What happens when you delete the spare tire from a Ford Bronco
A spare tire delete means removing the factory-mounted spare tire, the carrier, and sometimes the associated hardware from your Bronco. Ford installs a full-size spare on most Bronco models — either mounted on the rear door (two-door models) or underneath the vehicle (four-door models). When you delete it, you lose the physical spare but also free up weight, cargo space, and the visual bulk of a tire carrier on your vehicle.
The real trade-off is straightforward: you gain roughly 50 to 80 pounds of weight reduction and reclaim cargo space or a cleaner rear appearance, but you lose the ability to change a tire roadside without calling for help. For owners who plan to carry a plug kit, portable air compressor, and a tire repair service membership instead, that calculation makes sense. For others, it creates a genuine safety gap.
Whether a delete makes sense depends on how far you typically drive from cell service, what terrain you use the Bronco on, and whether you trust a tire repair kit to work when you need it. A Bronco driven mostly on paved roads within range of a tow truck is a different situation than one used for backcountry travel.
Key Takeaways
- Removing the spare tire saves 50 to 80 pounds and frees up cargo or aesthetic space, but eliminates your ability to change a tire without outside help.
- A spare tire delete requires removing the carrier hardware and sometimes modifying the rear door or undercarriage, which takes a few hours and costs between $200 and $600 depending on what you remove.
- Owners who delete the spare typically carry a tire plug kit, portable air compressor, and a roadside information membership as backup.
- Broncos used for off-road or remote travel carry higher risk with a delete because cell service may not exist and a tire repair kit may not work on sidewall damage.
- Some aftermarket carriers can be removed and reinstalled, giving you the option to carry a spare only when you plan longer trips.
Why Bronco owners choose to delete the spare
The most common reason is weight reduction. A full-size spare tire and carrier assembly weighs 50 to 80 pounds depending on the tire size and carrier type. On a vehicle where every pound affects fuel economy and acceleration, that matters. Owners who track their Bronco or prioritize performance notice the difference.
The second reason is visual. The factory spare carrier on the rear door of a two-door Bronco is bulky and changes the vehicle's profile. Removing it gives a cleaner look and opens up the door for custom graphics, panels, or a different aesthetic. Some owners also delete the spare to make room for a different rear-mounted accessory — a jerry can holder, a custom bumper, or a roof rack extension.
The third reason is cargo space. Four-door Broncos carry the spare underneath, which limits what you can store in that area or how low you can position other gear. Deleting it opens up that real estate for additional storage or a lower center of gravity for other equipment.
What you need to remove and the work involved
The exact removal depends on which Bronco generation and body style you own. On two-door models, you remove the spare tire carrier bracket from the rear door, the tire itself, and any associated mounting hardware. On four-door models, you remove the tire from underneath, the carrier assembly, and sometimes the mounting frame bolted to the frame.
The work is straightforward but not trivial. You will need basic hand tools — wrenches, sockets, and a jack to safely access the spare. On two-door models, the job typically takes 1 to 2 hours. On four-door models, it can take 2 to 4 hours because you have to get underneath the vehicle and may need to remove other components to access all the bolts. If you have the work done at a shop, expect to pay $200 to $600 in labor depending on your location and the shop's hourly rate.
Some owners also remove the mounting bracket and any associated wiring or sensors that were part of the spare tire system. This is optional but makes the deletion cleaner. If you plan to reinstall a spare later, document where everything bolts and keep the hardware in a labeled container.
The safety and reliability side of going without a spare
A tire failure on the highway is manageable without a spare if you have cell service and a roadside information membership. You call for a tow truck, wait 30 to 90 minutes, and get towed to a shop. The inconvenience is real but the risk is low. A tire failure 20 miles into a backcountry trail with no cell service is a different problem — you are stranded until someone finds you or you walk out.
A tire plug kit and portable air compressor can handle a puncture in the tread — a nail, a screw, or a small hole. They cannot handle a sidewall puncture, a blowout, or damage from hitting a rock or pothole. In off-road conditions, sidewall damage is common. On pavement, it is less likely but still possible. The plug kit is a backup for a specific type of failure, not a replacement for a spare.
Roadside information memberships like AAA cover towing, but they have limits. Most cover 100 miles of towing per incident. If you are 150 miles from the nearest tire shop, you pay the overage. Some memberships also have wait times — during peak hours or in remote areas, a tow truck may take several hours to reach you. In winter or bad weather, that wait becomes a safety issue.
Alternatives to a full delete: removable and lightweight carriers
If you want the option to carry a spare without the permanent weight, several aftermarket carriers can be removed and reinstalled. A removable tire carrier bolts to your rear bumper or frame and can come off in 15 to 30 minutes with basic tools. You install it before a long trip and remove it for daily driving. This gives you the spare when you need it and the weight savings when you do not.
Lightweight spare options also exist. Some owners replace the full-size spare with a compact or collapsible spare, which weighs 20 to 30 pounds instead of 50 to 80. You still have a backup, but the weight penalty is smaller. This is a middle ground — you keep the safety net but reduce the cost of carrying it.
Another option is a tire repair system like a plug kit and compressor mounted in a small under-seat or cargo box. This takes up minimal space and weight, costs $50 to $150, and covers the most common puncture scenarios. Paired with a roadside information membership, it covers most highway breakdowns. It does not cover sidewall damage or severe failures, but it handles the majority of tire problems.
What to do with the spare tire and carrier after removal
If you remove the spare, you now own a tire, a carrier, and mounting hardware that you no longer need. Selling them is the most common option. A used factory Bronco spare tire and carrier typically sells for $150 to $400 depending on condition and whether the tire still has tread. List them on Facebook Marketplace, Craigslist, or a Bronco-specific forum — there are always owners looking for replacements or backups.
If the tire is in good condition, you can also donate it to a local tire shop, which may use it for inventory or recycling. Some shops will even pick it up. The carrier can go to a scrap metal recycler if you cannot sell it, though the payout is minimal.
Keep the mounting hardware and bolts in a labeled bag. If you ever want to reinstall a spare — whether the factory one or a different carrier — you will need those parts. Losing them means buying new hardware or paying a shop to source and install it.
Frequently Asked Questions
Will deleting the spare tire affect my Bronco's warranty?
Ford's warranty does not cover the spare tire system itself, so removing it will not void your overall warranty. However, if the removal damages other components — the rear door, the frame, or wiring — those damages would not be covered. Have the work done carefully or by a shop experienced with Bronco modifications.
Can I reinstall the spare tire later if I change my mind?
Yes, as long as you keep the original hardware and carrier. The bolts, brackets, and mounting points do not disappear when you remove the spare. Reinstalling takes the same amount of time as removal. If you sell the carrier or lose the hardware, you will need to buy replacements, which can cost $300 to $600.
What tire repair kit should I carry instead of a spare?
Look for a plug kit that includes rubber strips, a reaming tool, and adhesive — brands like Dynaplug or Slime make reliable kits for $30 to $60. Pair it with a portable air compressor (12V or battery-powered, $40 to $150) and a tire pressure gauge. This combination handles most tread punctures. It does not replace a spare for sidewall damage or severe failures.
Does removing the spare tire improve fuel economy?
Removing 50 to 80 pounds will improve fuel economy slightly — typically 0.5 to 1 mile per gallon in real-world driving. The improvement is noticeable over time but not dramatic. If fuel economy is your main goal, other modifications like tire pressure optimization or aerodynamic changes have larger effects.
Is a spare tire delete safe for towing?
A spare delete does not affect your Bronco's towing capacity or the safety of towing itself. However, if you have a tire failure while towing, you have no spare for either the Bronco or the trailer. If you tow regularly, keeping a spare — or at least a removable carrier you can install before towing — is a practical choice.