What ASE Certification Classes Cover

ASE (Automotive Service Excellence) certification classes teach the technical knowledge and hands-on skills needed to pass ASE exams, which test competency in specific automotive repair areas. These classes are not run by ASE itself — ASE only creates and administers the exams. Instead, vocational schools, community colleges, trade schools, and private training providers offer the actual instruction.

A typical ASE class focuses on one of nine main areas: engine repair, automatic transmissions, manual drivetrains, suspension and steering, brakes, electrical systems, heating and air conditioning, engine performance, or light vehicle diesel engines. Some programs bundle multiple areas into a single course; others teach each as a standalone class. The content covers both theory (how a system works, why it fails, what the symptoms mean) and practical work (diagnosing problems, replacing parts, using diagnostic tools).

Classes usually run between 40 and 160 hours depending on the provider and depth of the subject. A community college might offer a full semester course; a private training center might compress the same material into an intensive week or two. Most include hands-on lab time where you work on actual vehicles or training equipment under instructor supervision.

Key Takeaways

  • ASE classes are taught by vocational schools, community colleges, and private training providers — not by ASE itself, which only creates the exams.
  • Each class focuses on one repair specialty (brakes, electrical, engine performance, etc.) and typically runs 40 to 160 hours depending on the provider.
  • Classes combine classroom instruction on how systems work with hands-on lab time working on real vehicles or training equipment.
  • Completing a class does not automatically certify you — you must still pass the ASE exam for that specialty to earn the credential.
  • Cost varies widely by provider and location, from a few hundred dollars at a community college to several thousand at a private trade school.

Where to Find ASE Classes Near You

Community colleges in your state almost always offer ASE prep courses, usually as part of an automotive technology program or as standalone evening and weekend classes. These are typically the lowest-cost option and often allow you to take individual courses without enrolling in a full degree program. Call your local community college's continuing education or workforce development department to ask what ASE courses they currently offer and when they start.

Vocational and trade schools also teach ASE content, often as part of a longer automotive technician diploma or certificate program. These programs are more intensive and expensive than community college courses but may move faster and include more hands-on time. Some are public (run by your school district) and some are private.

Private training centers and online platforms offer ASE prep classes as well, with varying quality and cost. Some are designed for people already working in shops who need to fill knowledge gaps before taking the exam; others are full programs for people starting from scratch. Ask any provider whether their instructors are themselves ASE-certified and whether they have access to real vehicles or training equipment for lab work.

What Happens During a Typical Class

Most ASE classes split time between lecture and hands-on work. In the lecture portion, an instructor explains how a system works — for example, how an automatic transmission shifts gears, what sensors control it, and what goes wrong when it fails. You learn to read wiring diagrams, understand diagnostic trouble codes, and recognize symptoms that point to specific problems.

During lab time, you work in small groups on vehicles or training stands. You might replace brake pads, diagnose an electrical fault using a multimeter, or run a scan tool to read engine codes. The instructor circulates, answers questions, and makes sure you understand not just the steps but the reasoning behind them. This is where you build the muscle memory and troubleshooting instinct that the ASE exam tests.

Most classes also include practice exams — either provided by the instructor or through ASE's official study materials. These help you see what the real exam looks like and identify weak areas before test day. Some providers include exam registration and testing fees in the class cost; others charge separately.

How ASE Classes Differ From Self-Study

You can study for an ASE exam on your own using books, videos, and practice tests without taking a class. Many technicians do this, especially if they already have years of shop experience and just need to formalize their knowledge. Self-study is cheaper and more flexible — you work at your own pace on your own schedule.

A class, by contrast, gives you structured instruction, hands-on practice with equipment you might not own, and feedback from someone who knows what the exam tests. If you are new to automotive work or weak in a particular area, a class usually gets you to exam-ready faster and with higher confidence. If you are already experienced in a specialty but just need to pass the exam, self-study may be enough.

Some people combine both: they take a class for the core knowledge and hands-on work, then self-study for a few weeks before the exam to drill weak areas and practice test questions.

Cost and Time Commitment

Community college ASE courses typically cost between $300 and $800 per course, depending on your state and whether you are a resident. Vocational schools and private trade programs range from $1,000 to $5,000 or more for a full automotive program, though individual ASE prep courses may be less. Online and self-paced programs vary widely — some charge per course, others per month or as a flat fee for access to all materials.

Time commitment depends on the format. A full-time intensive program might run 8 to 12 weeks. A part-time evening or weekend class at a community college might meet once or twice a week for a semester (12 to 16 weeks). Online self-paced courses let you move faster or slower depending on your schedule, but most providers recommend 4 to 12 weeks to complete one specialty.

Many employers offer tuition reimbursement or pay for employees to take ASE classes, especially if you work in a shop and the class covers a specialty your shop needs. Ask your manager whether this is an option before you pay out of pocket.

What You Need Before Starting a Class

Most ASE classes assume you have basic mechanical knowledge — you understand what a wrench is, you can follow written instructions, and you are comfortable working with your hands. If you have never turned a wrench, some providers offer a foundational automotive basics class first.

You do not need to own tools or a vehicle. The class provides access to shop equipment, diagnostic tools, and training vehicles. However, having your own basic hand tools (wrench set, screwdrivers, pliers) is helpful for practice and future work.

Some classes require or recommend that you have a high school diploma or GED, though this varies by provider. A few ask that you have some work experience in an automotive shop, but many accept complete beginners. Call the provider and ask what their prerequisites are.

After You Complete a Class: Taking the ASE Exam

Finishing a class does not make you ASE-certified. You must register for and pass the ASE exam in that specialty. ASE exams are computer-based, offered year-round at testing centers across the country. You register through ASE's website, pay the exam fee (typically $40 to $50 per test), and schedule a time at a nearby testing center.

The exam is 40 to 80 multiple-choice questions depending on the specialty, and you have 60 minutes to complete it. You need a score of around 70 percent to pass, though the exact passing score varies slightly by test. Results are available when ready after you finish.

If you pass, ASE sends you a certificate and you can use the ASE credential on your resume and business cards. If you do not pass, you can retake the exam after waiting 14 days. Many people retake it after a few weeks of additional study or practice.

Frequently Asked Questions

Do I need to take a class to pass the ASE exam?

No. Many technicians pass ASE exams through self-study and work experience alone. A class helps if you are new to the field, weak in a specific area, or prefer structured instruction and hands-on practice. If you already have years of shop experience, you may only need to study practice tests and review materials.

How long does it take to become ASE-certified after finishing a class?

That depends on you. You can register for the exam when ready after class ends, so you could be certified within days if you pass on your first try. Most people take the exam within a few weeks of finishing class. If you do not pass, you can retake it after 14 days, so the whole process might take a month or two.

Can I take ASE classes online?

Yes, many providers offer online or hybrid classes where you watch lectures and take quizzes online but come to a physical location for hands-on lab work. Some fully online programs exist, though they cannot replace the hands-on practice that most people need before the exam. Ask the provider whether their online option includes access to a physical shop or training equipment.

Will an ASE class help me get a job as a technician?

An ASE certification shows employers that you have tested knowledge in a specific area, which is valuable. However, most shops also want to see work experience. Some employers hire people with ASE certification but no shop experience and train them on the job. Others prefer to hire experienced technicians and then send them for ASE certification. Your best path depends on the shops in your area — ask local shops what they look for when hiring.

What if I fail the ASE exam after taking a class?

You can retake it after 14 days. Many people spend a few weeks reviewing weak areas, working through practice tests, or taking a refresher session before retrying. Some providers offer free or discounted retake prep for students who did not pass on the first attempt.