The 2025 Ford Expedition uses a two-tone paint scheme on its power-operated rear gate
Ford's 2025 Expedition features a split gate design where the upper and lower sections of the power-operated tailgate are painted in different colors. The upper portion matches your vehicle's body color, while the lower section—the part that swings down when you open it—comes in a contrasting darker shade. This is not a defect or paint problem; it is an intentional design choice that Ford uses to visually break up the rear end and make the gate appear lighter and more integrated with the cargo area.
Understanding this design matters because it affects how you maintain the paint, what to expect if you need repairs, and whether aftermarket options exist if you want a different look. The split gate also influences how dirt and road salt accumulate on different sections, since the lower gate spends more time exposed to the elements when open.
Key Takeaways
- The 2025 Expedition's split gate intentionally uses two paint colors—body color on top, darker shade on the lower section—as a design feature, not a manufacturing error.
- Both sections require the same maintenance as the rest of your vehicle's exterior, including regular washing and protection from road salt and UV exposure.
- If you need to repaint either section after damage, a Ford dealership or certified collision shop can match the original colors using Ford's paint codes.
- The lower gate section experiences more weathering because it remains exposed when the gate is open, so inspect it regularly for chips or corrosion.
How the split gate paint scheme affects maintenance
The two-tone paint on the gate means you are actually maintaining two separate painted surfaces, even though they are part of one component. The upper section, which matches your body color, gets the same protection as your hood and doors—it needs regular washing to remove contaminants and occasional waxing to maintain the clear coat. The lower section, painted in the darker shade, requires the same care but may show water spots or dust more visibly depending on the specific color Ford used on your model.
The lower gate section is more vulnerable to damage because it swings open and closes repeatedly, and it sits lower to the ground where it encounters road spray, gravel, and salt. When you wash your Expedition, pay particular attention to the edges where the two paint colors meet—dirt and salt accumulate in these transition areas and can cause corrosion if left unchecked. Dry these areas thoroughly after washing to prevent water from sitting on the paint.
If you live in a region with winter road salt, the lower gate section deserves extra attention. Salt spray reaches this area more readily than it reaches your hood or roof, and the constant opening and closing of the gate can crack the protective clear coat, allowing salt to reach the base paint underneath. A coat of automotive wax every three to four months provides additional protection in harsh climates.
Repainting the split gate after damage
If your gate sustains damage—a dent that requires repainting, a deep scratch, or corrosion—you will need to repaint whichever section was damaged. Ford uses specific paint codes for both the upper body color and the lower gate color on the 2025 Expedition. Your vehicle identification number (VIN) and the paint code label, usually located inside the driver's door jamb, tell a collision shop or dealership exactly which colors to use.
A Ford dealership can order the exact paint and handle the repair, ensuring a perfect match. Independent collision shops that work with Ford vehicles can also access these paint codes and perform the work, often at a lower cost. The key is providing the shop with your VIN and asking them to confirm both paint codes before they begin—this prevents mismatches where the repaired section looks noticeably different from the original.
If only the lower gate section needs repainting, the shop will mask off the upper section to prevent overspray. If both sections are damaged, the entire gate will be repainted as one unit. Expect the repair to take several days because the paint must cure properly before the gate can be operated repeatedly.
Inspecting the gate for paint damage and corrosion
Check your gate's paint condition every few months, especially if you park outdoors or drive in areas with road salt. Look for chips where the paint has flaked away, exposing the metal underneath—these are the most common entry points for corrosion. Run your hand along the edges where the upper and lower sections meet; rough spots or bubbling paint indicate that moisture has gotten under the clear coat and is beginning to rust the base metal.
The lower gate section is particularly prone to chips from gravel kicked up by other vehicles on the highway. Small chips can be touched up with Ford touch-up paint, which you can order using your paint code. Larger areas of damage or visible corrosion require professional repainting to prevent rust from spreading. Do not wait to address corrosion—once it starts, it spreads quickly under the paint and becomes much more expensive to repair.
If you notice the gate is difficult to open or close, or if it makes unusual sounds, the issue is usually mechanical rather than paint-related. However, corrosion around the hinges or latch can eventually affect operation, so addressing paint damage promptly helps prevent mechanical problems down the road.
Protecting the split gate paint long-term
Beyond regular washing and waxing, you can protect the gate's paint by parking in a garage or under cover when possible. This reduces UV exposure, which fades paint over time, and keeps road salt and contaminants off the surface. If you cannot park covered, consider a car cover designed for your vehicle—it protects the entire exterior, including the gate.
Paint protection film (PPF), a clear adhesive layer applied to the paint surface, is another option for high-wear areas. Many owners explore PPF to the lower gate section because it is most vulnerable to chips and scratches. A professional installer applies the film, and it is nearly invisible once cured. PPF is more expensive than wax but lasts several years and can prevent costly repainting.
Ceramic coatings, which create a hard protective layer over the paint, are also available for the entire gate or just the lower section. These last longer than wax and provide better protection against UV and chemical damage, though they cost more upfront and require professional process.
Aftermarket options if you want to change the gate's appearance
If you prefer a single-color gate or want a different look than Ford's split design, you have options. A collision shop or custom painter can repaint the entire gate in a single color—either matching your body color completely or choosing a different shade. This is a cosmetic change and does not affect the gate's function or warranty, though it does mean you are responsible for maintaining the new paint.
Some owners wrap the lower gate section in vinyl to change its appearance without permanent paint changes. A vinyl wrap can be removed later if you want to return to the original look. This approach is less expensive than repainting and allows you to experiment with different colors or finishes.
Before making any changes, consider how they affect resale value. The split gate is Ford's factory design, and many buyers expect to see it. Changing it may make the vehicle less appealing to future owners, though this depends on the specific change and your local market.
Frequently Asked Questions
Is the split gate paint a defect I should report to Ford?
No. The two-tone paint is an intentional design feature, not a manufacturing defect or paint problem. Ford uses this design on the 2025 Expedition to create visual interest and make the rear end appear more balanced. If you have concerns about paint quality—such as peeling, bubbling, or uneven color—those would be warranty issues worth reporting to your dealership.
Can I wash both sections of the gate the same way?
Yes. Both sections use the same paint technology and clear coat, so they require identical washing and protection. Use the same car wash soap, wax, and techniques on both the upper and lower sections. The only difference is that the lower section may need more frequent inspection because it experiences more exposure and wear.
What paint code do I need if I want to touch up a chip?
You need two codes: one for the upper gate section (which matches your body color) and one for the lower section. Both codes are on the label inside your driver's door jamb. Write them down and bring them to a Ford dealership or auto parts store when ordering touch-up paint. Make sure you order the correct code for whichever section you are repairing.
Will the gate's paint fade faster than the rest of my vehicle?
The lower gate section may fade slightly faster because it is lower to the ground and receives more direct UV exposure when open. However, if you wash and wax your entire vehicle regularly, including the gate, fading should be minimal. Parking in shade or using a cover helps prevent fading on all painted surfaces.
Can a regular auto body shop repaint my gate to match the original colors?
Yes, as long as they have access to your paint codes and your VIN. Any certified collision shop or professional painter can match Ford's colors using the official paint codes. Call ahead and confirm they work with Ford vehicles and can access the correct codes before you bring your vehicle in.