A delete kit removes emissions control systems from your 2019 Duramax L5P diesel engine
A delete kit for the 2019 L5P (the 6.6-litre Duramax diesel in Chevrolet Silverado HD and GMC Sierra HD trucks) removes or bypasses three emissions systems: the diesel particulate filter (DPF), the selective catalytic reduction (SCR) system, and the exhaust gas recirculation (EGR) cooler. The kit replaces factory exhaust piping and reprograms the engine computer to stop monitoring these systems.
Owners install delete kits for fuel economy gains, lower exhaust temperatures, and to avoid the cost of replacing a failed DPF or SCR component. A clogged or faulty DPF can cost $2,000 to $4,000 to replace; an SCR failure runs similar money. Delete kits eliminate those parts entirely, which appeals to owners who tow heavy loads or rack up high mileage.
The trade-off is significant: deleting emissions systems is illegal for on-road use in all 50 states under the Clean Air Act. The EPA can fine vehicle owners up to $37,500 per vehicle for tampering with emissions equipment. Many states also fail deleted trucks during inspection. Diesel shops that sell and install delete kits operate in a legal grey area; some openly advertise the service, while others do not.
Key Takeaways
- A delete kit removes the DPF, SCR, and EGR systems and reprograms the engine computer to stop monitoring them.
- Owners choose delete kits to gain 3 to 7 miles per gallon, lower engine temperatures, and avoid $2,000 to $4,000 DPF replacement costs.
- Deleting emissions systems is illegal for street-driven vehicles under federal law and can result in EPA fines up to $37,500.
- A deleted truck will fail emissions inspection in most states and cannot be registered or titled legally.
- Delete kits are permanent modifications that require engine computer reprogramming and custom exhaust fabrication.
How the L5P emissions systems work and why they fail
The 2019 L5P has three emissions devices working together. The diesel particulate filter (DPF) traps soot particles in the exhaust. When the filter loads with soot, the engine heats the exhaust to burn it off—a process called regeneration. This happens automatically during highway driving, but if you tow heavy or idle a lot, regeneration cannot keep up and the filter clogs.
The selective catalytic reduction (SCR) system injects diesel exhaust fluid (DEF) into the exhaust stream to convert nitrogen oxides into harmless nitrogen and water. The SCR catalyst can fail from DEF contamination or thermal stress. When it fails, the truck enters limp mode and will not run at full power.
The EGR cooler recirculates a portion of exhaust gas back into the intake to lower combustion temperatures and reduce emissions. The cooler is prone to internal corrosion and leaks, which can allow coolant into the oil. A failed EGR cooler can damage the engine if not caught early.
All three systems add cost and complexity. A DPF regeneration cycle can drop fuel economy by 1 to 2 miles per gallon while it runs. An SCR failure leaves you stranded or limping to a dealer. An EGR cooler leak means an engine overhaul. For owners who tow or drive in stop-and-go traffic, these failures are common enough that delete kits become financially tempting.
What a delete kit physically includes and how installation works
A complete L5P delete kit contains a custom exhaust pipe that bypasses the DPF and SCR, a blanking plate or block-off kit for the EGR cooler, and a tuning file (engine computer reprogramming) that disables all emissions monitoring. Some kits also include a new fuel rail or fuel pressure regulator because the SCR system uses a separate fuel injector.
Installation requires removing the factory exhaust from the turbo back, unbolting the DPF and SCR canisters, and welding or bolting in the replacement pipe. The EGR cooler is either left in place with a blanking plate installed upstream, or removed entirely. A diesel tuner then connects to the engine computer via the OBD-II port and loads the delete tune, which erases all DPF, SCR, and EGR fault codes and disables regeneration logic.
The job takes 8 to 12 hours at a shop and costs between $1,200 and $2,500 depending on whether you supply the kit or the shop does. Some owners buy the kit online and have a local shop install it; others have the shop source and install everything. Once deleted, the truck will not regenerate the DPF (because there is no DPF), will not inject DEF (because the SCR is gone), and will not trigger emissions-related check engine lights.
Real fuel economy and performance gains from a delete
Owners report fuel economy improvements of 3 to 7 miles per gallon after a delete, depending on driving style and load. The gains come from two sources: the engine no longer performs DPF regeneration cycles, which consume fuel and reduce power, and the delete tune typically increases fuel injection pressure and timing to extract more energy from each gallon. Towing trucks see the biggest gains because they spend more time in regeneration mode on the factory tune.
Exhaust gas temperatures drop by 100 to 200 degrees Fahrenheit because the DPF and SCR are no longer in the exhaust stream. Lower temperatures reduce thermal stress on the turbo and exhaust manifold, which can extend their life. Some owners also report smoother throttle response and less turbo lag because the tune optimizes boost pressure.
These gains are real, but they come at the cost of emissions compliance. A deleted truck produces more nitrogen oxides and particulate matter than a stock truck. The emissions reduction technology your truck was designed with is now gone. This is why the EPA prohibits it—the technology exists to meet air quality standards, and removing it puts the burden of those emissions back into the air.
Legal consequences and registration problems
The Clean Air Act makes it illegal to remove, disable, or bypass any emissions control device on a vehicle intended for road use. The EPA enforces this rule and can issue civil penalties up to $37,500 per vehicle. Individual states can add their own penalties. Some states treat it as a misdemeanor with fines and possible jail time, though prosecution of individual vehicle owners is rare.
The more when ready problem is registration and inspection. Most states require emissions testing for diesel trucks, and a deleted truck will fail because the DPF and SCR are gone. You cannot register or renew the title on a deleted truck in those states. Some owners register deleted trucks in states with no emissions testing, but this is registration fraud if you live in a state that requires testing.
If you are caught driving a deleted truck during a roadside inspection or at a weigh station, the officer can issue a citation. Diesel trucks are common targets for emissions inspections because the modifications are visible (no DPF canister under the truck) and because commercial operators sometimes delete trucks to save money on fuel and maintenance.
When owners choose a delete kit versus other options
If your DPF is clogged or your SCR has failed, you have three choices: replace the failed component with a factory part, install a new aftermarket DPF or SCR, or delete the system. A factory DPF replacement costs $2,000 to $4,000 and comes with a warranty. An aftermarket DPF costs $800 to $1,500 but may not last as long. A delete kit costs $1,200 to $2,500 and is permanent.
Owners who tow heavy loads or drive in dusty conditions often choose a delete because they expect the DPF to fail again within a few years. Owners who drive mostly highway miles and maintain their truck well may never need a DPF replacement and choose to keep the factory system. Commercial operators who can absorb the cost of a DPF replacement and need the truck to pass inspection will replace the part rather than delete.
There is also a middle ground: some owners install a DPF delete pipe (which removes the DPF but keeps the SCR and EGR) or a SCR delete tune (which disables the SCR but keeps the DPF). These partial deletes are less common because they still leave you with emissions monitoring and still fail inspection, but they cost less than a full delete and remove one point of failure.
Maintenance and long-term reliability after a delete
A deleted L5P requires less maintenance in some ways and more in others. You no longer need to buy diesel exhaust fluid (DEF), which costs $5 to $10 per gallon and adds up if you tow. You no longer have to worry about DPF clogs or SCR failures. The engine will run cooler and produce less soot, which can extend oil change intervals slightly.
However, a deleted truck produces more soot and nitrogen oxides, which can accelerate wear on the turbo and exhaust manifold over very high mileage. The delete tune increases fuel injection pressure, which puts more stress on the fuel injectors and fuel pump. If you plan to keep the truck past 200,000 miles, these long-term effects are worth considering.
Once deleted, you cannot go back to stock without replacing the DPF, SCR, and EGR cooler and reflashing the factory tune. This is expensive and defeats the purpose of deleting in the first place. Most owners who delete keep the truck deleted for its life or sell it to someone who wants a deleted truck.
Frequently Asked Questions
Will a delete kit make my truck fail a smog test?
Yes. A deleted truck has no DPF or SCR, so it cannot pass an emissions test in any state that requires one. You will not be able to register or renew your title. Some owners register deleted trucks in states with no testing, but this is illegal if you live in a state that requires testing.
How much fuel economy will I actually gain?
Most owners report 3 to 7 miles per gallon improvement, with the biggest gains on trucks that tow or idle frequently. Highway-only trucks see smaller gains. The improvement comes from skipping DPF regeneration cycles and from the tune optimizing fuel injection.
Can I get caught with a deleted truck?
Yes. Diesel trucks are common targets for roadside emissions inspections, especially at weigh stations. An officer can see that the DPF is missing and issue a citation. The EPA can also fine you up to $37,500 if you are caught. Most enforcement is against commercial operators, but individual owners have been cited.
What happens if my deleted truck breaks down and I need warranty work?
Chevrolet and GMC will not cover any engine or emissions-related repairs on a deleted truck. If the turbo fails, the fuel injectors fail, or the engine has any problem, the dealer can refuse warranty service. You will pay out of pocket for all repairs.
Can I delete just the DPF and keep the SCR?
Yes, some shops offer partial deletes that remove the DPF but keep the SCR and EGR. This costs less and removes one point of failure, but the truck still fails emissions testing and is still illegal for road use. A partial delete is uncommon because it does not solve the registration problem.