BMW key batteries typically last three to four years before they need replacement

When your BMW key fob stops locking or unlocking your car, the battery is usually the culprit. Most BMW key fobs use a CR2032 coin-cell battery, the same type found in watches and calculators. You can replace it yourself in under five minutes with no tools other than a coin, or you can have a BMW dealer or independent shop do it for around $10 to $30 in labor.

The battery itself costs $3 to $8 at any pharmacy, grocery store, or hardware store. Replacing it yourself saves the service call entirely. Even if you are not comfortable opening the key fob, the cost is low enough that this is one of the cheapest maintenance items on a BMW.

Key Takeaways

  • Most BMW key fobs use a CR2032 battery that you can buy at any drugstore for $3 to $8.
  • You can open the key fob with a coin by sliding it into the seam and twisting gently — no special tools needed.
  • After replacing the battery, test the lock and unlock buttons before closing the fob back up.
  • If the key still does not work after a new battery, the fob itself may be damaged and will need replacement from a dealer.

How to open your BMW key fob

Look at the edge of your key fob for a small seam running around the perimeter. Insert a coin (a dime or penny works) into that seam and twist gently. The fob will separate into two halves. Do not force it — if it is not moving, you may be in the wrong seam or twisting too hard.

Once the fob is open, you will see the battery sitting in a small metal holder. Note which side is facing up (the positive or negative side). This matters when you put the new battery in.

Removing and replacing the battery

Lift the battery out of its holder. If it is stuck, use your fingernail or the edge of the coin to gently pry it up. Drop the new CR2032 battery into the holder with the same side facing up as the old one was. The battery should sit flat and click into place.

Before you close the fob, press the lock and unlock buttons a few times to make sure the new battery is working. You should hear a click or feel a slight vibration. If nothing happens, the battery may be in backwards — flip it and try again.

Closing the key fob and testing

Once the buttons work, line up the two halves of the fob and press them together firmly until you hear a click. The seam should be flush all the way around. Test the lock and unlock buttons from a few feet away from your car to confirm everything is working before you put the key away.

If the buttons work but your car does not respond, the problem may be with your car's receiver rather than the key fob. Try the key on another BMW if you have access to one, or contact a BMW dealer to diagnose the issue.

When to replace the entire key fob instead

If the new battery does not fix the problem, or if the fob is cracked, wet, or the buttons are stuck, the fob itself needs replacement. A new OEM (original equipment manufacturer) BMW key fob costs $200 to $400 from a dealer, plus programming. Some independent locksmiths offer aftermarket fobs for $80 to $150, though these may have fewer features.

Programming is required no matter which fob you buy. Most dealers will program it as part of the purchase, but some charge an additional $50 to $100 if you bring a fob you bought elsewhere. Ask about programming costs before you buy.

Where to buy a CR2032 battery

You do not need to go to a BMW dealer for the battery itself. Any pharmacy, grocery store, big-box retailer, or hardware store carries CR2032 batteries in the watch or electronics section. Walmart, CVS, Walgreens, Target, and Amazon all stock them. Buying in person means you can test the battery in your fob when ready and return it if it does not work.

If you buy online, order from a retailer with a return policy in case the battery is defective. Some batteries are sold in multipacks, which is useful if you have multiple key fobs or want spares on hand.

Frequently Asked Questions

How do I know if my BMW key battery is dead?

The lock and unlock buttons will stop working, or they will work only when you hold the fob very close to the car. The fob itself will not show any visible damage or water inside. If the buttons are physically stuck or the fob is wet, the battery is not the problem.

Can I use a different battery size if I cannot find a CR2032?

No. The CR2032 is the correct size for most BMW key fobs, and using a different battery can damage the fob or cause it to malfunction. If your local store is out of CR2032 batteries, order one online or try another retailer — they are widely available.

What if I drop the battery or lose it while replacing it?

Buy a new one. CR2032 batteries cost only a few dollars, and it is not worth trying to reuse one that has been dropped or lost. Keep the packaging so you know exactly which battery to buy as a replacement.

Do I need to reprogram my key fob after changing the battery?

No. Changing the battery does not erase any programming. Your fob will work exactly as it did before once the new battery is installed and the buttons respond to your presses.