What a blown fuse looks like and where to find it
A blown fuse is a small cylindrical or blade-shaped component that has burned out inside, stopping power to whatever it protected — usually a specific light, outlet, or system. You'll find your car's fuses in one or more fuse boxes, typically located under the dashboard on the driver's side, under the hood, or both. Your owner's manual shows the exact location and includes a diagram labeling which fuse controls which system.
To check if a fuse is blown, remove it and look inside. A blown fuse will have a broken wire or blackened interior visible through the clear plastic or glass casing. A good fuse shows an intact wire running across the middle. Some cars use blade fuses (flat, rectangular, color-coded by amperage) and others use cylindrical fuses; your manual tells you which type yours uses.
Before you replace anything, turn off the engine and the ignition. This prevents electrical damage and keeps you safe while working near the fuse box.
Key Takeaways
- A blown fuse has a broken or blackened wire inside and stops power to one specific system or light.
- Your owner's manual shows the fuse box location and a diagram identifying which fuse controls which component.
- Always replace a blown fuse with one rated for the same amperage — using a higher-rated fuse can damage wiring or cause a fire.
- If a fuse blows again when ready after replacement, the underlying electrical problem needs diagnosis by a mechanic.
- Fuses cost a few dollars and take five minutes to swap; no special tools are needed.
Removing the old fuse and installing the new one
Most fuse boxes have a small plastic puller tool clipped inside the lid or mounted on the box itself. Use this tool to grip the fuse and pull it straight out. If there's no puller, needle-nose pliers or tweezers work, but grip the fuse body itself, not the metal terminals. Pull firmly and straight — fuses sit snugly and require real pressure to remove.
Once the fuse is out, note its amperage rating. This number is printed on the fuse body and also listed in your manual's fuse diagram. The amperage tells you how much current that circuit is designed to handle. Common ratings are 5A, 10A, 15A, 20A, and 30A; the higher the number, the more current it allows.
Buy a replacement fuse with the exact same amperage rating. Using a higher-rated fuse defeats the fuse's purpose — it won't blow when the circuit overloads, and the wiring can overheat and catch fire. Using a lower-rated fuse causes it to blow repeatedly even during normal operation. Insert the new fuse into the empty slot, pushing straight in until it clicks or seats fully. The fuse should be flush with the box, not sticking out.
Testing the repair and when to stop troubleshooting yourself
Turn the ignition back on and test the system the fuse controlled. If it works — the light comes on, the outlet powers a phone charger, the window motor runs — the job is done. Turn everything off and close the fuse box cover.
If the new fuse blows when ready or within a few minutes, stop replacing it. A fuse that blows right away signals an underlying electrical fault: a short circuit, a component drawing too much current, or damaged wiring. Replacing fuses repeatedly without fixing the root cause wastes money and risks fire. Take the car to a mechanic who can test the circuit with a multimeter and find what's actually wrong.
If the fuse holds but the system still doesn't work, the fuse may not have been the problem. Check that you replaced the correct fuse by cross-referencing the diagram. If you did, the issue lies elsewhere in that circuit — a burned-out bulb, a failed switch, or a broken wire — and requires diagnosis beyond fuse replacement.
Blade fuses versus cylindrical fuses
Most cars made in the last 20 years use blade fuses, which are flat and rectangular with two metal prongs on the bottom. They're color-coded by amperage: brown for 7.5A, red for 10A, yellow for 20A, blue for 30A, and so on. The color makes it straightforward to grab the right replacement at an auto parts store without hunting for the number.
Older cars and some specialty circuits use cylindrical fuses, which look like small metal tubes with caps on each end. These are less common now but work the same way — pull out the old one, insert the new one with matching amperage. Both types cost just a few dollars, and most auto parts stores stock both.
Your owner's manual or the diagram inside the fuse box lid will show which type your car uses. If you're unsure, bring the blown fuse to an auto parts store and match it to a replacement.
Where to buy replacement fuses and what to keep on hand
Auto parts stores, big-box retailers like Walmart and Target, and gas stations all stock fuses. A single fuse costs between $1 and $3. Many people buy a small assortment pack containing several common amperage ratings — these cost $5 to $10 and let you handle most common fuse failures without a second trip to the store.
Keeping a few spare fuses in your glove box is practical. Include the amperage ratings most commonly used in your car — your manual's fuse diagram shows which circuits blow most often. If you travel long distances or have an older car, a small assortment pack is cheap insurance against being stranded by a blown fuse in an unfamiliar place.
Why fuses blow and what it means
A fuse blows when the circuit it protects draws more current than it's rated for. This can happen because a component is failing and drawing excessive power, a wire is damaged and creating a short circuit, or too many high-draw devices are running on the same circuit at once. A single blown fuse is usually just bad luck — a component failed, the fuse did its job, and replacing it solves the problem.
If the same fuse blows repeatedly, or if multiple fuses blow in a short time, the car has an electrical fault that needs professional diagnosis. Mechanics use a multimeter to measure current draw on each circuit and identify which component or wire is causing the problem. Ignoring repeated fuse failures risks damage to the electrical system and potential fire.
Frequently Asked Questions
Can I use a higher-amperage fuse if I don't have the right one?
No. A higher-rated fuse won't blow when it should, and the wiring behind it can overheat and catch fire. Always use the exact amperage listed in your manual or on the fuse box diagram. If you don't have the right fuse, wait to buy one rather than improvising.
What if I can't find the fuse box?
Check your owner's manual first — it shows the location with a diagram. Most cars have a fuse box under the dashboard on the driver's side and another under the hood. If you still can't locate it, search online for "[your car year, make, model] fuse box location" or ask at an auto parts store.
Is it safe to replace a fuse myself?
Yes. Fuses carry low voltage and you're not working with live wires. Always turn off the engine and ignition first, and avoid touching the metal terminals inside the fuse box. If you're uncomfortable working near electrical components, a mechanic can replace a fuse in minutes for a small fee.
What does the color of a blade fuse mean?
Color indicates amperage rating. Brown is 7.5A, red is 10A, yellow is 20A, and blue is 30A. The color makes it straightforward to grab the right replacement, but always verify the number printed on the fuse itself to be certain.
Can a fuse blow while I'm driving?
Yes. You'll notice the protected system stops working — a light goes out, the radio cuts off, or a window won't move. If it's safe to pull over, you can replace the fuse and continue. If the fuse blows again when ready, don't keep replacing it; have the car towed or driven to a mechanic to find the underlying problem.