Chevrolet key fob batteries typically last three to four years and cost $5 to $15 to replace
You can replace a Chevrolet key fob battery yourself in under five minutes using a coin and a new battery. The battery type depends on your fob model — most Chevrolet fobs use CR2032 or CR2035 batteries, both available at drugstores, supermarkets, and online retailers. You do not need to visit a dealer or pay a technician for this task.
The process is the same across most Chevrolet models from the last 15 years: pry open the fob case with a coin, remove the old battery, insert the new one with the positive side facing up, and snap the case closed. If your fob has a physical key blade inside, you may need to remove it first to access the battery compartment.
Key Takeaways
- Most Chevrolet key fobs use CR2032 or CR2035 batteries, which you can buy at any pharmacy or grocery store for under $10.
- You can open the fob case with a flat coin — a dime or penny works — by inserting it into the slot along the seam and twisting gently.
- The battery goes in with the positive (+) side facing up; inserting it upside down will prevent the fob from working.
- If your fob still does not work after replacing the battery, the problem is likely a worn circuit board or water damage, not the battery itself.
Identifying which battery your fob needs
The easiest way to find the right battery is to open your fob and look at the old battery itself. The battery type is printed on the flat side — you will see "CR2032" or "CR2035" or occasionally "CR2025". Write down this number and take it with you to the store, or search for it online.
If you cannot open the fob or the old battery is damaged, check your owner's manual. The manual lists the battery type for your specific model year. Chevrolet also publishes this information on their website by model and year, though you will need your vehicle identification number (VIN) to search.
CR2032 and CR2035 are not interchangeable — CR2035 is thicker and will not fit in a fob designed for CR2032. Buying the wrong size wastes money and does not solve the problem. When in doubt, ask the pharmacy staff to confirm the battery type before you buy.
Opening the fob case without damage
Locate the seam running around the edge of your fob case. This seam is where the two halves separate. Insert a flat coin — a dime, penny, or flathead screwdriver — into the slot along the seam and twist gently. Do not force it; the case should separate with light pressure.
If the fob has a removable key blade, pull it out first. This gives you better access to the battery compartment and prevents the blade from getting bent during disassembly. Some fobs have a small button or latch you press to release the blade; others straightforward slide out.
Once the case is open, you will see the battery sitting in a small metal holder or clip. The positive side (marked with a +) faces up toward you. Take a photo with your phone before removing anything — this makes reassembly faster and ensures you do not forget which way the battery goes.
Removing the old battery and installing the new one
Gently pry the old battery out of its holder using the edge of a coin or your fingernail. Do not use excessive force; the battery should come free with light pressure. If it is stuck, try prying from the opposite side of the holder.
Before inserting the new battery, check that the positive (+) side is facing up. This is the most common mistake — a battery installed upside down will not make electrical contact and the fob will not work. The positive side is usually shiny and marked with a plus sign.
Place the new battery into the holder with the positive side up and press down gently until it clicks or sits flush. You should hear or feel a small click as the battery seats in the metal clips. Do not force it; if it does not sit easily, remove it and check the orientation.
Reassembling the fob and testing it
Align the two halves of the fob case and press them together firmly until they snap. You should hear a distinct click as the case closes. If the case does not snap together easily, remove it and check that the battery is sitting flat and not blocking the closure.
If your fob has a removable key blade, reinsert it now. Most blades slide back into a slot on the fob case; push it in until it stops.
Test the fob by pressing each button while standing near your vehicle. You should see the lights flash or hear the locks engage. If nothing happens, open the fob again and check that the battery is installed with the positive side up. If the battery is correct and the fob still does not work, the problem is likely a corroded circuit board or water damage inside the fob, not the battery.
What to do if the fob still does not work
If you have replaced the battery and the fob still does not respond, try cleaning the battery contacts. Open the fob again and look at the metal clips holding the battery. If they appear dark, corroded, or dirty, wipe them gently with a dry cloth or a pencil eraser. Corrosion prevents electrical contact even with a fresh battery.
If the contacts are clean and a new battery does not work, water damage is the likely cause. Chevrolet key fobs are not waterproof, and exposure to rain, sweat, or a washing machine can corrode the circuit board inside. In this case, the fob needs replacement, not just a new battery. Contact a Chevrolet dealer or an automotive locksmith for a replacement fob and reprogramming.
Some Chevrolet fobs can be reprogrammed by the owner using a sequence of key turns in the ignition, but this does not fix a damaged circuit board. Reprogramming only works if the fob's electronics are intact and the problem is that the vehicle no longer recognizes it.
Where to buy replacement batteries and how much they cost
CR2032 and CR2035 batteries are sold at nearly every pharmacy, grocery store, and drugstore chain in the United States. CVS, Walgreens, Walmart, Target, and Kroger all stock them in the health and beauty or electronics section. A single battery costs $3 to $8 depending on the brand and retailer.
Online retailers including Amazon, eBay, and manufacturer websites sell batteries in bulk packs of 4 to 10 for $8 to $15 total. Buying in bulk is cheaper per battery if you have multiple fobs or want spares on hand. Shipping usually takes three to five business days unless you pay for expedited delivery.
Do not buy batteries from a Chevrolet dealer unless you have no other option. Dealers charge $15 to $25 for the same battery you can buy at a pharmacy for $5. Dealers also typically charge a labor fee of $50 to $100 to install the battery, even though the job takes five minutes.
Frequently Asked Questions
How do I know if my key fob battery is dying?
A dying battery shows up as reduced range — you have to stand closer to your vehicle for the fob to work — or buttons that require multiple presses to respond. Some fobs also emit a dim or flickering light when you press a button. These are all signs the battery voltage is dropping and replacement is needed soon.
Can I use a different battery type if I cannot find the exact one?
No. CR2032 and CR2035 are different sizes and will not work interchangeably. Using the wrong battery wastes money and leaves your fob non-functional. If your store does not have the correct battery in stock, order it online or try another retailer.
What if I drop the battery or lose it while replacing it?
Batteries are small and straightforward to lose. Keep the fob over a towel or in a shallow box while you work so the battery does not roll away. If you lose it, buy a replacement at any pharmacy. The cost is low enough that losing one is not a financial problem.
Do I need to reprogram my fob after replacing the battery?
No. Replacing the battery does not erase the fob's programming. Once you install the new battery and close the case, the fob should work when ready without any additional steps. If it does not work right away, the problem is the battery installation or a damaged circuit board, not lost programming.
How often do I need to replace the battery?
Most Chevrolet key fob batteries last three to four years with normal use. Heavy use — pressing buttons many times per day — may shorten battery life to two to three years. Light use may extend it to four or five years. There is no set schedule; replace the battery when the fob stops responding reliably.