What you need to know before buying a replacement screen

The 2013 Ram 1500 came with either an AM/FM radio with a small LCD display or an integrated touchscreen unit as part of the Uconnect system. If your screen is cracked, won't display, or you want to upgrade to a modern unit, you have two realistic paths: replace just the display panel if your radio still powers on, or swap the entire head unit for an aftermarket system. The choice depends on whether your current radio works mechanically and what features you want in the replacement.

A display-only replacement costs less but works only if your existing radio's tuner and buttons still function. A full head unit replacement gives you modern features like Apple CarPlay or Android Auto, but requires dash work and may need additional wiring adapters depending on which unit you choose.

Key Takeaways

  • The 2013 Ram 1500 uses either a basic LCD display or a Uconnect touchscreen, and which one you have determines your replacement options.
  • Display-only replacements cost $80 to $200 and work if your radio's tuner and buttons still function, but aftermarket head units ($150 to $600) replace the entire unit and add modern features.
  • Aftermarket head units require a DIN-sized dash kit (specific to Ram 1500), a wiring harness adapter, and sometimes an antenna adapter to fit properly.
  • Professional installation at a car audio shop typically costs $100 to $300 in labor and ensures proper integration with your truck's steering wheel controls.
  • If you keep the factory radio, you will lose steering wheel control integration unless you buy a steering wheel control adapter ($30 to $60).

Display replacement for a working factory radio

If your radio powers on, responds to button presses, and tunes stations but the screen is dark or cracked, you may be able to replace just the display panel. OEM replacement screens for the 2013 Ram 1500 basic radio run $80 to $150 from Mopar or third-party suppliers. This is the cheapest option and preserves your factory integration, including steering wheel controls and any existing Bluetooth if your radio has it.

The catch is availability and difficulty. Mopar screens for the basic radio are easier to find than Uconnect display replacements, which are more expensive and harder to source used. Installation requires removing the radio from the dash, opening the case, and swapping the display panel—a task that takes 30 minutes to an hour if you are comfortable with small electronics, or $100 to $150 at a shop if you are not. If your radio does not power on at all, or if the tuner is dead, a display replacement will not help you.

Aftermarket head unit installation and compatibility

An aftermarket head unit replaces the entire radio and gives you modern features: touchscreen, Apple CarPlay, Android Auto, Bluetooth, and backup camera input. Popular choices for the 2013 Ram 1500 include Sony, Alpine, Kenwood, and Pioneer units in the $200 to $600 range. You will need three things to make it fit and work: a DIN-sized dash kit specific to the Ram 1500 (around $30 to $50), a wiring harness adapter that connects your truck's factory harness to the new radio ($20 to $40), and possibly an antenna adapter if your new unit uses a different connector ($10 to $20).

The Ram 1500's dash is designed for a single-DIN or double-DIN radio, so any standard-sized aftermarket unit will fit with the right dash kit. The wiring harness adapter is critical—it lets you plug the new radio into your truck's existing connectors without cutting factory wires. Metra and Scosche make the most common adapters for the 2013 Ram 1500. If you want to keep steering wheel controls (volume, seek, source), you will also need a steering wheel control adapter ($30 to $60), which translates your factory buttons into commands the new radio understands.

Installation labor and what to expect at a shop

Professional installation at a car audio shop typically costs $100 to $300 depending on your location and whether you want additional work like backup camera wiring or amplifier integration. The shop will remove your factory radio, install the dash kit, connect the wiring harness and antenna adapters, test the new unit, and program steering wheel controls if you have added that adapter. The whole job usually takes one to two hours.

If you install it yourself, you will need a radio removal tool (a flat metal tool shaped like a U, usually $5 to $10 or sometimes included with the new radio), a screwdriver set, and patience. The hardest part is usually running the antenna cable and making sure the new unit sits flush in the dash. Many people find the labor cost worth it to avoid damaging trim pieces or the radio itself during removal.

Preserving steering wheel controls with your new radio

The 2013 Ram 1500 has steering wheel controls for volume, seek, and source selection. If you install an aftermarket head unit without an adapter, these buttons will stop working. A steering wheel control adapter (also called a steering wheel interface) translates your factory button signals into commands the new radio understands. Metra, PAC, and iSimple make adapters for the Ram 1500; most cost $30 to $60 and plug between your steering wheel harness and the new radio's harness.

Installation takes an extra 15 to 30 minutes because the adapter needs to be hidden behind the dash. If you skip the adapter, you lose steering wheel control but the radio will still work normally—you will just use the touchscreen or physical buttons on the unit instead. Some newer aftermarket radios have better steering wheel control compatibility than others, so check the product listing before you buy to see if a specific adapter is recommended.

Backup camera and other integrations

If your 2013 Ram 1500 has a factory backup camera (standard on some trims), you can integrate it with an aftermarket head unit that has a camera input. The camera wire usually runs from the rear of the truck through the frame to the factory radio location. When you remove the factory radio, you will see this wire; you can disconnect it and connect it to your new radio's camera input instead. Most aftermarket units have a dedicated camera input that automatically switches the display to the camera feed when you shift into reverse.

If your truck does not have a factory backup camera but you want to add one, the new radio's camera input makes this easier than it would be with the factory radio. You will need to run the camera wire from the rear bumper to the head unit location, a job that typically costs $150 to $250 at a shop if you do not want to do it yourself. Aftermarket cameras run $80 to $200 depending on resolution and night vision quality.

Comparing your options side by side

OptionCost (parts)Cost (labor)Time to installKeeps factory integrationModern features
Display replacement only$80–$150$100–$15030 min–1 hourYesNo
Aftermarket head unit (no extras)$200–$600$100–$3001–2 hoursNo (without adapter)Yes
Aftermarket head unit + steering wheel adapter$230–$660$100–$3001.5–2.5 hoursYesYes
Aftermarket head unit + backup camera$280–$800$250–$5002–3 hoursPartialYes

Frequently Asked Questions

Can I install an aftermarket radio myself if I have never done it before?

Yes, but take your time. The radio removal tool and wiring harness adapter make it straightforward if you follow the instructions. The biggest risk is damaging the dash trim during removal. Watch a video for your specific radio model first, and do not force anything—if something does not slide out easily, you are probably pulling the wrong direction.

Will my factory Bluetooth still work with an aftermarket radio?

No. The factory Bluetooth is built into the factory radio, so when you remove it, that Bluetooth is gone. However, most aftermarket head units have their own Bluetooth built in, so you will pair your phone to the new radio instead. The process is the same from your phone's perspective.

What if my new radio does not fit in the dash even with a dash kit?

This is rare with standard double-DIN units and a proper Ram 1500 dash kit, but it can happen if you buy a radio with unusual dimensions. Check the product listing and reviews from other Ram 1500 owners before you buy. If it does not fit, most retailers will accept a return.

Do I need to disconnect the battery before I start?

It is a good idea to disconnect the negative battery terminal before you remove the factory radio, especially if you are working with the steering wheel controls. This prevents accidental shorts and protects the truck's electrical system. Reconnect it after everything is installed and tested.

Can I keep my factory radio and just upgrade the screen later?

If your factory radio still works, yes—a display replacement is a valid long-term option. However, you will not get modern features like CarPlay or Android Auto, and replacement screens for the Uconnect system are expensive and harder to find used. Most people who want those features end up replacing the whole unit eventually.