What a Jon Boat Is and Why People Build Them
A jon boat is a flat-bottomed aluminum or wooden boat, usually 14 to 20 feet long, designed for shallow water and calm conditions. The name comes from "john boat," though the origin is unclear. Jon boats are popular for fishing, hunting, and moving through marshes and rivers because they draw very little water, handle rough handling, and cost far less to build than to buy finished.
Most people who build jon boats do so because a used one costs $3,000 to $8,000 and a new one costs $10,000 or more. Building one yourself can cost $1,500 to $4,000 depending on materials and whether you already own tools. The build takes 40 to 80 hours of work spread over several weeks or months.
This guide covers the real steps: choosing a design, gathering materials, building the hull, and finishing the boat so it floats and runs. It does not cover engine installation, electrical systems, or trailering — those are separate skills that deserve their own resources.
Key Takeaways
- Jon boats are built from either aluminum sheet or plywood, and aluminum requires welding equipment while plywood requires only basic carpentry tools.
- You need a detailed plan — either purchased from a designer or downloaded free from boatbuilding sites — before you buy a single piece of material.
- The hull is the frame and bottom; the sides and deck come after, and the whole structure must be sealed and tested for leaks before you add an engine.
- Building in a garage or workshop requires 12 by 20 feet of clear space minimum, and you will need to move the boat outside or to a launch before it is finished.
Aluminum vs. Plywood: Which Material to Choose
Aluminum boats are lighter, more durable, and require no painting, but they demand a MIG or TIG welder, a metal brake for bending, and experience reading welding plans. If you do not already own welding equipment, buying or renting it adds $500 to $2,000 to your cost. Aluminum also requires you to understand how to prevent galvanic corrosion where different metals meet.
Plywood boats use marine-grade plywood (usually 3/8 or 1/2 inch thick) over a wooden frame. They are easier to build with hand tools, cheaper to start, and forgiving of small mistakes. The trade-off is that plywood needs fiberglass tape and epoxy resin on all seams, then paint or sealant on the whole hull. Plywood boats also absorb water if the seal fails, so maintenance is ongoing.
If you own a welder and metal tools, aluminum is the faster path. If you are starting from scratch with hand tools, plywood is more realistic. Most first-time builders choose plywood.
Finding and Using a Boat Plan
Do not start building without a plan. A plan tells you the exact dimensions of every piece, how pieces connect, where to drill holes, and how much material you need. Building from a guess or a photo will waste money and time.
Plans come from three sources: designers who sell them ($50 to $200), free plans on boatbuilding forums and sites like WoodenBoat.com or BoatDesigns.com, and plans in books on jon boat building. Free plans are often tested by many builders and are usually reliable, but they may lack detail on finishing steps. Paid plans from established designers include more notes and customer support.
Once you have a plan, print it or view it on a tablet while you work. Read the entire plan before you buy materials — it will tell you the wood species, plywood grade, fastener sizes, and resin type you need. Many builders miss this step and buy the wrong materials.
Gathering Materials and Tools
Your material list depends on your plan and your choice of aluminum or plywood. For a 16-foot plywood jon boat, expect to buy 4 to 6 sheets of marine plywood, 100 to 200 board feet of lumber for the frame (usually pine or oak), fiberglass tape, epoxy resin, paint or sealant, and stainless steel fasteners. Total material cost is usually $1,500 to $2,500.
Tools you will need include a circular saw or table saw, a drill, a jigsaw, a sander, clamps (many clamps), a tape measure, a square, and a level. If you are using plywood, you also need a brush or roller for epoxy and a paintbrush. For aluminum, you need a welder, a metal brake, and a grinder. Most builders borrow or rent specialized tools rather than buy them.
Buy materials from marine suppliers, not hardware stores. Marine plywood is different from construction plywood — it has fewer voids and better glue. Marine epoxy is different from general-purpose epoxy — it cures underwater and bonds wood to fiberglass. Using the wrong product will fail.
Building the Frame and Hull Bottom
The frame is the skeleton. It usually consists of a keel (the center spine), ribs or stringers (the cross-pieces), and a stem (the front support). You cut these from lumber according to your plan, then assemble them on a flat, level surface called a strongback or building frame.
Once the frame is assembled and braced square, you attach the hull bottom. For plywood, you cut sheets to size, fit them over the frame, and fasten them with screws or nails. For aluminum, you bend and weld sheets to the frame. This is the longest single step — expect 20 to 30 hours of work.
After the bottom is on, you seal all seams. For plywood, you tape the seams with fiberglass tape and epoxy resin, then sand smooth. For aluminum, you weld the seams and grind them. This step determines whether your boat leaks, so do not rush it.
Adding Sides, Deck, and Finishing
Once the bottom is sealed, you attach the sides (called planking or strakes). These are usually plywood sheets or aluminum panels fastened to the frame with screws or rivets. You build up from the bottom, one row at a time, checking that everything is level and square as you go.
The deck comes next — usually a plywood platform at the front and back, with an open center for the motor and fuel tank. The deck is where you stand, so it must be strong and slip-resistant. Most builders add a non-skid coating or texture to the deck surface.
Finishing means sealing every surface against water. For plywood, this means paint, sealant, or epoxy coating on the hull and deck. For aluminum, it means paint or anodizing. You also install a drain plug (so water can leave), a bailer or bilge pump (to remove water that gets in), and flotation foam or air chambers (so the boat floats even if full of water).
Testing and Launch
Before you put an engine on the boat, you need to know it floats level and does not leak. Launch it in shallow water — a pond, a calm river, or a boat ramp — and let it sit for 30 minutes. Check inside for water. If the bilge is dry, the hull is sound. If water is coming in, you have a leak to find and seal.
Once the hull is proven, you can add the engine, fuel tank, and controls. Engine installation is a separate skill involving mounts, fuel lines, and electrical connections. Many builders take their finished hull to a marine mechanic for this step rather than do it themselves.
After the engine is installed and tested, you can register the boat with your state's fish and wildlife or boating authority. Registration requires proof of ownership, a hull identification number (HIN), and proof of liability insurance. Requirements vary by state, so contact your local boating authority before launch.
Frequently Asked Questions
How long does it actually take to build a jon boat?
Most builders spend 40 to 80 hours of active work over 2 to 4 months. This includes planning, cutting, assembly, sealing, and finishing. The time varies with your skill, the size of the boat, and how much time you can spend each week. Plywood boats are usually faster than aluminum boats.
Can I build a jon boat in a garage?
Yes, but you need at least 12 by 20 feet of clear floor space. The boat will be too large to move through a standard garage door once the sides are on, so plan to build it in the garage and move it outside or to a launch ramp before finishing. Some builders build in a driveway or a rented workshop instead.
What is the difference between marine plywood and regular plywood?
Marine plywood has fewer voids (air gaps) in the layers, better waterproof glue, and tighter tolerances. Regular plywood will absorb water and delaminate (the layers will separate). For a boat, marine plywood is not optional — it is the only plywood that will last.
Do I need a welder to build a jon boat?
Only if you choose aluminum. Plywood jon boats need no welding — just epoxy, fiberglass tape, and fasteners. If you do not own a welder and do not want to learn, plywood is the right choice.
What happens if my boat leaks after I launch it?
Small leaks can often be sealed from the inside with epoxy putty or sealant while the boat is in the water. Larger leaks require hauling the boat out, drying it, and resealing the seam from the outside. This is why testing in shallow water before you rely on the boat is important.