A turbo upgrade on a 6.7 Cummins adds boost pressure and airflow to increase horsepower and torque, but the real gains depend on whether you upgrade the turbo alone or pair it with supporting modifications
The 6.7 Cummins diesel engine comes from the factory with a single Holset turbocharger designed for stock power levels—around 370 horsepower and 850 pound-feet of torque in most Dodge Ram applications. A turbo upgrade replaces that stock unit with an aftermarket turbo that spins faster, compresses more air, and delivers higher boost pressure into the cylinders. The result is more fuel burned per cycle, which means more power.
But here is the catch: a turbo by itself does not automatically translate to usable power gains. A larger or higher-flowing turbo needs fuel, air, and exhaust flow to match. Without those supporting systems, you get a turbo that spins hard but does not deliver the power increase you paid for. Most owners who see real results pair a turbo upgrade with a tuning change, intake modifications, and sometimes exhaust work.
Key Takeaways
- A turbo upgrade alone typically adds 50 to 100 horsepower on a stock 6.7 Cummins, but that number climbs to 150 to 250 horsepower when paired with a tuning tune and supporting modifications.
- Aftermarket turbos for the 6.7 Cummins range from $1,500 to $4,000 depending on the brand and whether you choose a drop-in replacement or a larger frame size.
- Installation labor usually runs $800 to $1,500 at a diesel shop, and you will need to factor in the cost of a tuning tune, which adds another $400 to $800.
- A turbo upgrade stresses the transmission and fuel system, so many owners upgrade the fuel injectors and transmission cooler at the same time to avoid reliability problems.
- Warranty coverage on your engine and truck is typically voided once you install an aftermarket turbo and tune, so confirm your insurance coverage before proceeding.
Stock versus aftermarket turbo performance on the 6.7 Cummins
The factory Holset turbo on a 6.7 Cummins is built for durability and emissions compliance, not peak power. It reaches about 18 to 20 pounds per square inch (psi) of boost at full throttle and flows enough air to support the stock fuel map. Aftermarket turbos designed for the 6.7 typically operate at 22 to 28 psi or higher, depending on the model and tune.
Common aftermarket options include the Holset HE351VE (a larger version of the stock turbo), the Garrett GTX3576R, and the BorgWarner S400. Each has different spool characteristics—how quickly it builds boost—and different maximum flow rates. A Holset HE351VE upgrade is considered a "bolt-on" because it uses the same mounting points as the stock turbo, making installation simpler. Larger frame turbos like the Garrett or BorgWarner require custom exhaust manifold work and cost more to install.
Real horsepower and torque gains with different upgrade paths
If you install only a turbo upgrade with no other changes, expect 50 to 100 additional horsepower and 100 to 150 additional pound-feet of torque. That is a noticeable improvement, but the turbo is not working at its full potential because the stock fuel system and engine tune are not pushing enough fuel into the cylinders to take advantage of the extra air.
Add a tuning tune—a custom engine map that increases fuel injection timing and quantity—and the same turbo now supports 150 to 250 additional horsepower and 250 to 400 additional pound-feet of torque, depending on the tune's aggressiveness and whether you have upgraded the fuel injectors. Some owners push even further with larger injectors, upgraded fuel pumps, and exhaust modifications, reaching 400+ horsepower gains, but those builds require careful attention to engine durability and cooling.
The jump from turbo-only to turbo-plus-tune is where most owners see the real value. The turbo hardware alone is not the limiting factor; the tune is what unlocks the turbo's capability.
Turbo upgrade costs and installation labor
Aftermarket turbo prices vary by brand and design. A Holset HE351VE upgrade turbo costs between $1,500 and $2,200 new, depending on the supplier. Larger frame turbos like the Garrett GTX3576R or BorgWarner S400 run $2,500 to $4,000. Used turbos are available for $800 to $1,500 but carry unknown history and may need internal seals or bearings replaced.
Installation labor at a diesel shop typically runs $800 to $1,500 for a bolt-on turbo like the HE351VE, because the work involves removing the intake and exhaust manifolds, unbolting the stock turbo, and installing the new one. Larger frame turbos that require custom exhaust manifold fabrication can cost $1,500 to $2,500 in labor alone.
A tuning tune adds $400 to $800 depending on whether you choose a pre-made map or a custom tune built for your specific truck and modifications. Many owners also upgrade fuel injectors ($600 to $1,200) and install a transmission cooler ($300 to $600) at the same time to protect the rest of the drivetrain from the added power.
Supporting modifications that protect reliability
A turbo upgrade and tune increase cylinder pressure and exhaust temperature, which stresses components downstream. The transmission fluid heats up faster because the engine is producing more torque, and the fuel system works harder to deliver the extra fuel the tune demands.
Most diesel shops recommend upgrading the transmission cooler as a baseline protection—it is inexpensive and prevents transmission fluid from overheating during towing or sustained power use. Fuel injectors are the next common upgrade; stock injectors on a 6.7 Cummins are rated for about 100 horsepower above stock, so a 150+ horsepower tune will push them past their design limit. Upgraded injectors rated for 200+ horsepower gains cost $600 to $1,200 and are often installed at the same time as the turbo.
Some owners also upgrade the fuel pump, intake manifold gaskets, or exhaust manifold gaskets to prevent boost leaks. These are smaller expenses ($100 to $400 each) but catch problems before they become expensive failures.
Warranty and insurance implications of a turbo upgrade
Installing an aftermarket turbo and tune will void any remaining factory warranty on your engine and transmission. Dodge and Cummins will not cover engine damage, turbo failure, or transmission issues once they detect a non-stock tune or turbo. If your truck is still under warranty, confirm the cost of losing that coverage before you proceed.
Insurance coverage is less clear-cut. Most standard auto insurance policies do not explicitly exclude modified vehicles, but some insurers will deny a claim if they determine that the modification contributed to the damage. Contact your insurance agent before the upgrade and ask whether your policy covers engine modifications and custom tunes. Some owners find that their rates increase slightly or that they need to switch to a specialty insurer that covers modified trucks.
Frequently Asked Questions
Will a turbo upgrade hurt my fuel economy?
Yes, noticeably. A stock 6.7 Cummins gets roughly 18 to 22 miles per gallon on the highway depending on driving style. A turbo upgrade with a tune typically reduces that to 14 to 18 mpg because the tune increases fuel injection to support the higher boost pressure. If you drive mostly highway miles, the fuel cost increase can offset some of the performance benefit.
Can I install a turbo upgrade myself, or do I need a shop?
Turbo removal and installation is possible for someone with diesel engine experience and the right tools, but most owners take it to a shop. The work requires removing the intake and exhaust manifolds, which means breaking seized bolts and dealing with tight spaces. A shop also has the equipment to check for boost leaks and tune the engine properly after installation.
How long does a turbo upgrade last?
An aftermarket turbo on a 6.7 Cummins typically lasts 150,000 to 200,000 miles with proper maintenance, assuming the supporting modifications are in place and the tune is not excessively aggressive. Turbo failure is usually caused by oil starvation, boost leaks, or running a tune that exceeds the turbo's flow capacity. Regular oil changes and monitoring boost pressure help extend turbo life.
What is the difference between a bolt-on turbo and a larger frame turbo?
A bolt-on turbo like the Holset HE351VE uses the same mounting points as the stock turbo, so installation is straightforward. A larger frame turbo like the Garrett GTX3576R requires a custom exhaust manifold because the mounting flange is different. Larger frame turbos spool slower but flow more air at high rpm, making them better for heavy towing. Bolt-on turbos spool faster and are simpler to install.
Do I need to upgrade my fuel injectors at the same time as the turbo?
Not when ready, but you will need them if you run a tune above 100 horsepower gains. Stock injectors can handle a mild tune with a turbo upgrade, but anything more aggressive will push them past their limit and cause rough idle, black smoke, or injector failure. Most owners upgrade injectors when they upgrade the turbo to avoid a second round of work later.