Where to get a car key copied and what it costs

You can get a car key copied at a hardware store, a locksmith, a car dealership, or an automotive parts retailer. The cost and time depend on the key type and where you go. A basic metal key copy at a hardware store or parts chain typically costs $2 to $10 and takes minutes. A transponder key (one with a chip that communicates with your car's ignition system) costs $50 to $200 and requires programming, which takes longer and usually requires a locksmith or dealership.

The fastest option for a basic key is usually a hardware store or big-box retailer like Home Depot or Lowe's. For transponder keys or if you need the key programmed to your specific vehicle, a locksmith or your car's dealership is more reliable, though dealerships are typically the most expensive option.

Key Takeaways

  • Basic metal keys cost $2 to $10 and can be copied at hardware stores in minutes, while transponder keys cost $50 to $200 and require programming at a locksmith or dealership.
  • You need the original key or a key code to get a copy made; the key code is usually found on your vehicle's registration or can be looked up by a locksmith using your VIN.
  • Transponder keys have a chip inside and will not work in your car's ignition unless they are programmed to match your vehicle's security system.
  • A locksmith can often copy and program a key faster and cheaper than a dealership, and can come to your location if you are locked out.

Types of car keys and what each one needs

A basic metal key has no electronics and works purely by its physical shape. Any hardware store, locksmith, or parts retailer can copy it in minutes using a key-cutting machine. You just need the original key or the key code.

A transponder key contains a small chip that sends a signal to your car's immobilizer system. The car will not start if the key is not programmed to match that system. Copying the physical key is straightforward, but programming the chip requires special equipment and knowledge of your vehicle's security protocol. This is why transponder key copies cost much more and take longer.

A key fob is a remote control that locks and unlocks your car from a distance. Some fobs are separate from the key; others are built into the key itself. Fobs can be copied and reprogrammed, but the process is more complex than a standard key and usually requires a dealership or experienced locksmith.

A smart key or push-to-start key uses proximity sensors and a button instead of a traditional key slot. These are the most expensive to copy and program because they require the most advanced equipment and vehicle-specific knowledge.

What you need before you go to get a key copied

Bring your original key with you. If you do not have it, you will need your vehicle's key code. This code is usually printed on a small tag that came with your car when you bought it, or it may be listed in your owner's manual or vehicle registration paperwork. If you cannot find it, a locksmith can look up the code using your vehicle identification number (VIN), which is on your registration, insurance card, or the driver's side door jamb.

For a transponder key or fob, you will also need to prove ownership of the vehicle. A dealership will ask for your registration or title. A locksmith may ask for your ID and registration. This is a security measure to prevent someone from copying a key to a car that is not theirs.

If you are getting a key copied at a dealership, call ahead and ask how long it will take and what documents to bring. Dealerships often require an appointment and may take several days.

How locksmiths, hardware stores, and dealerships compare

OptionBasic Key CostTransponder Key CostTimeBest For
Hardware store$2–$10Not available5–15 minutesstraightforward metal keys only
Locksmith$5–$15$50–$15030 minutes to 1 hourAny key type; can come to you
Car dealership$10–$25$100–$2001–3 daysRare key types; may provide compatibility
Auto parts store$3–$12$50–$12015 minutes to 1 hourBasic and some transponder keys

A locksmith is often the best balance of cost, speed, and convenience. Many locksmiths can program transponder keys and fobs on the spot, and they can meet you at your car or home. Call a few locksmiths in your area and ask for a quote before you commit.

A hardware store is the cheapest and fastest option if you only need a basic metal key copied. However, they cannot program transponder keys or fobs.

A dealership is the most expensive option but guarantees that the key will work with your specific vehicle. Use a dealership if you have an unusual key type, if a locksmith cannot help, or if you want the assurance of an official source.

What happens if you lose your only key

If you have lost your only key and cannot get into your car, a locksmith can pick or manipulate the lock to open the door, then cut and program a new key on site. This costs more than a routine key copy—usually $100 to $300 depending on the key type and your location—but it is faster than waiting for a dealership appointment.

If your car is locked and you cannot reach a locksmith, you can call a roadside information service like AAA if you are a member, or a local towing company. They can tow your car to a locksmith or dealership.

Keep a spare key in a safe place at home, not in your car or on your person. This prevents you from being stranded if you lose your main key.

Programming a transponder key yourself

Some car owners wonder if they can program a transponder key without going to a locksmith or dealership. For many vehicles made after the mid-1990s, the answer is no. The programming process requires specialized equipment and access to your vehicle's security codes, which manufacturers do not release to the public for safety reasons.

A few older vehicles and some aftermarket key fobs can be programmed using a sequence of ignition turns or button presses, but this is rare and varies by make and model. Check your owner's manual or search online for your specific vehicle year and make to see if this is an option. Even if it is possible, a locksmith or dealership is usually faster and more reliable.

Frequently Asked Questions

Can I get a key copied if I do not have the original?

Yes. A locksmith can look up your key code using your VIN and cut a new key without the original. You will need to show proof of ownership, such as your registration or title. This costs slightly more than copying an existing key but is faster than waiting for a dealership to order one.

How long does it take to program a transponder key?

Programming usually takes 30 minutes to 1 hour at a locksmith and 1 to 3 days at a dealership if you need an appointment. Some locksmiths can program while you wait; call ahead to confirm. The actual programming takes minutes, but the time includes cutting the key and verifying it works.

Will a key copied at a hardware store work in my car?

A basic metal key copied at a hardware store will work if your car uses a straightforward mechanical lock. If your car has a transponder key or immobilizer system (most cars made after 1995), a hardware store copy will open the door but will not start the engine. You need a locksmith or dealership to program it.

What is the cheapest way to get a spare key?

For a basic metal key, a hardware store is cheapest at $2 to $10. For a transponder key, a locksmith is usually cheaper than a dealership, costing $50 to $150 instead of $100 to $200. Call a few locksmiths in your area for quotes.

Can I get a key copied if my car is locked and I cannot get in?

A locksmith can open your car door and cut a new key on site, though this costs more than a routine copy. If you cannot reach a locksmith, call a towing company or roadside information service to have your car towed to a locksmith or dealership.