The Bugatti Rimac facility is a hypercar development and testing centre near Zagreb, Croatia, not a public track you can visit or drive on

The Bugatti Rimac test track in Velika Gorica is a private engineering facility owned by Rimac Automobili, a Croatian electric hypercar manufacturer. It is not a public racing circuit, driving experience venue, or place where owners can take their own cars. The track exists solely for the company's internal testing of prototype vehicles, performance validation, and engineering development work.

If you arrived here looking for a place to test your own vehicle's performance or to experience high-speed driving, this facility will not be available to you. Understanding what this track actually is—and what it is not—matters because it clarifies what role testing plays in hypercar development and why manufacturers need dedicated private facilities rather than public roads or commercial tracks.

Key Takeaways

  • Bugatti Rimac's Velika Gorica facility is a private testing centre for the company's own hypercar prototypes and production vehicles, not a public track.
  • The track is used for performance validation, safety testing, and engineering development work that cannot be done on public roads or in standard facilities.
  • Hypercar manufacturers require private test facilities because their vehicles operate at speeds and power levels that exceed what public infrastructure can accommodate.
  • If you own a high-performance vehicle and want to test it safely, commercial racing tracks and driving experience centres are the legitimate options available to the public.

Why hypercar manufacturers need private test tracks

A hypercar like those developed by Rimac Automobili produces over 1,000 horsepower and can reach speeds that exceed 200 mph. Testing a vehicle at those performance levels on a public road is illegal and dangerous. A private track allows engineers to push the vehicle to its limits, measure how it behaves under extreme conditions, and collect data that informs design decisions—all without risk to public safety.

The Velika Gorica facility serves this purpose for Rimac's development work. Engineers use it to validate that the vehicle's braking system can handle repeated high-speed stops, that the suspension geometry works as designed across a range of speeds, and that electrical systems perform reliably under the thermal and mechanical stress of hard driving. This testing is essential before a hypercar ever reaches a customer's hands.

Private test tracks also allow manufacturers to conduct testing in controlled conditions where variables like weather, traffic, and road surface are known. This repeatability is crucial for engineering work—if you change one component and want to know whether it improved performance, you need to test it on the same track, in the same conditions, with the same driver inputs.

What testing actually happens at a hypercar facility

At a facility like Bugatti Rimac's, testing includes performance validation (measuring acceleration, top speed, and braking distances), durability testing (running the vehicle repeatedly to identify components that wear or fail prematurely), and safety system validation (confirming that stability control, traction control, and other safety systems work correctly across the vehicle's performance envelope).

Engineers also use test tracks to tune the vehicle's handling characteristics. A hypercar's suspension, steering response, and weight distribution all affect how it behaves at high speed. Drivers provide feedback on how the car feels, and engineers adjust components or software to improve the experience. This iterative process—drive, measure, adjust, drive again—happens on a private track where the same conditions can be replicated.

Thermal testing is another critical function. High-performance vehicles generate enormous heat in the brakes, motor, battery, and transmission. Engineers need to confirm that cooling systems can manage that heat during sustained hard driving, and that no component reaches a temperature that would cause failure or safety issues. This testing requires extended high-speed runs that are only possible on a dedicated track.

The difference between private test facilities and public racing tracks

A private manufacturer's test track differs from a commercial racing circuit in purpose and access. A racing track like a Formula 1 circuit is designed for competitive events and may host driving experiences where the public can rent track time. A private test facility is closed to the public and exists only for the manufacturer's engineering work.

Private test tracks are often smaller and more specialized than racing circuits. They may include straightaways for top-speed testing, handling courses with tight corners and elevation changes, braking zones with specific surface conditions, and areas designed to test specific vehicle systems. The Velika Gorica facility is built to Rimac's specifications for the vehicles they develop.

Access to a private test track is restricted to authorized personnel—engineers, test drivers, and company staff. If you want to test a high-performance vehicle yourself, you will need to use a commercial racing track that offers public track days or driving experiences. These facilities charge a fee and require you to sign liability waivers, but they are the legitimate option for owners who want to drive their cars at speed in a controlled environment.

How test data from private facilities informs vehicle design

Data collected during testing at a private track feeds directly into engineering decisions. Accelerometers measure how much lateral force the vehicle experiences in corners. Thermal sensors track temperatures in critical components. Cameras record the vehicle's behavior from multiple angles. Onboard computers log thousands of data points per second—engine load, battery state of charge, motor temperature, suspension position, brake pressure, and more.

Engineers analyze this data to identify problems before they reach customers. If a component runs hotter than expected, they may redesign it, change the material, or improve the cooling system. If the vehicle exhibits unwanted behavior in a particular maneuver, they adjust the suspension geometry or tune the stability control software. This process of test-measure-adjust is how manufacturers may support that the vehicles they sell are safe, reliable, and perform as promised.

For a hypercar manufacturer like Rimac, this testing is especially critical because the vehicles are expensive, produced in small numbers, and operate at the edge of what current technology can achieve. A single design flaw could result in a safety issue or a component failure that damages the manufacturer's reputation. Private test facilities allow them to catch and fix problems before customers ever encounter them.

What you should know if you own a high-performance vehicle

If you own a sports car, performance sedan, or any vehicle you want to drive at its limits, do not attempt to do so on public roads. High-speed driving on public roads is illegal, endangers other drivers, and can result in criminal charges. Instead, look for commercial racing tracks in your area that offer track days or driving experiences.

Track days typically cost between $200 and $500 for a day of driving, depending on the facility and the length of the session. You bring your own car or rent one at the track, and you drive under the supervision of track officials. Some facilities offer instruction from professional drivers. This is the legal, safe way to experience your vehicle's performance capabilities.

Before you take your car to a track, have it inspected by a mechanic who knows performance vehicles. Check that your brakes are in good condition, your tires have adequate tread, your fluid levels are correct, and there are no obvious mechanical problems. Bring extra coolant and brake fluid, because high-speed driving generates heat. Wear a helmet—most tracks require it, and it is the single most important piece of safety equipment you can use.

Understanding the role of testing in vehicle reliability

When a manufacturer like Rimac tests a vehicle extensively before release, they are not just validating performance—they are building reliability into the design. A component that works fine in normal driving might fail under the stress of repeated high-speed use. By testing at those extremes, engineers identify and fix problems that would otherwise show up as warranty claims or, worse, safety issues.

This is why vehicles from established manufacturers tend to be more reliable than prototypes or vehicles from companies that skip rigorous testing. The testing process is expensive and time-consuming, but it is the only way to catch problems before they affect customers. When you buy a vehicle from a manufacturer with a reputation for quality, you are partly paying for the testing that went into it.

For owners, this means that the maintenance schedules and service intervals recommended in your owner's manual are based on testing data. If the manual says to change your oil every 5,000 miles, that interval was determined through testing that showed how long the oil remains effective under the vehicle's operating conditions. Following these intervals helps may support that your vehicle remains as reliable as the testing predicted.

Frequently Asked Questions

Can I visit the Bugatti Rimac test track in Velika Gorica?

No. The facility is a private testing centre for Rimac Automobili's internal use only. It is not open to the public, and there are no visitor tours or driving experiences available. If you want to experience high-speed driving, commercial racing tracks in your region offer track days and driving experiences.

What is the difference between a test track and a racing circuit?

A test track is a private facility used by a manufacturer for engineering work and vehicle development. A racing circuit is designed for competitive events and often offers public track days. Racing circuits are open to drivers who pay a fee; test tracks are closed to everyone except the manufacturer's staff.

Why do hypercar manufacturers need their own test facilities?

Hypercars operate at speeds and power levels that exceed what public roads or standard racing tracks can safely accommodate. Private facilities allow manufacturers to test at extreme performance levels, collect detailed engineering data, and validate safety systems without risk to the public.

How much does it cost to drive on a commercial racing track?

Track day fees vary by facility and location, typically ranging from $200 to $500 for a day of driving. Some tracks offer instruction, and some allow you to bring your own car while others require you to rent one at the track. Contact your local racing facility for current pricing and availability.

What should I check on my car before taking it to a track?

Have a mechanic inspect your brakes, tires, suspension, and fluid levels. Bring extra coolant and brake fluid. Wear a helmet—most tracks require it. Check your owner's manual for any specific pre-track recommendations, and make sure your insurance covers track driving if you are bringing your own vehicle.