The AM125424C is a Mopar part number that helps you find the exact replacement component your Chrysler, Dodge, or Jeep needs

When you see "AM125424C" on a parts list or invoice, you are looking at a Mopar original equipment manufacturer (OEM) part number. Mopar is Chrysler's parts division, and this number is their internal code for a specific component. The letter "C" at the end indicates a revision or update to that part — meaning Mopar has made a change to the design, material, or fit since the original version was released.

A cross reference is a tool that translates one part number into another. If you have an AM125424C number but want to know what aftermarket brands carry the same part, or if you need to find what this component actually does in your vehicle, a cross reference tells you. It is the bridge between Mopar's naming system and everyone else's.

Understanding what this number represents matters because buying the wrong part — or the right part in the wrong revision — can mean a component that does not fit, does not seal properly, or fails early. The "C" revision exists because someone found a problem with earlier versions.

Key Takeaways

  • AM125424C is a Mopar part number, and the "C" means it is a revised version of an earlier part design.
  • Cross references let you find the same part under different brand names or part numbers from other suppliers.
  • Aftermarket suppliers like Dorman, Standard Motor Products, and Motorcraft often carry Mopar parts under their own numbers.
  • Always verify the revision letter matches what your vehicle needs, because earlier versions (A, B) may not work the same way.
  • Your vehicle's service manual or parts diagram will tell you whether AM125424C or an earlier revision is correct for your year and engine.

What the AM125424C actually controls in your vehicle

The AM125424C is most commonly a solenoid, sensor, or valve assembly used in Chrysler emission control or fuel delivery systems. Without knowing your specific vehicle year, engine, and model, the exact function cannot be pinned down — Mopar reuses numbers across different applications. However, the "AM" prefix typically indicates it is an electrical component or assembly rather than a mechanical part like a hose or bracket.

If you found this number on a repair invoice or parts diagram, the best way to confirm what it does is to check your vehicle's service manual for that year and engine. The manual will show you where the part sits, what it connects to, and what happens if it fails. You can also ask the shop or parts counter what system they pulled this number from — emission control, fuel injection, transmission, or cooling.

Knowing the function matters because it tells you how urgent the replacement is. A failed emission solenoid might trigger a check engine light but not prevent you from driving. A failed fuel delivery component can leave you stranded.

How to find what other brands call this same part

A cross reference works by matching the physical specifications and function of the Mopar part to the same component sold under a different number by another manufacturer. The most reliable way to cross-reference AM125424C is to use one of these resources:

  • RockAuto, AutoZone, or O'Reilly Auto Parts websites: Enter the AM125424C number in the search box. If the site recognizes it, it will show you aftermarket equivalents and their prices. Not every site carries every number, so trying two or three increases your chances.
  • Your vehicle's service manual: The parts diagram will list both the Mopar number and any cross-reference numbers Chrysler recognizes. This is the most authoritative source.
  • A Mopar dealer parts counter: They can tell you when ready what the part does and whether an aftermarket equivalent exists. They may also tell you if the "C" revision is critical for your year.
  • Aftermarket brand websites: Dorman, Standard Motor Products, Motorcraft, and Bosch all publish cross-reference charts. You enter the Mopar number and get their equivalent.

Common aftermarket brands that carry Mopar components under their own numbers include Dorman (often for solenoids and valves), Standard Motor Products (sensors and switches), Motorcraft (Ford-branded but sometimes compatible), and Bosch (fuel and ignition components). Prices vary widely — an OEM Mopar part may cost 40 to 60 percent more than an aftermarket equivalent, but both should meet the same performance standard if the cross reference is accurate.

Why the "C" revision matters and when to use earlier versions

Mopar adds a letter suffix (A, B, C, D, and so on) when they change a part's design, materials, or fit. The "C" revision means at least two earlier versions existed and had issues. Those issues might have been poor fit, premature failure, incompatibility with newer engines, or a design flaw discovered after release.

Using an earlier revision (AM125424A or AM125424B) in place of the "C" is a gamble. It may fit and work fine, or it may fail within months. The revision letter exists because Mopar learned something. If a shop or parts supplier offers you an older revision at a discount, ask why. Sometimes they are clearing old stock; sometimes they do not have the current version in supply.

Your vehicle's service manual will specify which revision is correct for your year and engine. If you are replacing a failed part, use the same revision that came out of the vehicle — that is the safest choice. If you are doing preventive maintenance and the manual lists AM125424C, do not settle for an earlier letter.

When to buy OEM Mopar versus aftermarket equivalents

An OEM Mopar part carries Mopar's warranty and is may provide to be the exact specification Chrysler designed for your vehicle. An aftermarket equivalent carries the aftermarket brand's warranty, which is usually shorter (often one year instead of three). Both should work, but the risk profile is different.

Buy OEM Mopar (the AM125424C itself) if the part is critical to engine function, emission control, or safety — such as a fuel injector solenoid, transmission valve, or brake component. The extra cost is insurance against a mismatch or early failure. Buy aftermarket if the part is less critical, you are on a tight budget, and the cross reference is clear and well-documented by the aftermarket brand.

One practical middle ground: buy the aftermarket part but keep the receipt and warranty paperwork. If it fails within the warranty period, you can return it and try the OEM version. This approach lets you test whether the cross reference is accurate for your specific vehicle without committing to the higher OEM price upfront.

How to verify the cross reference is correct before you buy

A cross reference is only as good as the source that created it. A mistake in the database can send you home with a part that looks right but does not fit or function correctly. Before you hand over money, do these checks:

  • Confirm the year, make, model, and engine of your vehicle match what the parts site shows for the AM125424C.
  • Read the product description on the aftermarket part page. It should mention the same system (fuel, emission, transmission, cooling) that your manual lists for the Mopar number.
  • If the aftermarket site shows a photo, compare the connector type, size, and mounting points to photos of the original part if you can find them online.
  • Call the parts counter and describe your vehicle. Ask them to confirm the cross reference before they ring it up. A good counter will double-check.
  • If the price seems too low or too high compared to other sources, ask why. A price that is 20 percent lower might mean a different revision or a discontinued part being cleared out.

The most common mistake is assuming a cross reference works for all years of a model. Chrysler changed part numbers frequently, especially for emission and fuel components. A number that works for a 2015 Dodge may not work for a 2016 Dodge of the same model. Always verify the year first.

Where to find the AM125424C number on your vehicle or paperwork

If you are looking for this part number on your own vehicle, it will be printed on the component itself — usually on a label or stamped into the plastic or metal housing. You may need to remove the part to read it clearly. If you are working from a repair invoice or parts diagram, the number will be listed next to the component name and a description of what it does.

If you have lost the paperwork and cannot locate the part on the vehicle, a Mopar dealer can pull the correct part number from your vehicle identification number (VIN). Bring your VIN and describe the system or symptom (check engine light, fuel pressure problem, transmission shift issue) and they can look it up in seconds. There is usually no charge for this service.

Frequently Asked Questions

Can I use an AM125424A or AM125424B instead of the C version?

Not safely without checking your manual first. The "C" revision exists because Mopar changed something — fit, material, or function. Using an older revision may work temporarily but risks premature failure or a poor fit. Your service manual will tell you which revision your vehicle needs.

What does the AM prefix mean?

The "AM" indicates it is a Mopar assembly or electrical component, as opposed to a straightforward bracket or hose. It does not tell you the exact function, but it narrows the category. The full number and your vehicle's manual are needed to know what it actually does.

Is a cross-referenced aftermarket part as good as the original Mopar?

If the cross reference is accurate and the aftermarket brand is reputable, yes — both should meet the same performance standard. The difference is warranty length and the risk that the cross reference is wrong. OEM carries longer warranty and zero risk of a mismatch.

How do I know if a cross reference is wrong?

The part will not fit, the connector will not match, or the component will not function correctly once installed. If you suspect a mismatch before installation, stop and call the parts counter or a shop. If it fails after installation, return it under warranty and try the OEM version or a different aftermarket brand.

Where can I find the service manual for my vehicle to verify the part number?

Mopar service manuals are available through Chrysler dealers, online retailers like Amazon or eBay, and subscription services like ALLDATA or Mitchell1. Your local library may also have access to repair manuals through their database subscriptions. The manual for your year and model will have the correct part number and revision.