A turbo upgrade kit replaces or modifies your 6.7 Cummins turbocharger to increase boost pressure, airflow, and engine output
The 6.7 Cummins diesel engine comes from the factory with a turbocharger sized to meet emissions standards and fuel economy targets, not maximum performance. A turbo upgrade kit swaps that factory turbo for a larger or higher-flowing unit, or adds internal modifications like upgraded turbine wheels and compressor housings. The result is higher boost pressure—the amount of compressed air forced into the cylinders—which means more fuel can burn in each cycle, producing more horsepower and torque.
This matters because the factory 6.7 Cummins produces around 370 horsepower and 865 pound-feet of torque. A turbo upgrade can push that to 450–550 horsepower and 1,000–1,200 pound-feet of torque, depending on the kit and what other modifications you've made. That extra power comes with real trade-offs: higher engine temperatures, more stress on internal components, reduced engine life if you don't maintain it properly, and potential warranty loss.
Key Takeaways
- A turbo upgrade increases boost pressure by replacing the factory turbocharger with a larger unit or modifying internal components, raising horsepower and torque output significantly.
- Upgraded turbos run hotter and put more stress on the engine, so you will need upgraded cooling systems, fuel systems, and regular maintenance to prevent damage.
- Most turbo kits require supporting modifications—tuning, intercooler upgrades, fuel injector changes—to work safely and reach their rated output.
- Installing a turbo upgrade will void your factory warranty and may affect your truck's ability to pass emissions testing depending on your state and how the kit is tuned.
- A turbo upgrade is not a repair—it is a performance modification that changes how your engine operates and requires you to understand the long-term maintenance burden.
How a turbo upgrade changes engine operation
Your factory turbocharger is a turbine driven by exhaust gases. As exhaust leaves the cylinders, it spins the turbine, which drives a compressor wheel on the same shaft. That compressor sucks in outside air, compresses it, and forces it back into the engine at higher pressure. More air means more oxygen available to burn fuel, which means more power per combustion cycle.
The factory turbo is calibrated to produce a specific amount of boost—typically 16–18 pounds per square inch (psi) on the 6.7 Cummins—at a certain engine speed. An upgrade kit uses a larger compressor wheel, a different turbine design, or both, to produce 20–28 psi or higher. Some kits use a completely different turbocharger housing; others modify the internals of a similar-sized unit. Either way, the engine now receives more compressed air than it was designed to handle at the factory.
This is where supporting modifications become critical. Your fuel injectors must spray more fuel to match the extra air. Your engine control module (ECM) must be reprogrammed—or tuned—to adjust fuel timing, boost targets, and other parameters. Your cooling system must handle the higher heat. Your transmission may need recalibration to handle the extra torque. Skip any of these, and you risk overheating, detonation (uncontrolled fuel ignition), or mechanical failure.
Common turbo upgrade kits for the 6.7 Cummins
Several manufacturers make turbo kits for the 6.7 Cummins. Fleece Performance offers the Cheetah turbo, which is a modified factory-style turbo with upgraded internals, and the Compound Turbo Kit, which stacks two turbos for extreme boost. Calibrated Power Solutions (CPS) makes the CP3 Turbo and the Dual Turbo Kit. Industrial Injection produces the Duramax-style turbo conversions. Wicked Diesel offers bolt-on kits with upgraded turbos and supporting components.
Kits vary in price from around $2,500 for a modified single turbo to $6,000–$10,000 for a dual-turbo setup, not including installation labor or supporting modifications. A full installation with tuning, fuel system upgrades, and cooling system work can easily run $4,000–$8,000 in labor and parts on top of the kit itself. The choice depends on your budget, your truck's intended use (towing, racing, daily driving), and how much power you want.
Before buying any kit, verify that it is designed for your specific model year. The 6.7 Cummins was produced from 2007 to present, and turbo mounting points, exhaust configurations, and engine bay space vary. A kit for a 2012 may not fit a 2020 without modification.
Supporting modifications you will need
A turbo upgrade does not work in isolation. The engine is a system, and changing one part forces changes elsewhere. Most turbo kits require at least three supporting upgrades: ECM tuning, fuel system work, and cooling system upgrades.
ECM tuning reprograms your engine's computer to adjust fuel injection timing, quantity, and duration; boost pressure targets; exhaust gas recirculation (EGR) settings; and other parameters. Without tuning, the engine will not produce the full power the turbo is capable of, and it may run dangerously lean (too little fuel) or hot. Tuning costs $400–$800 and is usually done by the shop that installs the turbo.
Fuel system upgrades include larger fuel injectors (to spray more fuel) and sometimes a higher-flow fuel pump or upgraded fuel lines. Factory injectors on the 6.7 Cummins are rated for around 370 horsepower. A turbo upgrade typically requires 100–150 horsepower injectors, which cost $600–$1,200 installed. If you skip this, the engine runs out of fuel and cannot reach the turbo's potential output.
Cooling system upgrades include a larger or higher-efficiency intercooler (which cools compressed air before it enters the engine), upgraded radiator, and sometimes an auxiliary transmission cooler. Turbo boost generates heat, and the factory cooling system was not designed to handle it. Cooling upgrades run $800–$2,000 depending on what you choose. Without them, coolant temperatures climb, the engine derates (reduces power automatically to protect itself), and long-term reliability suffers.
Real consequences: warranty, emissions, and engine life
Installing a turbo upgrade voids your factory powertrain warranty when ready. Dodge and Cummins will not cover engine, transmission, or turbo repairs once you have modified the turbocharger or tuned the ECM. If the engine fails at 80,000 miles, you pay for the rebuild or replacement out of pocket—a cost that can exceed $10,000.
Emissions testing is another consideration. Many states require diesel trucks to pass an emissions inspection every one or two years. A turbo upgrade with aggressive tuning can increase nitrogen oxides (NOx) and particulate matter (PM) beyond legal limits, causing your truck to fail inspection. Some shops offer "emissions-compliant" tunes that balance power and emissions, but these produce less output than full-power tunes. Check your state's requirements before committing to a kit.
Engine life is harder to predict. A well-maintained turbo upgrade on a truck used for moderate towing or daily driving may last 150,000–200,000 miles without major issues. A truck that is driven hard, towed at maximum capacity, or not maintained closely may see turbo or engine failure at 80,000–120,000 miles. The upgraded components run hotter and under higher stress, so they wear faster. You will need to change oil more frequently (every 3,000–5,000 miles instead of 7,500–10,000), monitor boost pressure and coolant temperature closely, and address any warning signs when ready.
When a turbo upgrade makes sense
A turbo upgrade is worth considering if you tow regularly and want better power without upgrading to a larger truck, or if you use your truck for racing or performance events where the extra output justifies the cost and maintenance burden. It makes less sense if you drive mostly on highways, rarely tow, or plan to keep the truck for only a few more years. The upfront cost and long-term maintenance requirements are substantial, and you will not recover that investment when you sell the truck.
If your goal is reliability and low maintenance, stick with the factory turbo. If your goal is maximum power and you are willing to accept higher maintenance costs, shorter intervals between service, and the risk of expensive repairs, a turbo upgrade can deliver. Be honest about which category you fall into before you commit.
Installation and what to expect
Turbo installation typically takes 8–16 hours of labor, depending on the kit and your truck's configuration. The shop will remove the factory turbo, install the new one, route new exhaust piping if needed, upgrade fuel injectors and cooling components, reprogram the ECM, and test the truck on a dynamometer to verify output and check for problems.
After installation, you should expect a break-in period of 50–100 miles where you avoid full throttle and high boost to allow new components to seat properly. Monitor your gauges closely during this time. After break-in, have the shop perform a final dyno test to confirm the truck is producing the promised output and running safely.
Frequently Asked Questions
Will a turbo upgrade hurt my truck's fuel economy?
Yes. A turbo upgrade typically reduces fuel economy by 1–3 miles per gallon because the engine is tuned for power, not efficiency, and you will likely drive more aggressively with the extra power available. If fuel economy is important to you, this is a significant trade-off to consider.
Can I install a turbo upgrade myself?
Not unless you have diesel engine experience and proper tools. Turbo installation requires removing and reinstalling exhaust components, fuel lines, and cooling hoses, and ECM tuning requires specialized software and a dynamometer to verify the work. A mistake can damage the engine or create a safety hazard. Use a shop experienced with 6.7 Cummins modifications.
What is the difference between a single turbo and dual turbo upgrade?
A single turbo upgrade replaces the factory turbo with one larger unit, producing moderate power gains (50–100 horsepower). A dual turbo kit uses two turbos in series or parallel, producing larger gains (150–250 horsepower). Dual setups cost more, require more supporting modifications, and generate more heat and stress on the engine.
Do I need to upgrade my transmission with a turbo kit?
The factory 6.7 Cummins transmission (Aisin or Allison, depending on year) can handle moderate turbo upgrades if the ECM is tuned conservatively. Aggressive tunes or dual-turbo setups may require transmission recalibration or internal upgrades to prevent slipping or failure. Ask your shop whether transmission work is needed for your specific kit.
How often should I service my truck after a turbo upgrade?
Oil changes should be performed every 3,000–5,000 miles instead of the factory interval. You should also inspect the turbo, intercooler, and cooling system regularly for leaks or damage, and monitor boost pressure and coolant temperature with a gauge or scan tool. More frequent service means higher maintenance costs over the life of the truck.