When and why you need to replace a mirror

A broken or damaged mirror is a safety issue, not a cosmetic one. Your side mirrors let you see traffic in your blind spots, and your rearview mirror shows what is behind you. If either is cracked, missing, or won't stay in position, you lose that sight line—and that increases your risk of hitting another vehicle or missing a hazard.

Mirrors get damaged in several ways: impact from another car, a parking lot collision, weather damage, or a fall against the mirror while opening a door. Some damage is obvious—the glass is shattered or the mirror housing is cracked. Other times the mirror glass has come loose inside the housing but the frame looks fine from the outside. Either way, the mirror needs to be fixed before you drive regularly.

The good news is that mirror replacement is one of the more straightforward repairs you can do yourself or have done quickly at a shop. The cost and difficulty depend on which mirror, what kind of damage, and whether your car has power-adjustable or heated mirrors.

Key Takeaways

  • A broken mirror is a safety problem because it removes a sight line you depend on to avoid collisions.
  • You can often replace just the glass insert if the housing is intact, which costs less than replacing the entire mirror assembly.
  • Power mirrors and heated mirrors take longer to replace because the wiring has to be disconnected and reconnected correctly.
  • A manual side mirror replacement takes 15 to 30 minutes; power mirrors take 30 to 60 minutes; a rearview mirror can be done in 10 minutes if it is a straightforward clip-on type.
  • If you are not comfortable working with electrical connectors or removing trim panels, a shop can do the job for $150 to $400 depending on the mirror type.

Types of mirror damage and repair options

Not every mirror problem requires a full replacement. If the glass is cracked but the housing and frame are solid, you can often buy a replacement glass insert and swap it in. This costs $30 to $80 and takes 10 to 15 minutes. The glass slides or clips into the existing housing, and you are done.

If the housing is cracked, bent, or the mirror will not stay in position, you need to replace the entire mirror assembly. This means removing the old mirror completely and bolting or clipping a new one in place. For manual mirrors, this is straightforward. For power mirrors with heating elements, you also have to disconnect the wiring harness from the back of the mirror before you remove it, and reconnect it to the new mirror.

Rearview mirrors mounted on the windshield are usually held by a single clip or adhesive pad. If the clip breaks or the adhesive fails, you can buy a replacement mirror and snap it onto the existing mount, or buy a new mount and adhesive kit if the old one is damaged. This is the fastest repair of all.

Tools and parts you will need

For a glass-only replacement, you need the replacement glass insert (specific to your car model and mirror type) and a plastic trim removal tool to pry the old glass out without scratching the housing.

For a full mirror assembly replacement, gather a socket set or wrench set (usually 10mm or 13mm bolts hold the mirror to the door), a plastic trim removal tool to pop off any trim panels covering the bolts, and the replacement mirror assembly. If your mirror is power-adjustable or heated, you will also need a small flashlight to see the electrical connector at the back of the mirror, and you may need a small screwdriver to release the connector clip.

For a rearview mirror, you need the replacement mirror and possibly an adhesive kit if you are reattaching to the windshield. Some replacement mirrors come with the adhesive already applied.

Before you buy anything, check your vehicle's service manual or search online for your exact year, make, and model to confirm which bolts hold your mirror, whether it is power or manual, and whether there are any trim panels you have to remove first. This step saves you from buying the wrong part or discovering halfway through that you need a tool you do not have.

How to replace a side mirror yourself

For a manual mirror: Open the door and look at the back of the mirror housing. You will see two or three bolts holding it to the door frame. Use your socket set to remove these bolts and set them aside. Gently pull the mirror away from the door. If there is a trim panel covering the bolts, use your plastic trim tool to pop it off first. Once the mirror is off, disconnect any wiring if there is a light in the mirror housing. Install the new mirror by reversing the steps: position it, thread the bolts by hand first so they do not cross-thread, then tighten them with your socket set. Reconnect any wiring.

For a power mirror: The removal is the same, but before you pull the mirror away from the door, reach behind it and locate the electrical connector. It is usually a plastic clip-on connector with two or three wires. Gently squeeze or press the release tab on the connector and pull it straight out. Do not yank on the wires themselves. Install the new mirror, thread and tighten the bolts, then push the electrical connector onto the new mirror's connector until it clicks. Test the mirror adjustment controls to make sure the power works before you close the door.

The entire job usually takes 30 to 60 minutes for a power mirror and 15 to 30 minutes for a manual mirror, depending on how tight the bolts are and whether trim panels are in the way.

How to replace a rearview mirror

Rearview mirrors mounted on the windshield are held by either a clip that wraps around a metal post, or by an adhesive pad bonded to the glass. If the clip is broken, you can buy a replacement mirror with a new clip and snap it onto the existing post. If the adhesive has failed, you have two options: buy a replacement mirror with fresh adhesive already applied, or buy an adhesive kit and reattach the old mirror to the windshield.

To remove a clip-mounted mirror, straightforward unclip it from the post. To remove an adhesive-mounted mirror, gently rock it side to side and pull straight toward you. It may take steady pressure to break the bond. Once it is off, clean any old adhesive residue from the windshield with rubbing alcohol and let it dry completely.

To install a new clip-mounted mirror, align the clip over the post and press down until it seats. To install an adhesive-mounted mirror, follow the kit instructions—usually you explore the adhesive to the back of the mirror, position it on the windshield, and hold it in place for the time specified (often 30 seconds to a minute). Do not adjust the mirror or move it until the adhesive has cured, which can take several hours.

When to take your car to a shop

Mirror replacement is a good DIY job if you are comfortable using basic hand tools and disconnecting electrical connectors. But if you are unsure about any step, or if your mirror is part of a complex assembly with cameras or sensors built in, a shop can do it faster and with a warranty on the work.

Shops typically charge $150 to $250 for a manual side mirror replacement, $200 to $350 for a power mirror, and $100 to $200 for a rearview mirror. These prices vary by location and shop, and they do not include the cost of the mirror itself. Some shops will install a mirror you buy elsewhere, but many prefer to sell you the part so they can may provide compatibility.

If your mirror has integrated features like a blind-spot camera, lane-change indicator light, or heating element, a shop is the safer choice. These features require correct wiring and calibration, and a mistake can disable a safety system.

What to do if your mirror is stuck or won't adjust

Sometimes a mirror is not broken but will not stay in position, or the power adjustment controls do not work. Before you replace it, try a few quick fixes.

If a manual mirror keeps moving out of position, the mounting bolts may be loose. Open the door, reach behind the mirror, and try tightening the bolts with your socket set. Do not over-tighten—you only need them snug enough that the mirror does not shift when you bump it. If the bolts are already tight and the mirror still moves, the mounting bracket may be bent or cracked, and the mirror assembly will need to be replaced.

If a power mirror does not respond to the adjustment controls, the problem is usually a loose electrical connector or a blown fuse. Check your vehicle's fuse box (the location is in your owner's manual) and look for the fuse labeled for the mirror or power windows. If it is blown, replace it with a fuse of the same amperage. If the fuse is good, reach behind the mirror and make sure the electrical connector is fully seated. If it is loose, push it in until it clicks. If the fuse and connector are both fine, the motor inside the mirror may have failed, and the mirror will need to be replaced.

Frequently Asked Questions

Can I drive with a broken mirror?

Legally, it depends on your state. Most states require both side mirrors to be intact and functional. A broken rearview mirror is usually illegal to drive with. Even if your state allows it, a broken mirror removes a critical sight line and increases your collision risk. Repair or replace it before you drive regularly.

How long does a mirror replacement take at a shop?

A manual side mirror usually takes 30 to 45 minutes. A power mirror takes 45 minutes to an hour. A rearview mirror takes 15 to 30 minutes. These times assume the shop has the correct mirror in stock and no complications arise.

What if I buy the wrong mirror for my car?

Check the part number on your old mirror or in your owner's manual before you order. Most online retailers and auto parts stores let you search by year, make, and model to find the exact mirror. If you do order the wrong one, most retailers accept returns within 30 days.

Do I need to reprogram a new mirror?

Most mirrors do not need programming. Manual mirrors and basic power mirrors work as soon as they are bolted in and wired. If your mirror has a blind-spot camera or other advanced feature, the shop may need to calibrate it, but this is usually done as part of the installation.

Is it cheaper to replace just the glass or the whole mirror?

If only the glass is cracked and the housing is intact, replacing the glass insert costs $30 to $80 and takes 10 minutes. Replacing the entire assembly costs $100 to $300 for the part, plus labor if you use a shop. Glass-only replacement is the cheaper option if it is available for your mirror type.