Auto start installation typically costs between $300 and $1,500, depending on your vehicle, the system you choose, and whether the installer has to modify your wiring or security system.
The wide range exists because remote start is not one product—it is a category with real differences in what you get and how much work the installation takes. A basic aftermarket remote start on a car with a straightforward ignition system costs far less than adding remote start to a vehicle with push-button ignition, keyless entry, or factory security that fights aftermarket systems. Labour time, local shop rates, and whether your car needs extra parts all shift the final bill.
The cost also depends on whether you want remote start alone or bundled with other features like keyless entry, alarm systems, or GPS tracking. A shop will quote you based on what your specific vehicle needs, not a flat rate.
Key Takeaways
- Basic remote start on a standard ignition system usually runs $300 to $600, while push-button ignition vehicles often cost $800 to $1,500 because the installer must integrate with factory electronics.
- Labour makes up most of the cost—shops charge $50 to $150 per hour, and installation typically takes two to four hours depending on your vehicle's wiring complexity.
- Aftermarket systems from brands like Viper, Compustar, and Avital range from $100 to $400 for the unit itself, but the device cost is only part of your total bill.
- Dealership installation is usually more expensive than independent shops but may preserve your factory warranty, while independent installers often charge less and finish faster.
- Some vehicles with factory security systems or immobilizers require additional modules that add $100 to $300 to the total cost.
How the type of ignition system affects your cost
The biggest cost driver is your vehicle's ignition type. A traditional key ignition is the cheapest to work with—the installer runs wires from the remote start module to your starter and ignition switch, a straightforward job that takes one to two hours. This is why older vehicles and basic economy cars usually fall in the $300 to $600 range.
Push-button ignition systems are more expensive because they do not have a mechanical ignition switch the installer can wire directly. Instead, the remote start module must communicate with your vehicle's computer and security system. The installer needs to tap into the car's CAN bus (the network that lets all the electronic modules talk to each other) or use a bypass module that tricks the car into thinking the key fob is present. This adds complexity, time, and often the cost of an extra module. Push-button vehicles typically run $800 to $1,500.
Keyless entry without push-button start falls somewhere in the middle—usually $500 to $900. The installer can wire to the ignition switch, but must also integrate with the keyless system so the car recognizes the remote start command as legitimate.
Labour costs and installation time
Most of what you pay goes to labour, not the device itself. Independent shops typically charge $50 to $100 per hour, while dealerships and high-end car audio shops charge $100 to $150 per hour. A straightforward installation on a standard ignition takes two to three hours. A complex job on a push-button vehicle with factory security can stretch to four to six hours.
The installer must run wires through your dashboard, under the steering column, and sometimes through the firewall to reach the starter. They need to locate the correct wires without cutting into factory harnesses, test the system multiple times, and make sure the remote start does not interfere with your car's other electronics. Rushing this work causes problems—dead batteries, failed starts, or security system conflicts that show up weeks later.
Some shops charge a flat rate for your vehicle model instead of hourly labour. This can save money if the job runs long, but costs more if the installer finishes quickly. Ask whether the quote is flat-rate or hourly before you commit.
Aftermarket system brands and their price ranges
The remote start unit itself ranges from $100 to $400 depending on the brand and features. Viper systems are among the most expensive ($250 to $400) but are known for reliability and integration with factory security. Compustar and Avital (which is owned by Viper) offer mid-range options ($150 to $300) with good reviews and solid warranty coverage. Budget brands like Crimestopper and Bulldog run $100 to $200 but have fewer features and shorter warranties.
The device cost alone does not determine your total bill. A $150 Compustar system on a push-button car will still cost $1,000 to $1,500 installed because of the labour and integration work. A $300 Viper system on a key-ignition car might cost only $600 total because the installation is simpler.
Most systems come with a one-year to three-year warranty on parts and labour. Check what the warranty covers—some shops warranty only the device, not the installation work, so if something fails after six months you pay labour again to fix it.
Dealership versus independent shop installation
Dealerships typically charge $1,000 to $2,000 for remote start installation, sometimes more. They use factory-approved systems (or systems they have tested extensively with your vehicle model), their technicians know your car's electronics inside out, and the work is covered under your factory warranty. If something goes wrong, the dealer fixes it under warranty without argument.
Independent car audio and security shops usually charge $400 to $1,200 for the same job. They often finish faster, have more flexibility with system choices, and may offer better pricing. The trade-off is that the work is not part of your factory warranty—if a problem arises, you deal with the shop, not the dealer. Choose an independent shop with strong reviews and ask whether they warranty their labour for at least one year.
If your vehicle is still under factory warranty, check your owner's manual or call the dealer before going to an independent shop. Some dealers will void the warranty if you install aftermarket electronics, though this is becoming less common. Others only void the warranty for the specific system that failed, not the whole car.
Additional costs and hidden factors
Some vehicles need extra modules or adapters that add to the bill. If your car has a factory immobilizer (a security chip in the key that prevents the engine from starting without it), the installer may need a bypass module ($100 to $200) so the remote start can communicate with the immobilizer. Vehicles with factory alarm systems sometimes need integration modules ($50 to $150) so the remote start does not trigger the alarm.
If you want the remote start to work with your factory key fob instead of a separate remote, that integration costs extra—usually $100 to $300 more. Some shops charge extra for features like heated seat set up, trunk pop, or GPS tracking integration.
Ask the shop for a full written quote that lists the device, labour hours, any modules or adapters, and all features included. Do not accept a verbal estimate—get it in writing so there are no surprises when you pick up the car.
What affects whether remote start is worth the cost
Remote start is a convenience feature, not a maintenance item or safety system. It does not extend your engine's life or prevent breakdowns. What it does is let you warm up the car on cold mornings or cool it down in summer heat before you get in—useful in harsh climates, less so in mild ones.
The cost-to-benefit calculation depends on your climate and how long you plan to keep the car. If you live somewhere with winters below freezing and you drive the same car for five or more years, remote start may feel worth $600 to $800. If you live in a warm climate or trade cars every three years, it is probably not worth $1,000 to $1,500.
Remote start also adds a small load to your battery and electrical system. If your battery is already weak or your alternator is aging, remote start can speed up the need for replacement. This is not a reason to avoid it, but it is worth knowing before you install it on an older vehicle.
Frequently Asked Questions
Can I install remote start myself to save money?
If you have experience with car wiring and your vehicle has a straightforward key ignition, you might manage it. Most people should not attempt this—a mistake can damage your car's electrical system, disable the starter, or trigger the security system in ways that are expensive to fix. The labour savings ($300 to $600) are not worth the risk.
Will remote start drain my battery if I do not drive the car for a week?
Remote start draws power when the engine runs, just like normal starting does. If you use it once a day, the battery recharges normally. If you remote-start the car every day but do not drive it, you could drain the battery over a week or two. Most systems have a timer that shuts the engine off after 10 to 15 minutes to prevent this.
Does remote start void my factory warranty?
Not automatically. Most manufacturers cannot void your entire warranty because of aftermarket electronics. However, if the remote start system causes a failure—for example, if a wiring mistake damages the starter—the dealer may not cover that specific repair. Ask your dealer in writing before installation if you are concerned.
What is the difference between a one-way and two-way remote start system?
A one-way system sends a signal to start the car but does not confirm that it started—you have to look outside to know if it worked. A two-way system sends a signal back to your remote to confirm the engine is running, usually with lights or a beep. Two-way systems cost $50 to $150 more but are more reliable in areas with radio interference.
Can I add remote start to a car with a manual transmission?
Most aftermarket remote start systems will not work with manual transmissions because the installer cannot may provide the car will not roll when the engine starts. Some high-end systems can be programmed to work with manuals if the car is in neutral and the parking brake is set, but this requires a more expensive system and careful installation. Ask the shop whether they support your specific manual transmission model.