An A&P license certifies that a mechanic has the training and knowledge to work on aircraft

An A&P license stands for Airframe and Powerplant license. It is issued by the Federal Aviation Administration (FAA) and allows a person to perform maintenance, repairs, and inspections on aircraft. This is not a general mechanic's license — it is specific to aviation work and is required by federal law for anyone who wants to legally maintain or repair planes for compensation.

The license comes in two parts: the Airframe (A) rating covers the aircraft structure, systems, and components, while the Powerplant (P) rating covers engines and engine systems. Many mechanics pursue both ratings at the same time, which is why you often see them referred to together as "A&P." Some people get only one rating, depending on their career goals.

If you work on cars, trucks, or other ground vehicles, you do not need an A&P license. This license applies only to people who work on aircraft in a professional capacity — whether for airlines, repair shops, manufacturers, or the military.

Key Takeaways

  • An A&P license is a federal certification from the FAA that allows you to legally perform aircraft maintenance and repairs for pay.
  • You must complete either 1,900 hours of hands-on aircraft maintenance work or attend an FAA-approved school, then pass written, oral, and practical exams.
  • The written exam covers airframe systems, powerplant systems, and general aircraft maintenance knowledge, and you must score at least 70 percent.
  • After you pass all three exams, the FAA issues your certificate, which does not expire but can be revoked if you violate maintenance regulations.
  • Many people complete A&P training through community colleges or specialized aviation schools in 18 to 24 months, rather than accumulating hours on the job.

Two paths to meet the FAA's experience requirement

Before you can sit for the A&P exams, you must show the FAA that you have the necessary knowledge and experience. There are two main routes: the work experience path and the school path.

The work experience path requires 1,900 hours of hands-on maintenance work on aircraft. This work must be documented and signed off by a supervisor or mechanic already holding an A&P license. You can accumulate these hours while working at an airline, maintenance facility, or repair shop. This path typically takes several years because you are working and learning at the same time, and not all jobs count equally — some types of work count for full credit, while others count for partial credit toward the 1,900-hour requirement.

The school path is faster. If you attend an FAA-approved aviation maintenance technician school, you can complete the required training in 18 to 24 months. The school provides both classroom instruction and hands-on lab work. After you graduate, you do not need to log 1,900 hours — the school's accreditation satisfies the experience requirement. You can then move directly to the exam stage.

Some people combine both paths: they attend a school for part of their training, then work on the job to finish accumulating hours. The FAA allows this as long as your total experience meets their standards.

The three-part exam process

Once you meet the experience requirement, you must pass three separate exams: a written exam, an oral exam, and a practical exam. All three are administered by the FAA or an FAA-designated examiner called a Designated Pilot Examiner (DPE) or Designated Mechanic Examiner (DME).

The written exam tests your knowledge of airframe systems, powerplant systems, general aircraft maintenance, and regulations. You must score at least 70 percent to pass. The exam is computer-based and covers topics like hydraulics, electrical systems, engines, fuel systems, and FAA rules. Most people study using FAA test guides and practice exams before sitting for this test.

The oral exam is a one-on-one conversation with an examiner who asks you questions about aircraft systems, maintenance procedures, and safety. The examiner is checking that you understand not just the facts but the reasoning behind maintenance practices. This exam typically lasts one to two hours and covers both airframe and powerplant topics if you are pursuing both ratings.

The practical exam, often called the "oral and practical" or "O&P," requires you to demonstrate hands-on skills. You may be asked to identify components, perform maintenance tasks, troubleshoot problems, or explain how you would repair a specific system. The examiner watches you work and asks questions to confirm you know what you are doing and why.

What happens after you pass all three exams

Once you pass the written, oral, and practical exams, the FAA issues your A&P certificate. This certificate does not have an expiration date — it is valid for life, as long as you follow the rules. You can use it to work on aircraft anywhere in the United States and in many other countries that recognize FAA certification.

However, your certificate can be suspended or revoked if you violate FAA maintenance regulations or if you perform work that falls below the standards set by the FAA. The FAA takes maintenance safety seriously because aircraft failures can be catastrophic. If you make a serious mistake or repeatedly cut corners, the FAA can take action against your certificate.

Many employers require A&P mechanics to maintain additional certifications or training in specific aircraft types or systems. Airlines, for example, may require type-rating training on the specific planes they operate. These additional certifications are separate from your A&P license but often required to work on that employer's aircraft.

Where to find FAA-approved schools and training programs

If you decide to pursue A&P training through a school rather than on-the-job experience, you can find FAA-approved programs through the FAA's official website. The FAA maintains a list of all approved aviation maintenance technician schools. These schools range from community colleges to private aviation training centers.

When choosing a school, look for programs that are accredited by the FAA, have instructors with real-world aircraft maintenance experience, and offer both classroom and hands-on lab training. Some schools specialize in specific aircraft types or systems, while others provide general A&P training. Tuition and program length vary, so it is worth comparing several options.

Many schools also offer evening or part-time programs if you are working while you study. Some employers, particularly airlines and military branches, have their own training programs and may sponsor employees through A&P training in exchange for a commitment to work for them after certification.

The difference between an A&P license and other aviation certifications

An A&P license is different from a pilot's license, an aircraft dispatcher certificate, or an aviation safety inspector credential. A pilot's license allows you to fly an aircraft. An A&P license allows you to maintain and repair one. You can hold both licenses, but they are separate certifications with different requirements and exams.

An aircraft dispatcher certificate is for people who plan flight routes and manage flight operations — not maintenance. An aviation safety inspector works for the FAA and oversees compliance with maintenance regulations. None of these roles require an A&P license, though some people pursue multiple certifications throughout their aviation career.

Within the A&P field, there are also specialized certifications like inspection authorization (IA), which allows you to sign off on certain aircraft inspections. To get an IA, you must first hold an A&P license and have at least three years of experience as an A&P mechanic.

Frequently Asked Questions

Do I need an A&P license to work on my own aircraft?

No. The FAA allows aircraft owners to perform maintenance on their own planes without an A&P license. However, if you are paid to work on someone else's aircraft, you must have an A&P license. The rule is about compensation, not about the work itself.

How much does A&P training cost?

Tuition at FAA-approved schools ranges widely depending on the program and location. Community college programs may cost less than private aviation schools. Some employers sponsor training for employees. You should contact schools directly for current pricing and financial aid options.

Can I get an A&P license if I have no prior aircraft experience?

Yes. You do not need prior experience to start A&P training at an FAA-approved school. The school teaches you from the ground up. If you choose the work experience path instead, you would need to find a job in aircraft maintenance first, which may be harder without any background.

How long does it take to get an A&P license?

Through an FAA-approved school, typically 18 to 24 months. Through the work experience path, it usually takes three to five years to accumulate 1,900 hours while working. The exam process itself takes a few weeks to a few months from start to finish.

Can I work on aircraft while I am working toward my A&P license?

Yes, if you are working under the supervision of someone who already holds an A&P license. Your supervisor must sign off on your work hours. This is how many people combine school and work experience to meet the FAA's requirements.