What a DJM Suspension Lowering Kit Is
A DJM suspension lowering kit is a set of replacement suspension components made by DJM Suspension that reduces the ride height of your vehicle. The kit typically includes lowered coil springs, sometimes paired with new shocks or struts, and occasionally additional hardware like camber plates or control arms. DJM manufactures kits for specific vehicle makes and models — you cannot use a kit designed for a Honda Civic on a Ford F-150.
The kit works by replacing your factory springs with shorter, stiffer ones that compress the suspension and bring the chassis closer to the ground. How much lower depends on the kit: some drop the vehicle 1 to 1.5 inches, while others lower it 2 to 3 inches or more. The amount of drop is fixed when you buy the kit — you cannot adjust it after installation the way you can with coilovers.
DJM kits are sold as complete packages, meaning all the parts you need for installation come in one box. You still need to pay a mechanic or shop to install them, and you may need a wheel alignment afterward to prevent uneven tire wear.
Key Takeaways
- DJM lowering kits reduce your vehicle's ride height by replacing factory springs with shorter ones, with drop amounts ranging from 1 to 3 inches depending on the kit.
- Each kit is designed for a specific vehicle model year and body style, so you must confirm compatibility before purchasing.
- Installation requires removing the old suspension components and bolting in the new ones, a job that typically costs $300 to $800 in labor at a shop.
- Lowering changes how your vehicle handles, sits, and wears its tires, and may affect your warranty or insurance coverage depending on your policy.
- DJM kits are a permanent modification — removing them and returning to stock height requires buying and installing factory parts again.
How Installation Works and What It Costs
Installation involves lifting the vehicle, removing the wheels, unbolting the factory springs and shocks or struts, and bolting in the DJM components in their place. The exact steps depend on whether your vehicle is front-wheel drive, rear-wheel drive, or all-wheel drive, and whether the kit includes new shocks or only springs.
Labor costs at a shop typically run $300 to $800, depending on your location and the shop's hourly rate. Some shops charge a flat rate for suspension work; others charge by the hour. A four-wheel alignment after installation usually costs $100 to $200 and is strongly recommended to prevent your tires from wearing unevenly on the inside or outside edges.
The total out-of-pocket cost — kit plus labor plus alignment — usually falls between $600 and $1,500. You can reduce this by installing the kit yourself if you have suspension experience and the right tools, but improper installation can damage the kit, harm your vehicle's handling, or create a safety hazard.
Changes to Handling, Comfort, and Appearance
Lowering your vehicle stiffens the suspension and lowers the center of gravity, which can improve cornering grip and reduce body roll in turns. However, the ride becomes noticeably firmer — bumps and road imperfections transmit more directly to the cabin. Some drivers prefer this sportier feel; others find it uncomfortable on rough roads or long drives.
The lower stance also changes how your vehicle looks. The wheels sit higher in the wheel wells, the gap between the tire and fender shrinks, and the overall profile appears more aggressive or "tucked." This is the primary reason many owners install lowering kits — the visual change is when ready and dramatic.
Lowering can create practical problems. Your vehicle's ground clearance decreases, so speed bumps, steep driveways, and unpaved roads become hazards. If the kit drops the vehicle too far, the suspension may bottom out over large bumps, damaging components or creating a clunking noise. Some kits are designed to avoid this; others are not.
Warranty and Insurance Considerations
Installing a lowering kit may void your vehicle's factory warranty on suspension and related components. Check your warranty paperwork or contact your dealership to understand what coverage you lose. Some dealers will still service other systems (engine, transmission, electronics) even after suspension modifications, but suspension-related repairs become your responsibility.
Your insurance company may need to know about the modification. Some insurers do not care; others may adjust your premium slightly or require you to declare the change. A few will deny a claim if you did not disclose the modification and it contributed to an accident. Contact your insurance agent before installation to ask whether you need to report it.
If you financed or leased your vehicle, check your loan or lease agreement. Some contracts prohibit modifications without the lender's or lessor's written consent. Returning a leased vehicle with a lowering kit installed may result in charges for "excessive wear" or "unauthorized modifications."
Compatibility and Choosing the Right Kit
DJM makes kits for a range of vehicles, but not all models. Before buying, confirm that a kit exists for your exact vehicle year, body style, and drivetrain. A 2020 Honda Civic Si kit will not fit a 2020 Honda Civic LX, and a rear-wheel-drive kit will not work on a front-wheel-drive car.
Check the product listing or contact DJM directly with your vehicle's VIN to verify compatibility. Many retailers also list compatible models in the product description. Installing an incompatible kit can result in poor fitment, handling problems, or damage to suspension components.
DJM offers kits at different price points with different drop amounts. A budget kit might drop your vehicle 1 inch and cost $200 to $400; a more aggressive kit might drop it 2.5 inches and cost $500 to $800. More aggressive drops often come with stiffer springs and may include upgraded shocks. Consider how much lower you want to go and how much you are willing to spend on both the kit and installation.
Removing or Reversing a Lowering Kit
If you decide you want your vehicle back at stock height, you will need to buy factory suspension components and have them installed. This costs roughly the same as the original installation — $300 to $800 in labor — plus the cost of new springs and shocks, which can run $200 to $600 depending on your vehicle.
The DJM kit itself cannot be "adjusted" back to stock height; it must be physically removed and replaced. If you sell your vehicle with the kit installed, the new owner inherits the lowered suspension. Some buyers view this as a bonus; others see it as a drawback if they prefer stock height.
Keep your original factory suspension components if you remove them, or ask the shop to store them. Having them on hand makes it easier and cheaper to return to stock if you change your mind later.
Alternatives to DJM Lowering Kits
Coilovers are an alternative that allows you to adjust ride height after installation. They cost more upfront ($800 to $2,000 or higher) but give you flexibility to raise or lower the vehicle without buying new parts. Coilovers also let you adjust spring stiffness and damping, which DJM kits do not.
Air suspension systems electronically adjust ride height at the push of a button, but they are expensive, complex, and available only for certain vehicles. They are more common on luxury or performance vehicles.
Spacers are thin metal discs that sit between the spring and the chassis to lower the vehicle without replacing the spring itself. They are cheaper than a full kit but offer less control over how the suspension behaves and may not provide as clean a look.
If you want a lower stance without permanent modification, wheel and tire packages with larger-diameter wheels and lower-profile tires can create a visual lowering effect without touching the suspension. This approach is reversible and does not affect handling.
Frequently Asked Questions
Will a lowering kit damage my vehicle?
A properly installed DJM kit designed for your vehicle will not damage it. However, poor installation, an incompatible kit, or excessive lowering can cause suspension components to bottom out, tires to wear unevenly, or handling to become unsafe. Have the work done by a shop experienced with suspension modifications and get a four-wheel alignment afterward.
Can I install a lowering kit myself?
If you have suspension experience and the right tools (jack, jack stands, spring compressor, torque wrench), you can install a kit yourself. However, suspension work is safety-critical — mistakes can cause the vehicle to handle poorly or fail during driving. Most owners have a shop do the work to may support it is done correctly.
How long does a lowering kit last?
The springs themselves last the life of the vehicle, but the shocks or struts (if included in your kit) typically wear out in 50,000 to 80,000 miles, the same as factory components. You will need to replace them when they fail, which costs $200 to $600 depending on your vehicle.
Will lowering my vehicle make it fail inspection?
This depends on your state's inspection rules. Some states have no restrictions on suspension modifications; others require that your vehicle maintain a minimum ground clearance or that lights remain at a certain height. Check your state's vehicle inspection requirements before lowering, or ask your inspection station whether your modification will pass.
Can I raise my vehicle back to stock height after lowering it?
Yes, but you will need to buy factory suspension components and pay for installation again, which costs $500 to $1,400 total. Keep your original springs and shocks if possible — having them makes the reversal cheaper and easier.