An A&P certificate is a federal license that allows you to legally perform maintenance and repairs on aircraft
An Airframe and Powerplant (A&P) certificate, issued by the Federal Aviation Administration (FAA), is the credential that certifies you are may have access to to inspect, maintain, and repair aircraft structures and engines. It is not optional if you want to work as a mechanic on commercial or general aviation aircraft — the FAA requires it. The certificate comes in two parts: the Airframe rating covers the fuselage, wings, landing gear, and hydraulic systems, while the Powerplant rating covers engines, fuel systems, and ignition systems. Many mechanics earn both ratings, called holding an "A&P ticket."
This certificate is distinct from automotive mechanic training. Aircraft maintenance operates under stricter federal rules because a failure in the air has consequences that ground-based failures do not. The FAA sets the standards for who can sign off on maintenance work, and only A&P-certified mechanics can do so. If you are considering a career in aircraft maintenance, understanding what the certificate requires and what it unlocks is the first step.
Key Takeaways
- An A&P certificate is a federal FAA credential required to legally perform maintenance and repairs on aircraft; it covers either airframe work, powerplant work, or both.
- To earn the certificate, you must complete an FAA-approved training program (typically 1,800 to 2,000 hours), pass three written exams, and pass practical and oral exams administered by an FAA examiner.
- Training can be completed through Part 147 schools (dedicated aviation maintenance schools) or through on-the-job experience combined with self-study, though the school route is faster and more common.
- The certificate does not expire, but you must keep records of your training and experience, and the FAA can audit your qualifications at any time.
- A&P mechanics typically earn between $50,000 and $80,000 annually depending on location, employer type, and whether they hold both ratings.
The two paths to earning your A&P certificate
The FAA recognizes two routes to the A&P certificate: the school route and the experience route. Most people choose the school route because it is faster and more structured. You attend an FAA-approved Part 147 school, which offers dedicated programs in airframe maintenance, powerplant maintenance, or both combined. These programs typically run 18 to 24 months full-time and cover the 1,800 to 2,000 hours of instruction the FAA requires. Part 147 schools are found at community colleges, technical institutes, and private aviation training centers across the country.
The experience route requires you to work under the supervision of an A&P mechanic for a set number of hours — 3,000 hours for airframe, 3,000 for powerplant, or 5,000 if you want both at once. You must also complete a certain amount of self-study or formal classroom instruction outside of work. This path takes longer (typically 3 to 5 years) and requires finding an employer willing to hire and train you as an apprentice. Some employers, particularly at regional airlines or maintenance shops, will hire people without the certificate and help them earn it on the job, but this is less common than it once was.
The school route is generally preferred because you earn the certificate faster, you have a structured curriculum, and employers know exactly what you have learned. The experience route works if you already have a foot in the industry or if you cannot afford full-time school, but it requires more self-discipline and a cooperative employer.
What the written, oral, and practical exams cover
After completing your training (whether through school or experience), you must pass three exams to earn your A&P certificate: a written exam, an oral exam, and a practical exam. All three are administered by an FAA Designated Mechanic Examiner (DME), who is an experienced A&P mechanic authorized by the FAA to test candidates.
The written exam (also called the knowledge test) covers general maintenance theory, regulations, and safety practices. You take it at an FAA testing center and have a set time limit. The exam is multiple-choice and covers topics like aircraft systems, materials, tools, and FAA regulations. You must score at least 70 percent to pass. If you are pursuing both airframe and powerplant ratings, you take separate written exams for each.
The oral exam is a conversation between you and the DME about maintenance procedures, troubleshooting, and decision-making. The examiner asks questions based on your training and experience, and you explain how you would handle real maintenance scenarios. This exam tests whether you understand the "why" behind procedures, not just the steps. It typically lasts 1 to 2 hours.
The practical exam (called the "checkride") is hands-on work performed under the examiner's observation. You might be asked to perform a maintenance task, diagnose a problem, or inspect a component. The examiner watches to see whether you follow proper procedures, use tools correctly, and make safe decisions. This exam can take several hours and is often the most stressful part of the certification process because it is real work, not a simulation.
How long it takes and what it costs
If you attend a Part 147 school, you can earn your A&P certificate in 18 to 24 months of full-time study. Some accelerated programs compress this into 12 to 18 months, though these are more intensive. The total cost of a Part 147 program ranges widely depending on the school and location, but typically falls between $30,000 and $60,000 for tuition, books, and tools. Some schools are more expensive; others less so. Financial aid, including federal student loans and grants, may be available through the school.
If you pursue the experience route, you are looking at 3 to 5 years of work while building your hours. You may earn a wage during this time (which helps offset the cost), but you will also need to pay for any classroom instruction or study materials out of pocket. The total cost is lower upfront, but the opportunity cost — the wages you could have earned in a different job during those years — is higher.
Exam fees are separate. As of the most recent FAA guidance, the written exam costs around $175, and the oral and practical exams are typically bundled at a fee set by the DME, which varies but often ranges from $300 to $500. These fees can change, so check with your local DME or testing center for current rates.
What you can and cannot do with an A&P certificate
With an A&P certificate, you can legally perform maintenance, repairs, and inspections on aircraft and sign off on the work — meaning you certify to the FAA that the work was done correctly and the aircraft is airworthy. You can work for airlines, repair shops, manufacturers, or as an independent contractor. You can also work on your own aircraft if you own one, though you still must follow FAA maintenance standards.
What you cannot do: you cannot perform major repairs or alterations without additional authorization. The FAA has a category called Inspection Authorization (IA), which is a separate credential that allows you to perform certain inspections and approve major work. An IA is not required for most day-to-day maintenance, but it is required if you want to sign off on annual inspections or major repairs. To earn an IA, you must hold an A&P certificate, have at least 3 years of experience as an A&P, and pass an additional exam.
You also cannot perform work on aircraft systems that require specialized training beyond the A&P scope — for example, avionics (aircraft electronics) or certain composite repairs. These require additional type-specific training and certifications.
Where A&P mechanics work and what they earn
A&P mechanics work in several environments: commercial airlines, regional carriers, military bases, aircraft manufacturers, maintenance repair and overhaul (MRO) shops, flight schools, and general aviation facilities. The type of employer affects both the work and the pay. Airlines typically offer the most stable employment and benefits, while smaller shops may offer more variety in the types of aircraft you work on.
Salary varies by location, employer, and experience. According to the U.S. Bureau of Labor Statistics, aircraft mechanics (which includes A&P-certified mechanics) earn a median annual wage in the range of $50,000 to $80,000, with experienced mechanics at major airlines earning significantly more. Overtime is common in the airline industry, which can increase annual earnings. Benefits typically include health insurance, retirement plans, and sometimes free or discounted flights.
Job demand for A&P mechanics has remained steady, with some periods of shortage when the aviation industry is growing. The FAA and industry groups have noted that many experienced mechanics are retiring, which creates openings for newly certified mechanics. However, job availability depends on economic conditions in the aviation sector, which can fluctuate.
Maintaining your certificate and staying current
Unlike a driver's license, an A&P certificate does not expire. Once you earn it, it is yours for life — the FAA does not require you to renew it or take refresher exams. However, you must keep records of your training and work experience, because the FAA can audit your qualifications at any time, especially if there is an accident or incident involving work you performed.
Staying current in the field is a practical matter, not a regulatory one. Aviation technology and procedures change, and employers expect you to keep up. Many employers require or strongly encourage continuing education through workshops, online courses, or manufacturer training. Some airlines and large shops have their own training programs that all mechanics must complete. If you take a long break from aircraft maintenance work, you may need to complete refresher training before returning to the job, depending on your employer's policies.
Frequently Asked Questions
Can I get an A&P certificate if I do not have a high school diploma?
The FAA does not require a high school diploma to earn an A&P certificate, but most Part 147 schools do. If you do not have a diploma, you may be able to pursue the experience route (working under an A&P mechanic) or look for schools that accept a GED or equivalent. Check with individual schools about their admission requirements.
How long does it take to get a job after earning your A&P certificate?
Many mechanics find work within weeks of earning their certificate, especially if they completed their training at a Part 147 school with job placement support. Some employers hire directly from schools. Others take longer to find the right fit. Having both airframe and powerplant ratings makes you more marketable than having just one.
Do I need an A&P certificate to work on small private aircraft?
It depends on the work. If you are performing maintenance that affects airworthiness, you need an A&P certificate. However, owners of small aircraft can perform certain maintenance tasks themselves without a certificate, as long as the work is on their own aircraft and does not require a mechanic's sign-off. Check the FAA's regulations for your specific aircraft type.
What is the difference between an A&P certificate and an IA?
An A&P certificate allows you to perform maintenance and repairs and sign off on that work. An Inspection Authorization (IA) is an additional credential that allows you to perform certain inspections (like annual inspections) and approve major repairs. You must have an A&P certificate and at least 3 years of experience to earn an IA.
Can I earn just the Airframe rating without the Powerplant rating?
Yes. You can earn either rating separately or both together. Many mechanics start with one rating and earn the second later. Some employers prefer mechanics with both ratings, but some shops specialize in airframe or powerplant work and hire mechanics with just one rating.