A Cummins delete kit removes emissions control systems from your 2018 Cummins diesel engine

A delete kit is a set of mechanical and software modifications that bypass or remove the emissions control equipment on your 2018 Cummins engine. The most common deletions target the diesel particulate filter (DPF), the selective catalytic reduction (SCR) system, and the exhaust gas recirculation (EGR) cooler. When these systems are deleted, the engine no longer routes exhaust through filters or injects urea into the exhaust stream—it sends exhaust straight out the tailpipe.

Deleting these systems changes how your engine runs. You'll see an increase in power output, better fuel economy in some driving conditions, and elimination of the regeneration cycles that periodically clog your engine with soot. But deletion also means your truck no longer meets federal emissions standards, and the modification carries legal and mechanical consequences you need to understand before you commit to it.

Key Takeaways

  • A delete kit removes the DPF, SCR, and EGR systems and reprograms the engine computer to stop monitoring them, which is illegal for on-road use in all 50 states under the Clean Air Act.
  • Deleted engines produce more power and torque, run cooler, and avoid DPF regeneration cycles that reduce fuel economy and create maintenance headaches.
  • Federal penalties for deletion include fines up to $37,500 per vehicle and potential criminal charges; states can also impose their own penalties during inspection.
  • Once deleted, your engine cannot pass emissions testing, and you lose all factory warranty coverage on the engine and emissions-related components.
  • Deletion is legal only for off-road use—racing, agricultural work, or vehicles that never touch public roads.

What the DPF, SCR, and EGR systems actually do

The diesel particulate filter (DPF) traps soot particles in the exhaust before they leave the tailpipe. When the filter gets full—usually after 300 to 500 miles of driving—the engine triggers a regeneration cycle. During regen, the engine burns extra fuel to heat the exhaust to around 1,000 degrees Fahrenheit, which incinerates the trapped soot. This process is automatic, but it reduces fuel economy by 5 to 10 percent while it's happening, and it puts extra stress on the engine.

The selective catalytic reduction (SCR) system injects a urea-based fluid called diesel exhaust fluid (DEF) into the hot exhaust stream. A chemical reaction between the DEF and nitrogen oxides (NOx) converts those pollutants into harmless nitrogen and water. Your 2018 Cummins has a DEF tank that you refill every 10,000 to 15,000 miles, depending on driving. If the DEF tank runs empty, the engine will derate—it cuts power and limits your speed to force you to refill it.

The exhaust gas recirculation (EGR) cooler takes some of the hot exhaust gas, cools it down, and routes it back into the intake manifold. This lowers combustion temperatures and reduces NOx formation. The cooler itself is a common failure point on Cummins engines; when it fails, coolant can leak into the oil, and the repair costs $1,500 to $2,500.

Why people delete these systems and what they gain

The primary reason owners delete emissions systems is power. A 2018 Cummins 6.7L produces roughly 370 horsepower and 865 pound-feet of torque from the factory. After a full delete and engine tune, that same engine can produce 450 to 500 horsepower and 1,000 to 1,100 pound-feet of torque. That's a 30 to 35 percent increase in power, which translates to faster acceleration, better towing performance, and a noticeably different driving experience.

Fuel economy also improves in certain conditions. Because the engine no longer triggers DPF regeneration cycles, you avoid the 5 to 10 percent fuel economy penalty that comes with regen. On a truck that gets 18 miles per gallon, that's a real difference. However, the improved economy only applies to normal highway and city driving; aggressive driving or heavy towing can still reduce efficiency.

Engine longevity is another factor. The EGR cooler is a known weak point on Cummins engines, and deleting the EGR system eliminates the risk of cooler failure entirely. The DPF also creates backpressure in the exhaust system, which can stress the turbocharger and engine seals over time. Removing that backpressure reduces wear on those components. Some owners report that deleted engines run cooler and cleaner internally because they're not recirculating exhaust gas or accumulating soot.

The legal status of deletion in all 50 states

Deletion is illegal for any vehicle that operates on public roads in the United States. The Clean Air Act prohibits tampering with or removing emissions control equipment from any vehicle manufactured after 1983. The Environmental Protection Agency (EPA) enforces this rule, and the penalties are severe: fines up to $37,500 per vehicle, potential criminal charges for repeat offenders, and liability if your truck causes an accident.

States add their own enforcement layers. During emissions testing—required every one to two years depending on your state—a deleted truck will fail when ready. The test scans your engine computer for the presence of emissions systems. If the DPF, SCR, or EGR monitoring is missing or disabled, the test fails. Some states will not issue a registration renewal until you pass, which means you cannot legally drive the truck.

Deletion is legal only for vehicles that never operate on public roads. That includes off-road racing trucks, agricultural equipment, or vehicles used exclusively on private property. If you delete your truck and then drive it to work, to the store, or anywhere on a public road, you are in violation of federal law. Law enforcement and emissions inspectors have the authority to inspect your vehicle and report violations to the EPA.

Warranty loss and long-term engine risk

Cummins and Dodge will void your engine warranty the moment they discover a delete. The factory warranty on a 2018 Cummins covers defects in materials and workmanship for five years or 100,000 miles, whichever comes first. Once you delete the engine, that coverage ends. If the turbocharger fails, if the fuel injectors go bad, or if the engine develops an internal problem, you pay for the repair out of pocket. On a Cummins engine, major repairs can cost $3,000 to $8,000.

Deletion also changes how the engine behaves under stress. Without the EGR system cooling the intake charge, combustion temperatures rise. Without the DPF backpressure, the turbocharger operates at different boost levels. These changes can accelerate wear on internal components like piston rings, valve seats, and bearing surfaces. Some deleted engines run reliably for 100,000 miles or more; others develop problems much sooner. The outcome depends on how aggressively you drive, how well you maintain the engine, and the quality of the tune applied to your specific truck.

What a delete kit includes and how installation works

A complete 2018 Cummins delete kit typically includes a new exhaust manifold or downpipe that bypasses the DPF, a blanking plate or block-off kit for the EGR cooler, and sometimes a new intake manifold gasket. The kit does not include the SCR system removal—that's handled by the engine tune. Installation requires removing the DPF from the exhaust system, capping off the EGR cooler lines, and installing the new exhaust components. The work takes 8 to 16 hours depending on the shop and the specific kit.

After the hardware is installed, a diesel tuner reprograms the engine computer using specialized software. The tune disables all DPF, SCR, and EGR monitoring codes, removes the DEF tank requirement, and adjusts fuel injection and boost pressure to maximize power output. This is the critical step—without the tune, the engine computer will throw fault codes and trigger limp mode. The tune cost ranges from $400 to $800, and the hardware kit typically costs $1,200 to $2,000, depending on the brand and quality.

Resale value and insurance complications

A deleted truck is harder to sell and worth less than an unmodified one. Buyers who plan to keep the truck on public roads will not touch a deleted engine because of the legal and warranty issues. Buyers who want a deleted truck already know what they're looking for and will negotiate aggressively on price. You can expect to lose $2,000 to $5,000 in resale value compared to an unmodified truck with the same mileage and condition.

Insurance can also become a problem. Some insurers will not cover a deleted truck, or they will exclude emissions-related damage from coverage. If you're involved in an accident and the insurer discovers the deletion during the claims investigation, they may deny coverage or cancel your policy. Always disclose the modification to your insurance company before you delete the truck, and get written confirmation that you're still covered.

Frequently Asked Questions

Can I delete my 2018 Cummins and still pass emissions testing?

No. The emissions test scans your engine computer for DPF, SCR, and EGR monitoring systems. If those systems are disabled or missing, the test fails when ready. There is no way to pass emissions with a deleted engine.

Will a delete kit damage my engine?

Not when ready. A quality delete kit and tune will not cause damage during installation. However, deletion changes combustion temperatures and boost pressure, which can accelerate wear on internal components over time. The long-term reliability depends on the quality of the tune, how hard you drive, and how well you maintain the engine.

What happens if I get caught with a deleted truck?

Federal penalties include fines up to $37,500 and potential criminal charges. Your state may also refuse to renew your registration until you pass emissions testing. If you're caught during a roadside inspection or traffic stop, law enforcement can report the violation to the EPA.

Can I reverse a delete and restore the factory emissions systems?

Reversing a delete is difficult and expensive. You would need to reinstall the DPF, SCR, and EGR systems, replace the engine computer with a factory unit, and have the truck re-tuned to factory specifications. The cost typically exceeds $3,000 to $4,000, and some shops will not perform the work because of the liability involved.

Is deletion worth it for off-road use only?

If you own a dedicated off-road or racing truck that never touches public roads, deletion can provide real benefits: more power, better reliability, and lower maintenance costs. Keep detailed records showing the truck's off-road use only, and be prepared to defend that use if questioned. For any truck that operates on public roads, the legal and financial risks outweigh the performance gains.