Yes, the 2019 Charger Scat Pack has an electronic parking brake
The 2019 Dodge Charger Scat Pack comes standard with an electronic parking brake, not a traditional foot pedal or hand lever. It's a button-operated system located on the dashboard to the left of the steering wheel. Press the button once to engage; press it again or shift into Drive and the brake releases automatically.
This is a significant change from older Charger models, which used mechanical parking brakes. The electronic version is more compact, frees up floor space, and integrates with the vehicle's stability control system. However, it also means you're dependent on the electrical system to engage and release it — something worth understanding before you need it.
Key Takeaways
- The 2019 Scat Pack uses a button-operated electronic parking brake on the dashboard, not a foot pedal or hand lever.
- The brake engages with one button press and disengages automatically when you shift into Drive or manually when you press the button again.
- If the battery is dead or the electrical system fails, you can still engage the parking brake using the manual override — a small slot near the button that accepts a flathead screwdriver.
- The electronic system works with the vehicle's hill-start information and stability control, so it may behave differently on steep grades than older mechanical brakes.
How the button-operated system works in daily driving
When you park the 2019 Scat Pack, press the electronic parking brake button once. You'll hear a soft click and see a light on the dashboard confirm engagement. The brake holds the vehicle in place using the rear brake calipers — the same components that stop you when you press the pedal.
When you're ready to drive, you have two options: shift into Drive and the brake releases automatically, or press the button again to release it manually. Most drivers find the automatic release convenient, but some prefer the manual method for added control on hills. The system is designed to work smoothly either way.
On steep grades, the electronic brake may engage hill-start information automatically. This feature prevents rollback when you move your foot from the brake pedal to the accelerator. It's a safety feature, but it means the brake may hold slightly longer than you expect on an incline — this is normal behavior.
What happens if the battery dies or power fails
If your battery is completely dead, the electronic parking brake button won't work. However, Dodge built in a manual override so you're not stranded. Look for a small slot or cover near the parking brake button on the dashboard. Insert a flathead screwdriver into that slot and turn it clockwise to engage the brake mechanically.
This manual override is a backup only — it requires the vehicle to be stationary and is not meant for regular use. Once your battery is recharged or replaced, the button system will work normally again. If you ever need to use the manual override, have the electrical system checked afterward to make sure there are no underlying issues.
Common issues and warning signs
If the parking brake button doesn't respond or the dashboard light stays on after you press it, the most common cause is a blown fuse or a loose electrical connection. Check your owner's manual for the fuse location — it's usually in the interior fuse box under the dashboard on the driver's side. A fuse replacement costs $5 to $15 and takes five minutes.
If the light stays on while driving, the system is telling you the brake didn't fully release. This can happen if the button is stuck or if there's a sensor malfunction. Do not ignore this warning — driving with the parking brake partially engaged will overheat the rear brakes and damage them. Pull over safely, try pressing the button again, and if the light doesn't go out, have the system scanned with a diagnostic tool.
Moisture or corrosion inside the button mechanism can also cause problems, especially if the vehicle sits in humid conditions for long periods. If the button feels sticky or unresponsive, spray electronic contact cleaner into the slot around the button (do not submerge it) and press it repeatedly to work the cleaner through.
Maintenance and what to expect long-term
The electronic parking brake on the 2019 Scat Pack requires almost no routine maintenance. Unlike mechanical brakes, there are no cables to adjust or lubricate. The system self-adjusts as the rear brake pads wear, so you don't have to worry about it becoming loose over time.
The rear brake pads will wear normally from both regular braking and parking brake use. If you use the parking brake frequently on steep hills, expect slightly faster pad wear than if you relied on the transmission to hold the vehicle in Park. This is a minor difference and not a reason to avoid using the parking brake — it's designed for this purpose.
If the system fails completely, replacement typically costs $400 to $800 at a Dodge dealership, including parts and labor. Independent shops may charge less. Most failures are electrical (fuses, wiring, or the button itself) rather than mechanical, so diagnosis is usually quick and inexpensive.
Comparing the electronic brake to older Charger models
If you're upgrading from an older Charger with a foot-pedal or hand-lever parking brake, the electronic system will feel different at first. The main advantage is convenience — no fumbling with a lever or reaching for a foot pedal. The main disadvantage is that you're dependent on the electrical system, whereas a mechanical brake works as long as the cables aren't broken.
The electronic brake is also more integrated with the vehicle's safety systems. It works with traction control and stability control to prevent wheel slip on slippery surfaces. A mechanical brake has no such integration, so it can actually cause problems if engaged on ice or snow — the electronic system is smarter about this.
Resale value is not affected by the parking brake type. Buyers expect electronic brakes on 2019 models, and they're considered a standard feature, not a luxury or a liability.
Frequently Asked Questions
Can I use the parking brake on a hill without the transmission in Park?
Yes, the electronic brake is strong enough to hold the vehicle on a moderate hill without Park engaged. However, for maximum safety, always shift into Park as well. The parking brake is a backup, not a replacement for Park. On very steep hills, use both Park and the parking brake for extra security.
Does the parking brake work if the engine is off?
Yes. The electronic brake draws power from the battery, not the engine. As long as the battery has charge, you can engage and release the brake with the engine off. If the battery is completely dead, use the manual override with a screwdriver.
What's the difference between pressing the button once versus holding it down?
Pressing once engages the brake fully. Holding the button down does nothing different — the system doesn't have a "partial engagement" mode. One press is all you need; holding it longer won't make the brake grip harder.
Will the parking brake drain the battery if I leave it engaged for weeks?
No. Once engaged, the electronic brake holds the vehicle using mechanical force (the brake calipers), not electrical power. It draws almost no current while holding. You can leave the brake engaged for months without draining the battery.
Can I tow the Scat Pack with the parking brake engaged?
No. Always release the parking brake before towing. If the brake is engaged, the rear wheels cannot roll, and towing will damage the brake system. If you need to tow a disabled vehicle with the brake stuck, use the manual override to release it first.