Training wheels on dirt bikes are stabiliser bars that bolt to the rear axle and touch the ground, preventing the bike from tipping past a certain lean angle
A dirt bike training wheel system consists of two metal arms that extend from the rear axle on either side of the bike. These arms have small wheels or skids at the end that make contact with the ground when the bike leans beyond a preset angle—usually somewhere between 35 and 50 degrees. The purpose is straightforward: they catch the bike before it falls completely over, giving a new rider time to correct their balance without crashing.
The mechanics are straightforward. As the bike leans into a turn, the training wheels stay mounted but don't touch down until the lean angle exceeds the threshold the system was set for. Once they do touch, they support some of the bike's weight and prevent a full tip-over. This gives the rider a physical boundary—a wall they can feel—rather than an invisible one they have to guess at.
Training wheels on dirt bikes are different from the ones on children's bicycles. Dirt bike versions are heavier-duty, adjustable, and designed to work at higher speeds and on rougher terrain. They're also removable, which matters because a rider needs to outgrow them eventually.
Key Takeaways
- Training wheels on dirt bikes mount to the rear axle and prevent the bike from tipping past a set lean angle, giving new riders a physical boundary to learn against.
- They work best for riders learning basic throttle control and balance on flat or gently rolling terrain, not for advanced techniques like jumping or cornering at speed.
- Most training wheel systems are adjustable, so the lean angle can be increased as the rider improves, gradually removing the safety net.
- Training wheels add weight and change how the bike handles, so they should be removed once a rider is ready to learn without them.
- They are not a substitute for proper instruction, protective gear, or starting on a bike that fits the rider's size and strength.
What training wheels actually prevent and what they don't
Training wheels stop the bike from falling over sideways during low-speed manoeuvres and while learning to balance. They're most useful when a rider is stationary or moving slowly—learning to mount and dismount, practising throttle control in a straight line, or getting used to the bike's weight and how it feels under them. In these situations, training wheels remove the fear of dropping the bike and let the rider focus on one skill at a time.
What they don't do is teach cornering, jumping, or any technique that requires the bike to lean intentionally. A rider on training wheels cannot learn to carve a turn because the wheels will catch before the lean angle gets steep enough to turn properly. They also don't prevent forward crashes (flipping over the handlebars), crashes from hitting obstacles, or loss of control from going too fast. Training wheels are a single-axis safety device—they only work against sideways tipping.
This is why training wheels have a limited lifespan in a rider's development. They're useful for the first few hours, maybe the first few days. After that, they become a crutch that prevents learning the actual skills needed to ride a dirt bike safely.
How to adjust training wheels as a rider improves
Most training wheel systems have an adjustment mechanism—either a bolt that raises or lowers the arm, or spacers that change the distance from the axle to the ground. The idea is to gradually increase the lean angle threshold as the rider gets more confident and skilled. A beginner might start with the wheels touching at 35 degrees of lean. After a week or two, they move to 40 degrees. Then 45, then 50. Eventually, the arms are raised so high they never touch the ground, and the rider is effectively riding without them.
The adjustment should happen in small increments, not all at once. Raising the threshold too quickly can cause a crash if the rider isn't ready. Raising it too slowly wastes time and keeps the rider dependent on the training wheels. A good rule is to increase the angle only after the rider has gone several sessions without the wheels touching down at all.
Some riders and instructors prefer to remove training wheels completely rather than adjust them gradually. This forces the rider to learn balance when ready but also increases the risk of crashes. Either approach works; it depends on the rider's confidence and the instructor's judgment.
The weight and handling penalty of training wheels
Training wheels add 10 to 20 pounds to the bike, depending on the system. That's not trivial on a small dirt bike. The added weight is mounted low and to the sides, which changes the bike's centre of gravity and how it responds to steering input. The bike will feel slower to turn and less nimble, especially at higher speeds.
This is actually part of why training wheels work—the extra weight makes the bike more stable and harder to tip. But it also means the bike doesn't feel like itself. Once the training wheels come off, the bike will feel lighter, quicker, and more responsive. A rider who has spent weeks on training wheels may be surprised by how different the bike handles without them, even if they're technically ready.
This is another reason to remove training wheels sooner rather than later. The longer a rider uses them, the more they adapt to the altered handling, and the bigger the adjustment when they come off.
When training wheels make sense and when they don't
Training wheels are most useful for very young riders (under 10), riders who are significantly smaller than the bike they're learning on, or riders who are returning to dirt biking after a long break and have lost confidence. They're also helpful in structured training environments where an instructor can monitor progress and adjust the system appropriately.
Training wheels are less useful for older kids or adults learning to ride, riders on properly sized bikes, or anyone who has already ridden motorcycles or dirt bikes before. These riders usually pick up balance quickly enough that training wheels become a hindrance rather than a help. They're also not appropriate for any riding that involves speed, jumps, or technical terrain.
The best use of training wheels is as a temporary tool for the first few sessions, not as a long-term solution. Think of them as training wheels on a bicycle—useful for a few weeks, then removed and never needed again.
Installation, maintenance, and removal
Training wheels bolt to the rear axle using the same mounting points as the rear wheel. Installation takes about 30 minutes with basic tools—usually just a wrench and possibly a drill if you need to add mounting holes. Most systems come with detailed instructions specific to the bike model.
Once installed, training wheels need regular checks. The bolts can loosen from vibration, so they should be tightened before every ride. The wheels themselves can wear or flatten if they're dragging on the ground constantly, so inspect them for damage. If the wheels are skids rather than actual wheels, they'll wear faster and may need replacement after heavy use.
Removal is as straightforward as unbolting the arms. Some riders keep the training wheels and store them in case they need them again; others sell them or pass them on to another rider. The mounting holes on the axle can be left as-is or filled with blanking bolts to keep dirt out.
Training wheels versus other learning tools
Training wheels are one option among several for helping a new rider learn. Other approaches include starting on a smaller, lighter bike that's easier to control; using a riding coach who can provide real-time feedback; practising in a controlled environment like a flat, open field; or straightforward accepting that some crashes are part of learning and letting the rider progress naturally.
Many experienced instructors prefer to skip training wheels entirely and focus on teaching proper technique from the start. They argue that training wheels can create bad habits—riders lean too far because they know the wheels will catch them, or they don't develop the muscle memory for balance because the wheels are doing part of the work. Other instructors see training wheels as a confidence builder that gets nervous riders over the initial fear of tipping.
The best approach depends on the individual rider, their age, their prior experience, and the bike they're learning on. Training wheels are a tool, not a requirement.
Frequently Asked Questions
Can I use training wheels on any dirt bike?
Most training wheel systems are designed for specific bike models or frame types, so you need to check compatibility before buying. Some universal systems exist, but they may not fit as securely. Talk to the manufacturer or a dealer about what will work with your bike.
How long should a rider use training wheels?
Most riders outgrow training wheels within a few days to a few weeks of regular practice. If a rider is still relying on them after a month of frequent riding, it's time to remove them and focus on balance without the safety net. Staying on training wheels too long can actually slow progress.
Do training wheels prevent all crashes?
No. Training wheels only prevent sideways tip-overs. They don't protect against forward crashes, hitting obstacles, or losing control from speed or poor technique. A rider on training wheels still needs protective gear and should still ride in a safe environment.
What's the difference between training wheels and a stabiliser bar?
The terms are often used interchangeably, but some systems use a single bar down the centre instead of two arms on the sides. Centre-mounted stabilisers work the same way—they prevent tipping past a set angle—but they may affect handling differently. Ask the manufacturer which type is best for your bike and riding style.
Can an adult use training wheels on a dirt bike?
Yes, though it's less common. An adult learning to ride for the first time might benefit from training wheels for the first few sessions, but most adults pick up balance quickly enough that they become unnecessary. Training wheels are more often used for children and younger teenagers.