What a diesel tech apprenticeship actually is
A diesel tech apprenticeship is a paid, on-the-job training program where you learn to diagnose, repair, and maintain diesel engines while working under a licensed technician. You earn a wage from day one—typically starting between $16 and $22 per hour depending on your location and employer—and the program usually lasts three to four years. Unlike a classroom-only trade school, you spend most of your time in a real shop working on real trucks, buses, generators, and heavy equipment, with classroom instruction built in to teach the theory behind what your hands are doing.
The apprenticeship ends with a credential: either a journeyperson diesel technician certificate from your state's apprenticeship program or an industry certification like ASE (Automotive Service Excellence) Heavy Duty Diesel. That credential means you can work independently, take on more complex jobs, and command higher pay. Many shops will not hire you as a full technician without it.
Key Takeaways
- Apprenticeships combine paid work (starting $16–$22 per hour) with classroom time over three to four years, ending in a state or industry credential.
- You find openings through your state's apprenticeship office, the Department of Labor's ApprenticeshipUSA website, or by contacting diesel shops, truck fleets, and heavy equipment dealers directly.
- Most programs require a high school diploma or GED, a valid driver's license, and the ability to pass a background check and drug test.
- Classroom hours typically run one day per week or in blocks, so you keep earning while you learn theory; your employer usually pays tuition.
- After completion, you can work for independent shops, fleet maintenance departments, equipment dealers, or start your own business.
How to find an apprenticeship opening
Start with your state's apprenticeship office. Every state runs a program that registers apprenticeships and connects job seekers to openings. Search for yours at ApprenticeshipUSA.gov, which lists programs by state and industry. You can also call your state's Department of Labor directly—they maintain a current list of registered diesel tech programs and employers actively taking apprentices.
Contact diesel shops, truck fleets, and heavy equipment dealers in your area. Large employers like Schneider National, Marten Transport, and Crete Carrier often run formal apprenticeship programs and post openings on their careers pages. Smaller independent shops may not advertise but will train an apprentice if you walk in and ask. Call ahead, ask to speak with the shop manager or service director, and bring a resume. Many shops hire apprentices seasonally—spring and summer are peak hiring times because that is when equipment breaks down most.
Check job boards like Indeed, LinkedIn, and Craigslist, filtering for "diesel apprentice" or "diesel tech apprentice" in your area. Trade schools that offer diesel programs often have job placement services and connections to local employers; even if you choose an apprenticeship over a school program, calling a local diesel program and asking which shops they place students with can point you to active hiring.
What employers and programs require before you start
You will need a high school diploma or GED. Some programs accept students without one if you are willing to earn it while apprenticing, but most require it upfront. You must have a valid driver's license—many shops will not hire you without one, and you will need it to test-drive vehicles after repairs. A clean background check and drug test are standard; most employers require both before your first day.
Some programs ask for a basic math or reading assessment to make sure you can handle the classroom portion. This is not a pass-fail gate; it helps the program place you in the right level of instruction. A few employers prefer some shop experience—even a summer job washing vehicles or doing tire changes—but it is not required. What matters most is showing up on time, asking questions, and being willing to do the unglamorous work (cleaning, organizing, running parts) that fills the first months of any apprenticeship.
How the classroom and shop time split
Most apprenticeships run on a day-release model: you work four days a week in the shop and attend classroom one day per week, usually at a community college or trade school. Some programs use block scheduling, where you work for eight weeks straight, then attend classroom for two weeks full-time, then return to the shop. A few larger employers run in-house training, where an instructor comes to the shop or you attend classes on the employer's property.
Your employer pays your tuition—you do not pay out of pocket. You earn your regular wage during classroom time, so you are not losing income to attend. Over the three to four years, you will log roughly 6,000 to 8,000 hours of paid shop work and 600 to 900 hours of classroom instruction. The classroom covers diesel engine theory, electrical systems, hydraulics, diagnostic tools, emissions systems, and safety. The shop work moves from basic tasks (fluid changes, filter replacements, bolt torquing) to complex diagnostics and engine rebuilds.
What the work actually involves day to day
In your first year, you will spend time learning the shop layout, tool names, and safety rules. You will change oil and filters, replace belts, check fluid levels, and help senior technicians by handing them tools and holding parts steady. You will learn to read a work order, understand what the customer reported, and trace that complaint to the actual problem. You will get dirty—diesel work is not clean—and you will repeat tasks until your hands know them without thinking.
By year two and three, you move to more complex work: diagnosing electrical faults with a multimeter, pulling injectors and checking spray patterns, replacing turbochargers, rebuilding transmissions, and troubleshooting emissions systems. You will work on trucks, buses, construction equipment, generators, and agricultural machinery. You will learn to use diagnostic computers, understand fault codes, and explain repairs to customers. The work is physical—you will be on your feet, reaching, bending, and lifting—and it requires precision. A bolt torqued to the wrong specification or a hose routed incorrectly can cause an engine to fail.
Certifications and credentials after apprenticeship
When you complete your apprenticeship, your state issues a journeyperson diesel technician certificate. This is a legal credential that says you have met your state's standards for training and hours. You can use it to work independently, bid on jobs, or move to another state (though some states require reciprocity paperwork). Many employers will not hire you as a full technician without it.
You can also pursue ASE Heavy Duty Diesel certification, which is an industry standard run by the National Institute for Automotive Service Excellence. ASE tests cover engines, drivetrains, electrical systems, brakes, and suspension. You take the test after your apprenticeship (or sometimes during it, in the final year). ASE certification is not required by law, but it signals to employers and customers that you know your trade. Some shops offer a small pay bump for ASE-certified technicians, and customers often ask for them by name.
Pay progression and job options after completion
Apprentice wages start around $16 to $22 per hour and rise each year as you gain hours and skills. By your final year, you may earn $20 to $28 per hour. Once you hold your journeyperson certificate, entry-level technician pay typically ranges from $22 to $32 per hour, depending on your location and employer. Experienced diesel techs at large fleets or independent shops often earn $35 to $50+ per hour, plus benefits like health insurance, retirement plans, and paid time off.
After apprenticeship, you can work for independent diesel shops, truck fleets (Schneider, Marten, Crete, and others), heavy equipment dealers (Caterpillar, John Deere), bus maintenance departments, or start your own mobile repair business. Diesel technicians are in demand—the Bureau of Labor Statistics reports steady need for heavy equipment mechanics and technicians. You can also move into shop supervision, training, or sales if you want to step away from hands-on work later in your career.
Frequently Asked Questions
Do I have to work for the same employer the whole time?
No. You can change employers during your apprenticeship, but your new employer must be registered with your state's apprenticeship program and agree to continue your training. Your hours and progress transfer. Switching shops is common if you move, find a better opportunity, or have a conflict with your current employer. Just notify your state apprenticeship office when you change.
What if I do not have a high school diploma yet?
Some apprenticeship programs will enroll you if you are working toward your GED, but most require the diploma or GED before you start. If you do not have one, earn it first through your local community college or adult education program. It usually takes a few months to a year. Once you have it, you can explore to apprenticeships.
Can I do an apprenticeship part-time while working another job?
Most apprenticeships are full-time or near full-time—you work four to five days a week in the shop plus one day of classroom. Fitting another job around that is difficult and not recommended. The apprenticeship is designed to be your main income and focus. If you need to work part-time, look for a classroom-based diesel program at a trade school instead, though you will not earn while you learn.
How long does it take to become a diesel tech?
Most apprenticeships take three to four years to complete. Some programs compress the timeline to two and a half years if you work extra hours or attend year-round. The exact length depends on your state's requirements and your employer's program. You earn the whole time, so the longer timeline is not a financial burden the way it would be in a school program.
What happens if I fail the final exam or do not finish?
If you do not pass the state exam on your first try, you can retake it. Most people pass on the second attempt. If you leave the apprenticeship before completion, your hours and training do not disappear—you can resume with another registered employer or program. You just will not hold the journeyperson certificate until you finish and pass the exam.