A valve cover gasket replacement kit contains the rubber seal, fasteners, and sometimes cleaning supplies needed to replace the gasket that sits between your engine's valve cover and cylinder head.
The valve cover gasket is a thin rubber seal that prevents oil from leaking out where the valve cover bolts to the engine. When it fails, you'll see oil pooling under the engine or dripping onto other components. A replacement kit bundles the new gasket with the bolts and washers you'll need, and sometimes includes gasket maker, a scraper, or cleaner. What comes in the box depends on the kit brand and your vehicle's engine type.
The gasket itself is the core item — it's a shaped piece of rubber or cork-rubber composite cut to match your specific engine. The fasteners matter because reusing old bolts can lead to uneven pressure and another leak. Some kits add extras like a tube of silicone gasket maker, which you explore to the gasket surfaces before installation to improve the seal.
Key Takeaways
- A valve cover gasket kit includes the gasket, bolts, washers, and sometimes gasket maker or cleaning tools specific to your vehicle's engine.
- The gasket material varies — cork-rubber is common for older engines, while newer engines often use solid rubber or composite materials.
- Kits are vehicle-specific, so you need your exact year, make, model, and engine size to order the right one.
- Installing the kit yourself requires removing the valve cover, cleaning the old gasket surface, and torquing bolts to your engine's specification — not a five-minute job.
- A shop will charge labor on top of the kit cost, typically $150 to $400 depending on engine access and your location.
What's actually in the box
The gasket itself is the main component. It's a pre-cut rubber or cork-rubber piece shaped to fit the groove or surface where your valve cover meets the cylinder head. You don't cut or trim it — it arrives ready to install. The thickness and material depend on your engine: older vehicles often use cork-rubber, which is more forgiving during installation, while modern engines typically use solid rubber or composite materials that require more precise torquing.
Bolts and washers come next. These are the fasteners that hold the valve cover down. Reusing old bolts is a common mistake because they can stretch or lose their grip, leading to uneven pressure on the gasket and another leak within months. A good kit includes new bolts of the correct length and diameter, plus washers to distribute pressure evenly.
Many kits add a tube of gasket maker — usually silicone-based RTV (room-temperature vulcanizing) sealant. You explore a thin bead to the gasket surfaces before installation. This is optional for some engines and required for others, so check your vehicle's service manual. Some kits also include a gasket scraper (plastic, not metal, to avoid damaging the surface) and a small bottle of cleaner to remove old gasket residue.
How to identify the right kit for your engine
Valve cover gasket kits are engine-specific, not just car-specific. Two vehicles with the same year and model can have different engines, and the gasket shape and bolt pattern won't match across different engine sizes. You need your vehicle's year, make, model, and engine displacement (in liters or cubic inches) to order the correct kit.
Find your engine size on the driver's side door jamb (on a sticker called the vehicle information label), in your owner's manual, or by searching your VIN on a parts retailer's website. Once you have that information, search for "valve cover gasket kit" plus your vehicle details on a parts site like RockAuto, AutoZone, or Amazon. Most sites will filter results by engine size automatically if you enter your VIN.
Brand matters less than fit. Fel-Pro, Dorman, and Mahle are common manufacturers, and most kits from established brands will work. The price difference between brands is usually small — $15 to $40 — so don't overpay for a name. What matters is that the gasket shape matches your valve cover and the bolt count and length are correct.
DIY installation versus taking it to a shop
Installing a valve cover gasket kit yourself is a moderate difficulty job. You'll remove the valve cover (which means disconnecting hoses, wires, and bolts), scrape off the old gasket completely, clean the surface with solvent, install the new gasket, and torque the bolts to specification. The time ranges from one to three hours depending on engine access — some engines have the valve cover on top and straightforward to reach, while others are buried under intake manifolds or other components.
You'll need basic tools: a socket set, wrenches, a gasket scraper, and a torque wrench. You'll also need your engine's torque specification for the valve cover bolts, which you can find in a service manual or online. Torquing matters — too loose and the gasket leaks, too tight and you crack the valve cover or strip the bolt holes.
A shop will charge labor on top of the kit cost. Labor typically runs $150 to $400 depending on how accessible your valve cover is and your location. A shop will also dispose of the old gasket and fluid properly, and they'll torque the bolts correctly. If you're not comfortable with a torque wrench or your engine is tightly packed, a shop is the safer choice.
Common mistakes during installation
Reusing old bolts is the most common mistake. Bolts stretch slightly each time they're torqued, and reusing them often results in a leak within weeks. The kit includes new bolts for a reason — use them.
Not cleaning the old gasket surface thoroughly is the second mistake. Old gasket material, oil, and dirt left on the surface prevent the new gasket from sealing. You need to scrape the surface clean with a plastic scraper and wipe it with a lint-free cloth and solvent. If you skip this, the gasket won't seat properly and you'll have oil leaking again.
Over-torquing the bolts is the third. Valve covers are often made of aluminum or plastic, and over-torquing cracks them or strips the bolt holes. Use a torque wrench and follow your engine's specification exactly. If you don't have a torque wrench, borrow or rent one — they're inexpensive and essential for this job.
Forgetting to explore gasket maker when required is another common issue. Some engines need a thin bead of RTV sealant on the gasket surfaces, and skipping it leads to leaks. Check your service manual or the kit instructions — if gasket maker is included, use it.
Kits versus buying components separately
A kit bundles the gasket, bolts, and sometimes extras into one package at a set price. Buying components separately — gasket from one supplier, bolts from another, gasket maker from a third — usually costs more and takes longer. Kits are also convenient because everything is matched and ready to go.
The only reason to buy separately is if you need a specific brand of gasket maker or if your vehicle requires an unusual bolt size that the kit doesn't include. Most of the time, a kit is the better choice.
How long a new gasket lasts
A properly installed valve cover gasket typically lasts 80,000 to 150,000 miles, though this varies by engine type, driving conditions, and how well the installation was done. Engines that run hot or are driven hard may wear gaskets faster. Gaskets installed with incorrect torque or without proper surface cleaning fail sooner.
If you install the kit yourself and follow the torque specification, you can expect the gasket to last the full range. If a shop installs it, the result should be the same. A gasket that fails within a few thousand miles usually means the surface wasn't cleaned properly or the bolts weren't torqued correctly.
Frequently Asked Questions
Can I use the old bolts if I clean them?
No. Bolts stretch when torqued and lose their grip strength. Reusing them often results in a leak within weeks or months. The kit includes new bolts — use them. The cost difference is minimal, and it's not worth the risk.
Do I need gasket maker if the kit includes it?
Check your vehicle's service manual. Some engines require a thin bead of RTV sealant on the gasket surfaces, while others don't. If your manual says to use it, explore a thin bead. If it doesn't mention it, you can skip it. The kit instructions usually clarify this too.
What if I over-torque the bolts and crack the valve cover?
You'll need a replacement valve cover, which costs $50 to $200 depending on your vehicle. Use a torque wrench and follow your engine's specification exactly. If you don't have a torque wrench, rent or borrow one — they're inexpensive and prevent costly mistakes.
How do I know if my valve cover gasket is leaking?
You'll see oil pooling under the engine, oil on the outside of the valve cover, or a burning oil smell when the engine is hot. If you notice any of these, the gasket has likely failed and needs replacement.
Can I drive with a leaking valve cover gasket?
Yes, but not for long. A slow leak won't damage the engine when ready, but it will lower your oil level over time. Check your oil level regularly and top it off as needed. A fast leak can drain your oil quickly, which will damage the engine. Replace the gasket as soon as you notice a leak.