections, and verify that fuel actually transfers from the auxiliary tank to the main tank. They should also show you how to check fuel level in the auxiliary tank—some models have a sight gauge on the side, others require a dip stick or electronic display.
Maintenance and fuel quality
A Transfer Flow tank requires less maintenance than you might think, but what it does need matters. The pump and pickup tube can become clogged if your fuel contains water or sediment. This is why fuel quality is important—use fuel from busy stations where the tanks are turned over regularly, and avoid letting your truck sit for months with old fuel in the auxiliary tank. If you store your truck for a season, consider running the auxiliary tank down or adding a fuel stabilizer.
Check the fuel level in your auxiliary tank regularly, especially if you're using the system actively. Some people forget they have an auxiliary tank and run it dry, then wonder why the transfer pump isn't working. If the pump stops working or you hear it running constantly without transferring fuel, the pickup tube may be clogged or the float switch may have failed. These are repair jobs for a fuel system shop, not something to ignore.
The electrical connections should be inspected periodically to make sure they're clean and tight. Corrosion at the pump connector can prevent the pump from running. If you notice the pump isn't kicking on when your main tank gets low, check the connector first before assuming the pump is dead.
Fuel economy and weight considerations
Adding 40 to 60 gallons of fuel adds weight—roughly 240 to 360 pounds depending on how full the tank is. This will reduce your fuel economy slightly, typically by 0.5 to 1.5 miles per gallon. The trade-off is usually worth it if you're towing or driving long distances, because the extra range more than makes up for the slight efficiency loss. If you're mostly driving around town, the weight penalty may not be worth it.
Some Transfer Flow tanks are designed to be as low-profile as possible to minimize the effect on your truck's center of gravity and handling. Tanks that mount under the frame are better for this than tanks that sit high in the bed. If you tow frequently, ask the shop about tank placement and how it affects your truck's balance.
When a transfer flow tank makes sense
A Transfer Flow tank is most useful if you tow regularly, work in areas where fuel stops are 100+ miles apart, or take frequent long road trips. It's less necessary if you drive mostly in town or on routes with fuel stations every 50 miles. The cost and installation hassle are real, so think about how often you'd actually use the extra range.
If you're considering one, talk to other owners of your truck model about their experience. Some trucks have better fuel economy or larger factory tanks than others, which changes the math. A truck that gets 20 miles per gallon and has a 30-gallon factory tank already has 600 miles of range; adding 50 gallons might be overkill. A truck that gets 12 miles per gallon and has a 25-gallon tank has only 300 miles of range, so an auxiliary tank becomes much more valuable.
Alternatives to consider
Before committing to a Transfer Flow tank, consider whether a simpler solution fits your needs. A quality fuel can or jerry can mounted on a rack costs far less and gives you emergency range without permanent installation. You won't get automatic transfer, but you have flexibility—you can carry it only when you need it, and you can use it in other vehicles.
Some trucks have larger factory fuel tanks available as an option or upgrade. If you're buying a new truck, checking the tank size before you order can save you the cost of an auxiliary system later. A few newer trucks also have factory auxiliary tank options, though these are less common.
If range is your main concern and you're open to different solutions, also think about your actual driving patterns. Many people buy auxiliary tanks and rarely use them. A jerry can in the truck bed costs $100 to $300 and solves the same problem for occasional long trips.
Frequently Asked Questions
Can I install a Transfer Flow tank myself?
Not safely. Fuel system work requires knowledge of proper line routing, connection standards, and electrical safety. A mistake can cause fuel leaks or fire risk. Have a shop that specializes in fuel systems do the installation.
What happens if the transfer pump fails?
The auxiliary tank becomes a dead weight. You'll still have your factory fuel range from the main tank, but the auxiliary tank won't feed fuel. The pump can usually be replaced without removing the entire tank, though it requires dropping the bed or tank to access it.
Can I use a Transfer Flow tank with a diesel truck?
Yes. Transfer Flow makes diesel-specific models. Diesel fuel has different properties than gasoline, so use a tank designed for your fuel type. Do not use a gasoline tank for diesel or vice versa.
Does the auxiliary tank need to be filled every time I fill up?
No. Fill it when you're planning a long trip or heading to a remote area. For daily driving, you can leave it empty. Some people keep it topped off all the time; others fill it only before towing or long highway drives.
Will a Transfer Flow tank affect my truck's warranty?
It depends on your truck's manufacturer and warranty terms. Some manufacturers void warranty on fuel system components if you modify them. Check your warranty documents or contact your dealer before installation to understand what you might lose.