What happens to your airbags after they deploy

When your airbags fire during a crash, they inflate in milliseconds and then deflate completely. The bag itself can be reused, but the airbag control module—the computer that triggered the deployment—records that an event happened and locks into a state that prevents the system from working again until it is reset. Your airbags will not deploy a second time, even if you are in another crash, until that module is cleared and the system is brought back online.

This is a safety feature. The airbag system needs to know whether it has already fired so it does not attempt to deploy a bag that is already deflated or damaged. Once the module detects a crash, it essentially puts the system into a safe, non-functional state until a technician tells it the deployment is complete and the system has been inspected.

An airbag reset is not something you can do yourself with a scanner or by disconnecting the battery. It requires a technician with the correct diagnostic equipment to communicate with the airbag module, confirm that the bags and sensors are intact or have been replaced, and then clear the fault code that is preventing the system from arming again.

Key Takeaways

  • After airbags deploy, the control module locks the system to prevent accidental re-deployment, and only a technician can unlock it.
  • A reset involves scanning the module, inspecting or replacing damaged components, and clearing the deployment code from the computer.
  • Disconnecting the battery or using a basic code reader will not reset the airbag system and may damage other vehicle systems.
  • The cost of an airbag reset depends on whether bags or sensors need replacement, ranging from diagnostic fees alone to thousands of dollars if hardware is damaged.
  • Driving with a locked-out airbag system is legal but unsafe—you lose protection in a future crash until the system is restored.

Why you cannot reset airbags yourself

The airbag system is hardwired into your vehicle's safety architecture. The control module communicates with the engine control computer, the anti-lock brake system, and the seat belt pretensioners. Resetting the airbag module requires a scan tool that can speak the correct diagnostic language for your specific vehicle—usually a proprietary protocol that varies by manufacturer.

A basic code reader from an auto parts store cannot access the airbag module. Even if it could, clearing the code without physically inspecting the bags, sensors, and wiring would leave you with a system that appears to work but may not deploy in a real crash. The module needs confirmation that the hardware is safe before it will arm again.

Disconnecting the battery to try to reset the system will not work and can cause problems elsewhere. Modern vehicles store codes in permanent memory, and disconnecting power can corrupt settings in your transmission, engine, or infotainment system that take time to relearn.

What a technician does during an airbag reset

A technician begins by connecting a diagnostic scanner to your vehicle's OBD-II port (the diagnostic connector under the steering column). The scanner reads the airbag module to determine which bags deployed, what sensor data triggered the deployment, and whether any secondary faults are present—such as a damaged sensor or broken wiring.

Next, the technician physically inspects the airbag components. They look for tears or burns in the bag fabric, check that the steering wheel or dashboard trim is not cracked in a way that would prevent a new bag from deploying properly, and test the sensors with a multimeter to confirm they are still functioning. If any component is damaged, it must be replaced before the system can be reset.

Once all hardware is confirmed safe or replaced, the technician uses the diagnostic scanner to clear the deployment code from the airbag module. This tells the module that the event has been addressed and the system is ready to arm. The scanner then runs a self-test to confirm the module can communicate with all sensors and that the system is ready to protect you in a future crash.

When you need a full airbag replacement versus a reset

Not every crash that deploys airbags requires replacement of the bags themselves. Modern airbags are designed to be reused if they deployed cleanly and the fabric shows no damage. A technician will inspect the bag during the reset process and tell you whether it is safe to keep or must be replaced.

You will need a new airbag if the fabric is torn, burned, or chemically degraded from the deployment powder; if the bag did not fully inflate during the crash; or if the steering wheel rim or dashboard is cracked in a way that would prevent a new bag from deploying into the correct space. Replacement bags are sold as complete assemblies—you cannot patch or repair an airbag.

Sensors often need replacement if the crash was severe enough to trigger multiple airbags or if a sensor was struck directly. A side-impact sensor embedded in a door or seat may be damaged even if the airbag itself is fine. The technician will test each sensor and replace any that do not respond correctly.

Cost of airbag reset and what affects the price

The cost of an airbag reset varies widely depending on what needs to be done. A diagnostic scan and reset of the module alone, with no hardware replacement, typically costs between $100 and $300. This is the minimum if your airbags deployed but the bags and sensors are undamaged.

If one or more airbags need replacement, add $300 to $1,000 per bag depending on the type. A driver-side steering wheel bag is usually less expensive than a passenger-side bag or a side-curtain bag that runs the length of the roof. Seat belt pretensioners, which often deploy alongside airbags, cost $200 to $400 to replace.

Sensor replacement adds $150 to $400 per sensor. If your crash was severe and triggered multiple airbags, you may need to replace sensors in the front bumper, doors, and seats. A full airbag system reset after a serious multi-airbag deployment can easily exceed $2,000 to $4,000 if hardware replacement is involved.

Some insurance policies cover airbag replacement as part of collision coverage, though you will typically pay your deductible. Check your policy to understand whether airbag work is covered and whether you can choose your own repair shop or must use an insurer-approved facility.

Why you should not drive with airbags locked out

Driving with a locked-out airbag system is legal—there is no law that requires airbags to be functional. However, it is unsafe. Airbags reduce the risk of serious injury or death in a frontal crash by 25 to 30 percent, and side airbags reduce side-impact injury risk by similar margins. Without them, you lose that protection.

If you are in a second crash before the airbag system is reset, the bags will not deploy. You will experience the full force of the collision without the cushioning that airbags provide. This is especially dangerous for the driver and front passenger, who rely on frontal airbags to prevent head and chest injury.

The longer you wait to have the system reset, the greater the risk. If you are in a minor fender-bender that does not deploy airbags, you may not notice the system is still locked out. A subsequent crash that would normally trigger the bags will find them unavailable.

How to avoid airbag problems after a crash

After any crash that deploys airbags, contact your insurance company when ready and ask for a referral to a repair facility that specializes in airbag work. Do not attempt to drive the vehicle long distances or in heavy traffic until the airbag system has been inspected and reset. Some insurance companies will arrange a rental car while your vehicle is being repaired.

If you are buying a used vehicle, ask the seller whether the airbags have ever deployed. Request the service records to confirm that any previous deployment was followed by a proper reset and inspection. A vehicle with a history of airbag deployment but no reset documentation is a red flag—the system may be locked out and non-functional.

If you are selling a vehicle with airbags that have deployed, disclose this to the buyer and provide documentation of the reset and any repairs. Failing to disclose airbag history can expose you to liability if the buyer is injured in a crash and discovers the system was not functional.

Frequently Asked Questions

Can I reset my airbags at a regular oil-change shop?

Most general repair shops do not have the diagnostic equipment needed to reset airbag modules. You need a shop with a factory-level diagnostic scanner and a technician trained in airbag systems. Dealerships always have this capability, and many independent shops that specialize in collision repair or electrical work do as well. Call ahead and confirm the shop has airbag reset experience before you bring your vehicle in.

How long does an airbag reset take?

A reset with no hardware replacement typically takes one to two hours. If airbags or sensors need to be replaced, add four to eight hours depending on how many components are involved and how difficult they are to access. Some shops can complete the work the same day; others may need to order parts and schedule you for a second appointment.

Will my airbags deploy again after they are reset?

Yes. Once the module is reset and the system passes its self-test, the airbags are armed and ready to deploy in a future crash. The reset clears the deployment record but does not change how the system works. Your airbags will function normally until they deploy again.

What if the diagnostic scan shows a fault I do not understand?

Ask the technician to explain the fault code in plain language. Common codes refer to sensor faults, wiring breaks, or module communication errors. The technician should tell you which component is faulty and whether it needs to be replaced or if the fault will clear once the deployment code is reset. If you are unsure, request a written estimate that lists each fault and the repair needed.

Is it safe to buy a car with airbags that have been reset?

Yes, as long as the reset was done properly and documented. Ask the seller for proof that a may have access to technician performed the reset and that all damaged components were replaced. If the seller cannot provide documentation, have a pre-purchase inspection done by a shop with airbag diagnostic capability. A properly reset system is as safe as one that has never deployed.