Control arm replacement typically costs between $300 and $1,000 per arm, depending on your vehicle, which parts need replacing, and whether you do one or both sides at once.

A control arm is the link between your wheel hub and the frame that lets your wheel move up and down while steering. When it wears out, your steering becomes loose, your car pulls to one side, or your wheel alignment drifts. Replacing it is not optional—a failed control arm can cause you to lose steering control.

The cost breaks down into parts and labour. The arm itself runs $150 to $400 depending on whether it is an original manufacturer part or an aftermarket replacement. Labour typically adds $200 to $600 per arm because the job requires removing the wheel, disconnecting the steering and suspension, and then realigning the front end afterward. Many shops recommend replacing both sides at once even if only one is worn, because the second one usually fails within months, and doing both together saves labour time.

Key Takeaways

  • A single control arm replacement costs $300 to $1,000 installed, with most jobs running $400 to $700 per arm depending on your vehicle model and parts choice.
  • Replacing both control arms at the same time usually costs less in total labour than replacing one now and the other later, even though the parts cost doubles.
  • Worn control arms cause loose steering, pulling to one side, and uneven tyre wear, and ignoring them risks losing steering control on the road.
  • Aftermarket control arms cost less than original parts but may not last as long; your mechanic can advise which is worth the difference for your vehicle.
  • A wheel alignment is required after replacement and is usually included in the labour quote, but confirm this before authorising the work.

What drives the cost up or down

The biggest variable is your vehicle itself. A control arm for a Honda Civic costs far less than one for a full-size truck or luxury car, both in parts and labour time. Luxury vehicles and trucks often have more complex suspension geometry, which means longer removal and reinstallation time. A Civic might take 1.5 hours per side; a BMW or large truck might take 3 hours.

Your choice between original equipment manufacturer (OEM) parts and aftermarket parts also shifts the bill. An OEM control arm from the manufacturer costs more—sometimes $100 to $200 more per arm—but carries a longer warranty and usually lasts longer. Aftermarket arms from brands like Moog or Dorman cost less upfront but may wear faster. Many independent shops stock quality aftermarket parts and can discuss the trade-off with you before ordering.

Whether you replace one or both arms affects total cost. If only the driver's side is visibly worn, you might think replacing just that one saves money. But control arms wear in pairs—the passenger side is usually close behind. Replacing both at once means paying labour once instead of twice, which often saves $200 to $400 total even though you buy two arms instead of one.

Signs your control arms are wearing out

The first sign is usually a loose or wandering feeling in the steering wheel, especially on rough roads. You might notice the wheel drifts left or right without you turning the wheel, or the steering feels vague and requires constant small corrections. This happens because the worn arm has play in its ball joint—the connection point that should be tight.

Uneven tyre wear is another clue. A worn control arm throws off your wheel alignment, so one edge of the tyre wears faster than the rest. If you see the inner or outer edge of your front tyres worn down while the middle is still good, have the alignment checked and the control arms inspected.

A clunking sound from the front suspension when you hit a bump or pothole often means a control arm ball joint is loose. The arm moves slightly in its socket, creating that knock. This is a safety issue—the arm can separate completely if the ball joint fails entirely, which means you lose steering control.

Labour time and what the job includes

A control arm replacement requires removing the wheel, unbolting the arm from both the frame and the steering knuckle, and installing the new one. The steering knuckle—the part that holds your wheel—must be supported while the arm is out, which is why this is not a job for an untrained person with a jack.

After the new arm is bolted in, the front end must be realigned. This is not optional. A wheel alignment uses a machine to measure and adjust the angle of your wheels so they point straight and wear evenly. Most shops include this in their labour quote, but confirm before you authorise the work. If alignment is quoted separately, expect another $100 to $200.

Some shops will also inspect the other suspension components while they have the wheel off—the tie rods, sway bar links, and struts. If any of these are worn, they will tell you. You do not have to replace them all at once, but knowing what else is loose helps you plan future maintenance.

OEM versus aftermarket parts

An original equipment manufacturer (OEM) control arm is made by your vehicle's manufacturer or a supplier they approved. It meets the exact specifications for your model and usually comes with a warranty of 12 months to 3 years depending on the shop. OEM parts cost more but are a known quantity—they fit perfectly and last as long as the original did.

Aftermarket parts are made by independent suppliers like Moog, Dorman, or TRW. They are engineered to fit your vehicle and meet safety standards, but they are not made by your manufacturer. Quality varies. Some aftermarket arms are nearly as good as OEM and cost $50 to $150 less per arm. Others wear faster or have fitment issues. A reputable shop will stock brands they trust and can tell you which ones hold up well on your vehicle type.

For most people, a quality aftermarket arm from a known brand is the right choice—it saves money and works well. If your vehicle is under warranty or you plan to keep it for many more years, OEM parts may be worth the extra cost for peace of mind. Ask your mechanic which they recommend for your specific situation.

When to replace one arm versus both

If your mechanic finds that only one control arm is worn and the other is still tight, you might think replacing just the worn one saves money. In the short term it does—you pay for one arm and one labour session. But the second arm usually fails within 3 to 12 months because it has been under the same stress and is at the same stage of wear.

Replacing both at once costs more upfront but saves you a second trip to the shop, a second alignment, and a second labour charge. The total cost is usually $200 to $400 less than doing them separately, even though you buy two arms instead of one. Most shops will recommend both if they find one is worn, and that recommendation is usually sound.

The exception is if one arm is clearly damaged—bent from hitting a pothole, for example—while the other is still in good condition. In that case, replacing just the damaged one makes sense. But if both are straightforward worn from age and mileage, do both together.

What happens if you delay the repair

A worn control arm does not get better. The ball joint will continue to loosen, and the steering will become progressively vague and unpredictable. Your tyres will wear faster, which means you will need new ones sooner—a $400 to $800 cost that could have been avoided. Your fuel economy may also drop slightly because the misaligned wheels create more rolling resistance.

The real danger is loss of steering control. If the ball joint fails completely while you are driving, the wheel can move independently of your steering input. You might lose the ability to steer that wheel, especially in an emergency manoeuvre. This is rare but serious. It is not worth the risk to save a few weeks of driving.

Delaying also means you might need other suspension work done at the same time. A worn control arm puts extra stress on the tie rods, sway bar links, and wheel bearings. If you wait too long, you may end up replacing multiple components instead of just the arm, which costs significantly more.

Frequently Asked Questions

Can I drive with a worn control arm?

You can drive short distances, but it is not safe for regular use. Steering becomes unpredictable, especially on rough roads or during emergency manoeuvres. Have it replaced as soon as you can schedule the work.

Do I need an alignment after control arm replacement?

Yes. Removing and reinstalling a control arm changes the angle of your wheel. An alignment is required to set it back to the correct angle and prevent uneven tyre wear. Most shops include this in their labour quote.

Is there a difference between a ball joint replacement and a control arm replacement?

Some control arms have a ball joint that can be replaced separately, which costs less. Others have the ball joint welded or pressed on, so you must replace the entire arm. Your mechanic will tell you which applies to your vehicle.

How long does a control arm replacement take?

Typically 2 to 4 hours total, depending on your vehicle and whether one or both arms are being replaced. Most shops can complete the work in one day, though you should confirm the timeline when you book.

Will replacing control arms improve my fuel economy?

Slightly. Worn control arms cause wheel misalignment, which increases rolling resistance and reduces fuel economy by 1 to 3 percent. Replacing them restores alignment and may recover some of that loss, but the improvement is modest.