A crankcase filter delete removes the factory filtration system that catches oil vapors before they re-enter your engine
The 6.7 Cummins diesel engine (used in Ram 2500 and 3500 trucks from 2007 onward) comes with a crankcase ventilation system that routes blow-by gases through a filter before they cycle back into the intake. A crankcase filter delete bypasses this filter entirely, letting those vapors flow directly back without filtration. The factory filter sits in the valley between the cylinder heads and requires regular replacement — typically every 50,000 to 80,000 miles depending on driving conditions.
Owners delete this system for two practical reasons: cost savings on filter replacements and easier access to the engine bay. The factory filter cartridge costs $40 to $80 per replacement, and labor to remove and reinstall it adds another $100 to $200 at a shop. A delete kit (typically $150 to $400 depending on brand and materials) is a one-time expense that eliminates future filter costs and the maintenance task itself.
Key Takeaways
- A crankcase filter delete removes the factory filtration component and routes blow-by gases directly back into the intake without filtering them.
- The main benefit is eliminating recurring filter replacement costs (roughly $40 to $80 per filter plus labor) and freeing up engine bay space.
- Deleting the filter increases oil vapor and particulate matter entering the intake, which can accumulate on intake valves and require more frequent intake cleaning.
- A delete kit costs $150 to $400 installed and is a permanent modification that voids any remaining factory warranty coverage related to the crankcase system.
- Some owners pair a delete with an external catch can ($200 to $500) to trap vapors before they enter the intake, reducing buildup but adding another component to maintain.
How the factory crankcase filter works
Blow-by is combustion gas that leaks past the piston rings during the power stroke. On the 6.7 Cummins, these gases accumulate in the crankcase and need to exit to prevent pressure buildup that would damage seals and gaskets. The factory system routes this gas through a filter cartridge mounted in the valley, which traps oil mist and particulates before the cleaned gas re-enters the intake manifold.
The filter does its job — it prevents most oil from coating intake valves and the intake tract. However, it is not perfect. Some oil still makes it through, and over time the intake valves accumulate carbon deposits. The filter itself also becomes saturated and requires replacement. On a 6.7 with moderate to heavy use, you will see filter changes every 50,000 to 80,000 miles, though some owners report needing them sooner in dusty or towing conditions.
What happens when you delete the filter
Without the filter, all blow-by gases — including oil vapor and particulates — flow directly into the intake. This is where the trade-off becomes real. You save money on filter replacements, but your intake valves and intake manifold will accumulate carbon deposits faster. The rate depends on driving style, load, and fuel quality, but most owners who delete without a catch can report needing intake cleaning every 80,000 to 120,000 miles instead of every 150,000 to 200,000 miles.
An intake cleaning on a 6.7 Cummins typically costs $400 to $800 at a diesel shop, depending on whether the work is done in-frame or requires removing the head. Over the life of the truck, you may end up spending more on extra cleanings than you saved on filter replacements. The decision hinges on whether you value the simplicity and when ready cost savings more than the long-term maintenance burden.
Pairing a delete with a catch can
Many owners who delete the factory filter install an external catch can — a small tank that traps oil vapor before it enters the intake. A catch can costs $200 to $500 installed and requires periodic draining (every 5,000 to 10,000 miles depending on the can size and driving conditions). This approach splits the difference: you eliminate the factory filter and its replacement costs, but you still prevent most oil from reaching the intake valves.
A catch can is not a perfect solution. It requires regular maintenance, and if you forget to drain it, pressure can build and the can can rupture or overflow. Some owners find the maintenance burden comparable to replacing the factory filter. However, if you are already comfortable checking and draining fluids regularly, a catch can is a practical middle ground that reduces intake cleaning frequency to something closer to stock intervals.
Warranty and long-term engine health
A crankcase filter delete is a permanent modification that will void any remaining factory warranty coverage related to the crankcase ventilation system. If your truck is still under the original Cummins powertrain warranty (typically five years or 100,000 miles), a delete performed before that coverage expires could complicate warranty claims if a crankcase-related failure occurs. Check your warranty documents and contact your dealer before proceeding if coverage is still active.
Long-term engine health depends on how aggressively you drive and whether you pair the delete with a catch can. A 6.7 Cummins is a robust engine, and many owners run deleted systems for 200,000 miles or more without major issues. However, accelerated intake valve carbon buildup is real and documented. If you tow heavy loads regularly or drive in dusty conditions, the extra intake cleaning costs may outweigh the savings from skipping filter replacements.
Installation and kit options
A crankcase filter delete kit typically includes new hoses, fittings, and a mounting bracket to reroute the crankcase vent line directly to the intake manifold or intake tube. Popular brands include ARP, Fleece Performance, and Sinister Diesel. Installation takes 1 to 2 hours at a diesel shop and costs $200 to $400 in labor, or you can do it yourself if you are comfortable working in the engine bay. The job requires basic hand tools and does not require removing major components.
Before ordering a kit, verify it is designed for your specific year and engine configuration. The 6.7 Cummins was updated in 2013 with a different crankcase vent design, so a kit for a 2007–2012 truck will not fit a 2013 or later model. Check the kit manufacturer's compatibility list and read owner reviews on diesel forums to see how the kit performs in real-world use and whether it plays well with other modifications you may have planned.
Frequently Asked Questions
Will a crankcase filter delete hurt my fuel economy?
No measurable difference in fuel economy has been documented from a delete alone. The change in air flow through the intake is minimal. However, if a delete causes intake valve carbon buildup that goes uncleaned for a long time, rough idle or slight power loss could develop, which might indirectly affect economy. Regular intake cleaning prevents this.
Can I reinstall the factory filter after a delete?
Technically yes, but it is not straightforward. The delete kit removes or blocks the original filter mounting location, and reinstalling the factory system requires sourcing the original components and reversing the plumbing. Most owners treat a delete as permanent. If you think you might want the option to go back, consider a catch can instead.
Do I need to tune my truck after a crankcase filter delete?
No. A delete does not change fuel injection, boost pressure, or combustion, so it does not require a tune. If you are adding a catch can, no tune is needed for that either. A tune is only necessary if you are modifying fuel delivery, turbo boost, or other engine parameters.
How often should I clean my intake valves if I delete the filter?
Most owners report needing intake cleaning every 80,000 to 120,000 miles with a delete and no catch can. With a catch can, you can often stretch that to 120,000 to 150,000 miles. The exact interval depends on your driving style, load, and fuel quality. Monitor for rough idle or loss of power as signs that cleaning is due.
What is the difference between a crankcase filter delete and a PCV delete?
They are different systems. The crankcase filter handles blow-by vapors. The PCV (positive crankcase ventilation) valve regulates crankcase pressure. Some owners delete both, but deleting the PCV valve is more controversial and can cause pressure issues if not done carefully. A crankcase filter delete alone is straightforward and does not affect the PCV system.