What a Complete LS Engine Swap Kit Actually Includes
A complete LS engine swap kit is a bundle of engine mounts, transmission adapters, wiring harnesses, and cooling system components designed to fit an LS-series engine (typically a Chevrolet small-block V8) into a vehicle it didn't come with originally. The word "complete" is relative — most kits include the structural and electrical pieces you cannot easily source separately, but they do not include the engine itself, transmission, or many of the parts bolted to the engine.
What you actually get depends on which kit you buy and which LS variant you're installing. A kit for dropping an LS into a 1967 Chevelle will look different from one for a 1990s Miata. The core pieces are almost always engine mounts (the brackets that hold the engine to the frame), motor plate or transmission adapter (the metal piece connecting engine to transmission), engine bay wiring harness, and sometimes radiator hoses, heater hose fittings, or throttle cable brackets.
Many kits marketed as "complete" do not include fuel system components, exhaust manifolds, intake manifold, alternator brackets, power steering pump brackets, or air conditioning compressor mounts. You will need to source those separately or adapt existing ones from a donor vehicle. The kit is the skeleton; you provide the organs.
Key Takeaways
- A complete LS swap kit includes engine mounts, transmission adapter, and wiring harness, but not the engine, transmission, or most bolt-on accessories.
- You will need to source or fabricate fuel system components, exhaust manifolds, intake manifold, and accessory brackets separately.
- Kit quality and fitment vary widely by manufacturer and by the specific vehicle and LS engine combination you are using.
- Before buying, confirm the kit is designed for your exact vehicle year and model, and verify which LS generation (LS1, LS3, LT1, etc.) it supports.
- Hidden costs include machine shop work, custom fabrication, wiring modifications, and potential frame modifications depending on your vehicle's age and design.
Engine Mounts and Transmission Adapter — The Core of the Kit
The engine mounts are the most critical part of any swap kit. These are custom brackets that bolt the LS engine to your vehicle's frame or subframe. Factory mounts from the original engine will not work because the LS engine sits at a different angle and height than what your car was designed for. A poor-fitting mount will cause vibration, misalignment, and premature wear on the transmission.
The transmission adapter (sometimes called a motor plate or bellhousing adapter) is the metal plate that bolts between the engine and your transmission. If you are keeping your original transmission, the adapter lets the LS engine bolt to it. If you are installing a new transmission, some kits include an adapter for a common choice like a T56 or 4L60E, while others require you to buy the adapter separately. Confirm what transmission the kit is designed for before ordering.
Quality varies significantly. Budget kits may use thinner steel or less precise machining, which can lead to vibration or misalignment issues. Mid-range and premium kits typically include adjustable mounts or multiple mounting points to dial in the engine position correctly. Read reviews from people who have installed the same kit in the same vehicle before buying.
Wiring Harness and Engine Control Considerations
The LS engine requires a standalone wiring harness or a harness designed to work with your vehicle's existing electrical system. A complete kit usually includes a harness that connects the engine sensors, fuel injectors, ignition coils, and starter to a central point. What it does not do is integrate seamlessly with your original dashboard, gauges, or body electrical system — that work falls to you or a wiring specialist.
Some kits come with a plug-and-play harness for specific vehicles (usually newer Camaros or Corvettes being swapped into other Camaros or Corvettes). Most kits for older vehicles require custom wiring or the use of an aftermarket engine control unit (ECU) and a standalone harness. This is often the most time-consuming part of the swap and frequently requires a professional if you are not experienced with automotive electrical systems.
You will also need to decide whether to use the LS engine's original computer and tune it for your vehicle, or to use a standalone ECU like a Holley EFI or MoTeC system. This decision affects what harness you buy and how much additional wiring work you face. Some kit manufacturers partner with ECU companies and offer bundles; others leave this choice entirely to you.
Cooling System and Fuel System Components You Will Need Separately
Most complete kits do not include a radiator, water pump, or thermostat housing. You will need to source a radiator sized for the LS engine's cooling demands in your vehicle — this is usually larger than the original radiator. Some kits include radiator hose fittings or adapter plates, but you typically buy the radiator itself from a radiator shop or an aftermarket supplier who specializes in LS swaps.
The fuel system is almost never included in a "complete" kit. You need a fuel pump (usually an in-tank electric pump rated for LS fuel injection), fuel lines, a fuel pressure regulator, and a fuel filter. If your vehicle originally had a carburetor or mechanical fuel pump, you are starting from scratch. Many people use a Returnless fuel system or a return-style system depending on their engine management choice. Budget several hundred dollars for this alone.
Heater hoses and fittings may be included, but often they are not. The LS engine's heater ports are in different locations than older engines, so you may need custom hoses or adapter fittings. Some kits include these; others list them as optional add-ons.
Exhaust Manifolds, Intake, and Accessory Brackets
Exhaust manifolds are almost never part of a complete kit. You will buy these separately based on your vehicle's exhaust routing and your performance goals. Cast iron manifolds are cheaper and easier to fit; headers are more expensive but flow better. Confirm clearance with your frame and suspension before ordering.
The intake manifold is also separate. LS engines come in many variants, and intake manifolds vary by engine type and fuel system. A kit may specify which intake manifold works with it, but you buy it separately. Some people use a carbureted intake if they are running a carburetor setup, while others use a fuel-injected intake matched to their engine management system.
Accessory brackets for the alternator, power steering pump, air conditioning compressor, and water pump are sometimes included in kits, but often they are not. If they are not, you will need to fabricate or adapt brackets, or source them from a donor vehicle. This is a common source of hidden costs and delays.
Hidden Costs: Machine Work, Fabrication, and Frame Modifications
A complete kit covers the big structural pieces, but the actual swap often requires work beyond the kit itself. If you are swapping an LS into a vehicle with a different frame design (a 1960s car, for example), you may need to modify the frame, subframe, or engine bay to make the engine fit. This requires a machine shop or a skilled fabricator and can cost hundreds to thousands of dollars.
Custom fabrication is common for fuel lines, brake lines, wiring runs, and exhaust routing. If your vehicle has power steering, you may need to adapt or fabricate a power steering pump bracket and lines. Air conditioning requires custom hose routing and bracket work if you want to keep it functional.
Engine machine work — boring, honing, balancing, or rebuilding — is separate from the kit cost. If you are buying a used LS engine, factor in inspection and potential machine work. A freshly rebuilt or new LS engine costs significantly more than a used core.
How to Choose the Right Kit for Your Vehicle
Start by identifying your exact vehicle: year, make, model, and body style. Then identify which LS engine you plan to install — LS1, LS2, LS3, LS7, LT1, or another variant. Not all kits work with all engines. An LS1 kit may not fit an LS7 because the LS7 has a different block height and accessory locations.
Search for kits specifically designed for your vehicle and engine combination. Reputable manufacturers like Advance Adapters, Lokar, and engine-swap-specific shops publish fitment charts and compatibility lists. Read the product description carefully to see what is included and what is not. Contact the manufacturer with questions about specific components.
Look at reviews and forum posts from people who have done the same swap. They will tell you what the kit includes, what it does not, what surprised them, and what they had to source separately. This real-world feedback is often more useful than the kit description.
Budget for the full cost: kit, engine, transmission, radiator, fuel system, exhaust, intake, wiring work, machine shop time, and fabrication. A "complete" kit might be $2,000 to $5,000, but the total swap often costs $8,000 to $20,000 or more depending on the vehicle and your labor situation.
Frequently Asked Questions
Does a complete LS swap kit include the engine and transmission?
No. A complete kit includes mounts, adapters, and wiring harness, but you buy the engine and transmission separately. Some kits are sold as bundles with an engine, but these are marketed differently and cost significantly more.
Can I use my original transmission with an LS engine?
It depends on the transmission. Some original transmissions can be adapted to an LS engine using a transmission adapter plate included in the kit. Others are too weak or incompatible. Confirm with the kit manufacturer whether your transmission is supported before buying.
What is the difference between a complete kit and a partial kit?
A complete kit includes engine mounts, transmission adapter, and wiring harness. A partial kit might include only mounts or only an adapter. Read the product description carefully to see exactly what each kit includes.
Do I need a professional to install an LS swap kit?
It depends on your skill level and the complexity of your vehicle. straightforward swaps into newer vehicles with good kit support can be done by experienced DIY mechanics. Older vehicles or unusual combinations often require professional help, especially for wiring and fabrication work.
How long does an LS swap take?
A straightforward swap in a well-supported vehicle can take 40 to 80 hours of labor. Swaps requiring custom fabrication, frame modification, or extensive wiring work can take 150 to 300 hours or more. Professional shops typically charge $3,000 to $10,000 in labor depending on complexity.