The check emission system light is your Acura telling you that something in the emissions control system has failed a self-test
When this light comes on in your Acura, the engine computer has detected a fault in one of the systems designed to reduce exhaust pollution. This is not a check engine light—it is a separate warning specific to emissions equipment. The light may be steady or blinking, and either way, it means the car has stored a diagnostic trouble code that a technician can read with a scanner.
The emissions system includes the catalytic converter, oxygen sensors, the evaporative emissions system (which captures fuel vapors), and the exhaust gas recirculation valve. Any of these can trigger the warning. The car will usually still run and drive, but you should not ignore it. Driving with a failed emissions component can damage the catalytic converter—the most expensive part to replace—and will cause your car to fail an emissions test if your state or county requires one.
Key Takeaways
- The check emission system light means the engine computer found a fault in pollution control equipment, not necessarily an engine problem.
- A technician must read the diagnostic code with a scanner to know which part has failed; guessing which component is broken wastes time and money.
- Driving with the light on risks damage to the catalytic converter, which costs $800 to $2,000 or more to replace depending on your Acura model.
- Some Acura models allow you to clear the code yourself by turning the key on and off a specific number of times, but this only hides the problem until the next self-test cycle.
Why Acura has a separate emissions warning light
Acura (Honda's luxury brand) uses the check emission system light to flag problems that are specifically about pollution control, separate from the general check engine light. This distinction matters because emissions faults often do not affect how the car runs day-to-day, so owners might not notice them otherwise. The light is Acura's way of saying: "This part is broken, and you need to fix it before your next inspection or before it breaks something else."
The emissions system is monitored continuously while you drive. The engine computer runs self-tests on the oxygen sensors, the catalytic converter, the fuel vapor system, and the exhaust gas recirculation system. If any test fails twice in a row across two separate driving cycles, the light turns on and a code is stored in the computer's memory. Some codes are permanent and require a technician to clear them after the repair is made.
Common reasons the light comes on in Acura models
A loose or damaged gas cap is the most common trigger, especially on older Acuras. The fuel system is sealed, and if air can leak in through the cap, the computer detects a pressure drop and logs a code. Before you do anything else, check that the cap is tight and not cracked. If it is damaged, replace it—a new cap costs $10 to $25.
Oxygen sensors fail more often than other emissions parts. These sensors tell the engine computer how much unburned fuel is in the exhaust so it can adjust the fuel mixture. When one fails, the computer cannot make that adjustment, and the light comes on. An oxygen sensor replacement typically costs $150 to $400 per sensor depending on which one has failed and which Acura model you own. Some Acuras have two or four oxygen sensors.
The catalytic converter can fail if it overheats or clogs. This usually happens because something else upstream—like a bad spark plug or a leaking fuel injector—is sending too much unburned fuel into the exhaust. The converter gets too hot and loses its ability to convert pollutants. Replacing a catalytic converter is expensive, $800 to $2,000 or more, so catching the real cause early matters. If you ignore the light and keep driving, you risk turning a $200 oxygen sensor repair into a $1,500 converter replacement.
The evaporative emissions system (EVAP) can develop a leak in a hose or the charcoal canister. This system captures fuel vapors from the tank so they do not escape into the air. A leak triggers the light. EVAP repairs range from $100 for a hose replacement to $400 or more if the canister itself is damaged.
How to read the diagnostic code yourself
You can borrow or buy an OBD-II scanner (On-Board Diagnostics, version 2) to read the code without paying a technician for a diagnosis. A basic scanner costs $25 to $100 and plugs into the diagnostic port under the steering column on the driver's side. Turn the key to the "on" position without starting the engine, plug in the scanner, and it will display the code—usually a letter followed by four numbers, like P0420 or P0133.
Once you have the code, you can search online for what it means. P0420 is a common one: "Catalyst System Efficiency Below Threshold," which usually means the catalytic converter is failing or an oxygen sensor is bad. P0133 means "Oxygen Sensor Circuit Slow Response," which points to a faulty oxygen sensor. Knowing the code narrows down what is wrong and helps you decide whether to tackle it yourself (if you have mechanical skill) or take it to a technician with a clear picture of what needs fixing.
Some Acura models allow you to clear the code by cycling the key on and off a set number of times—usually six times in rapid succession. This erases the code from memory, but it does not fix the underlying problem. The light will come back on after the next self-test cycle, usually within a few days of driving. Clearing the code yourself is only useful if you want to confirm that the light was a one-time glitch, not a persistent fault.
When to see a technician versus trying a fix yourself
If the code points to a loose gas cap or a straightforward hose, you can handle it. If it is an oxygen sensor and you have done sensor work before, you can replace it—the job takes 30 minutes to an hour and requires a sensor socket and a jack. If the code is about the catalytic converter or the EVAP system, or if you are not confident in your mechanical skills, take the car to a technician. Misdiagnosing the problem wastes money, and some repairs require specialized tools.
A technician will plug in a more advanced scanner than a basic OBD-II reader, which can show live sensor data and help pinpoint exactly which component has failed. They can also perform a visual inspection—checking hoses for cracks, looking for exhaust leaks, and confirming that all connections are tight. This takes 30 to 60 minutes and usually costs $75 to $150 for the diagnosis alone. Once they know what is wrong, you can decide whether to have them fix it or source the part yourself.
What happens if you ignore the light
In the short term, your Acura will run normally. The emissions system does not affect engine performance directly, so you might not feel any difference in how the car drives. However, ignoring the light has real consequences. If your state or county requires an emissions inspection, your car will fail the test and you cannot register it until the fault is repaired. Some states allow you to get a waiver if you have spent money on repairs, but the rules vary.
More importantly, the underlying problem often gets worse. A failing oxygen sensor can cause the engine to run too rich (too much fuel), which damages the catalytic converter over time. A clogged EVAP canister can cause fuel to back up into the charcoal filter, leading to a fuel smell inside or outside the car. Driving on a bad catalytic converter can cause it to overheat and crack internally, turning a $300 repair into a $1,500 one. The longer you wait, the more expensive the fix becomes.
Frequently Asked Questions
Is the check emission system light the same as the check engine light?
No. The check engine light is a general warning that the engine computer has found a fault in the engine, transmission, or emissions system. The check emission system light is specific to emissions equipment only. Some Acuras display both lights separately; others use one light for both purposes. Check your owner's manual to see which your model uses.
Can I drive my Acura with the check emission system light on?
Yes, the car will run and drive normally in most cases. However, you should have the code read and the problem diagnosed soon. Continuing to drive risks damage to expensive parts like the catalytic converter, and you will fail an emissions inspection if your area requires one.
Will the light go off on its own?
No. Once the computer stores a code, the light stays on until the fault is repaired and the code is cleared by a technician's scanner. Clearing the code yourself temporarily hides the problem, but the light will return after the next self-test cycle if the fault still exists.
How much does it cost to fix the check emission system light?
It depends on what is broken. A gas cap replacement costs $10 to $25. An oxygen sensor costs $150 to $400. An EVAP hose or canister repair costs $100 to $400. A catalytic converter replacement costs $800 to $2,000 or more. The only way to know is to read the diagnostic code and have a technician inspect the specific component.
Can I replace an oxygen sensor myself on my Acura?
Yes, if you have basic mechanical skills and the right tools. You need a sensor socket, a wrench, and a jack to safely lift the car. The sensor screws out of the exhaust manifold or exhaust pipe. The hardest part is usually accessing it without burning yourself on hot exhaust components. If you are not comfortable working under a hot car, have a technician do it.