What you need to know before installing camper AC
Installing air conditioning in a camper means choosing between a rooftop unit (the most common option), an under-bed system, or a portable window unit — and each choice depends on your camper's roof strength, available power, and how much cooling you actually need. A rooftop unit costs $1,500 to $4,000 installed and draws significant power from your battery or generator. An under-bed system runs $2,000 to $5,000 but takes up living space. A portable window unit costs $300 to $800 and works only if your camper has a window you can seal around it.
The real constraint is power. Most camper AC units draw 13 to 15 amps when running, which means you need either shore power (plugged into a campground pedestal), a generator rated for at least 5,000 watts, or a battery bank large enough to run the unit for several hours. Many campers with standard 30-amp service cannot run a rooftop AC unit and other appliances at the same time without tripping the breaker.
Key Takeaways
- Rooftop AC units are the standard choice for campers and cost $1,500 to $4,000 installed, but require either shore power or a large generator.
- Your camper's electrical system must support the AC unit's power draw — most units need 13 to 15 amps, which limits what else you can run simultaneously.
- Installation involves cutting a hole in the roof, running ductwork or vents, wiring the unit to your electrical panel, and sealing everything against leaks.
- A professional installation takes one to two days and includes testing the system and ensuring the roof is properly sealed.
- DIY installation is possible if you have electrical and carpentry skills, but mistakes in roof sealing or wiring can cause water damage or electrical problems.
Rooftop AC units: the standard choice for most campers
A rooftop unit sits on top of your camper and pulls air through a vent, cools it, and pushes it back into the living space through ductwork or a drop-down ceiling panel. The most common brands are Dometic, Coleman, and Atwood. These units come in two types: ducted systems that distribute cool air through multiple vents, and non-ducted systems that cool a single area. Ducted systems cost more but cool the camper more evenly.
The unit itself weighs 80 to 120 pounds and sits in a frame bolted to the roof. Installation requires cutting a hole roughly 14 by 14 inches through the roof, installing a flange that seals against the roof material, running electrical wiring to your breaker panel, and connecting ductwork inside. If your camper has a metal roof, the job is straightforward. If it has a rubber roof (EPDM), the installer must seal the cut carefully to prevent leaks — this is where most DIY installations fail.
Electrical requirements and power draw
A typical rooftop AC unit draws 13 to 15 amps at 120 volts when the compressor is running. This means you need either a 30-amp shore power connection at a campground, a 50-amp connection (which gives you more headroom), or a generator rated for at least 5,000 watts continuous output. Many portable generators are rated in peak watts but deliver far less continuous power — check the continuous wattage, not the peak.
If you want to run AC while boondocking (camping without shore power), you need a generator. A 5,000-watt generator costs $500 to $1,500 and burns roughly 0.5 gallons of fuel per hour at full load. Running it 8 hours a day in hot weather means 4 gallons daily. Some campers install a second battery bank and a large inverter instead, but a 400-amp lithium battery bank capable of running AC for a few hours costs $3,000 to $6,000.
Professional installation versus DIY
A professional RV technician charges $500 to $1,500 in labor to install a rooftop unit, plus the cost of the unit itself. The job takes one to two days. The technician will cut the roof hole, install the flange and seal it with RV-grade caulk, run the wiring to your breaker panel (or add a new circuit if needed), test the unit, and verify that the roof does not leak. Many shops offer a warranty on the installation.
DIY installation is possible if you have carpentry and electrical skills. You will need a jigsaw or reciprocating saw to cut the roof hole, a drill, wire strippers, a voltage tester, and RV-grade sealant. The biggest risk is improper roof sealing — water can seep in around the flange and cause rot inside the walls. The second risk is wiring: if you run the wrong gauge wire or connect it to the wrong breaker, you can overheat the wire or damage the unit. If you are not confident in either step, hire a professional.
Under-bed and portable AC alternatives
An under-bed AC system is a compact unit that mounts underneath the camper and cools the space above it. Brands like Truma and Webasto make these systems. They cost $2,000 to $5,000 installed and draw less power than a rooftop unit (around 8 to 10 amps). The downside is that they take up storage space underneath the camper and work best in smaller spaces like truck campers or van conversions.
A portable window AC unit is the cheapest option at $300 to $800. You mount it in a window frame and seal the gaps with foam or fabric. These units draw 10 to 12 amps and cool only the room they are in. They work well for campers that spend most of their time parked in one spot, but they are not practical for travel because you have to remove and reinstall them at each stop.
Ductwork, thermostat, and control options
Once the rooftop unit is installed, you need to decide how to distribute the cool air. A ducted system runs flexible aluminum or plastic ducts from the unit down through the camper's walls and ceiling to vents in different rooms. This costs an extra $300 to $800 in materials and labor but cools the camper more evenly. A non-ducted system straightforward blows air down through a single vent, which works for small campers but leaves hot spots in larger ones.
Most rooftop units come with a wall-mounted thermostat that lets you set a target temperature. The unit cycles on and off to maintain that temperature. Some newer units have digital controls and can be operated remotely via a smartphone app. A basic thermostat costs $50 to $150; a smart thermostat costs $200 to $400. The thermostat location matters — if it is in a hot spot or in direct sunlight, it will trigger the AC to run more often than necessary.
Maintenance and seasonal use
A rooftop AC unit needs annual maintenance: cleaning or replacing the air filter, checking the refrigerant level, and inspecting the roof seal for cracks or gaps. The filter usually costs $20 to $50 and takes 10 minutes to replace. If the unit is not cooling as well as it used to, it may be low on refrigerant — a technician can recharge it for $150 to $300.
Before winter storage, run the unit for a few minutes to circulate the oil in the compressor, then cover the rooftop unit with a protective cap to keep out debris and moisture. In spring, remove the cap, clean the filter, and test the unit before you need it. If you store the camper in a climate-controlled facility, you can skip the cap.
Frequently Asked Questions
Can I install a rooftop AC unit on a camper with a rubber roof?
Yes, but the installation is more critical. The installer must cut the hole carefully, install the flange properly, and seal it with RV-grade caulk rated for rubber roofs. If the seal fails, water will seep into the walls and cause rot. This is why professional installation is recommended for rubber roofs.
Will a rooftop AC unit work if I am boondocking?
Only if you have a generator. A typical rooftop unit draws 13 to 15 amps, which requires a 5,000-watt generator. Running it 8 hours a day burns about 4 gallons of fuel. Some campers use a large battery bank and inverter instead, but that costs $3,000 to $6,000.
How much does a rooftop AC unit cost in total?
The unit itself costs $1,200 to $2,500, and professional installation adds $500 to $1,500. Total cost is typically $1,700 to $4,000. Under-bed systems cost more ($2,000 to $5,000), while portable window units cost less ($300 to $800).
Can I run my rooftop AC and other appliances at the same time?
It depends on your electrical service. With 30-amp shore power, you have about 3,600 watts available. A rooftop AC unit uses roughly 1,800 watts, leaving 1,800 watts for everything else. With 50-amp service, you have 12,000 watts, so running AC and other appliances is not a problem.
How long does a rooftop AC unit last?
Most units last 10 to 15 years with regular maintenance. The compressor is the most expensive component to replace ($800 to $1,500). Keeping the filter clean and the refrigerant level correct extends the unit's life.