What an electric trailer jack does
An electric trailer jack is a motorized lifting device mounted on the tongue of a gooseneck or bumper-pull trailer. Instead of manually cranking a handle to raise and lower the trailer, you press a button or switch to operate it. The motor drives a gear mechanism that extends or retracts a shaft, lifting the front of the trailer off the ground so you can hitch or unhitch it from your towing vehicle.
Gooseneck trailers—those with a hitch that sits in the bed of a pickup truck—benefit most from electric jacks because the tongue sits higher than a bumper-pull trailer's, making manual operation harder on your back and arms. A typical electric jack can lift 2,000 to 5,000 pounds, which is enough to raise the tongue clear of the truck bed or ground.
Key Takeaways
- Electric trailer jacks use a motor and gear system to raise and lower the trailer tongue, eliminating the need to hand-crank a mechanical jack.
- Most electric jacks are powered by a 12-volt battery system and include a wireless remote or hardwired switch for operation.
- Installation requires mounting the jack to the trailer tongue, running power from the trailer's battery or a dedicated power source, and testing the mechanism before towing.
- Electric jacks cost between $300 and $800 depending on lifting capacity and brand, plus installation labor if you do not install it yourself.
- Regular maintenance includes checking battery connections, lubricating the shaft, and testing the motor before each towing season.
Power source and control options
Most electric trailer jacks draw power from a 12-volt battery system. On a gooseneck trailer, this is usually a dedicated battery mounted on the trailer frame itself, separate from your truck's battery. Some jacks can also tap into your truck's battery through the trailer's electrical connector, though this drains your truck battery if the trailer is parked for long periods without being towed.
Control comes in two main forms: a wireless remote control or a hardwired switch. Wireless remotes let you stand clear of the trailer while raising or lowering it, which is safer and more convenient. Hardwired switches mount on the trailer tongue or near the hitch point and require you to be within arm's reach. Some systems offer both options—a primary remote with a backup switch for emergencies.
Battery capacity matters. A small 12-volt auxiliary battery (around 35 amp-hours) can operate most jacks for 10 to 15 full cycles before needing a charge. If you hitch and unhitch frequently, a larger battery or a solar trickle charger helps keep the system ready.
Installation on a gooseneck trailer
Installation begins with choosing a mounting location on the trailer tongue. The jack must be positioned so it lifts the tongue evenly and does not interfere with the hitch mechanism or safety chains. Most gooseneck jacks mount directly to the underside of the tongue using a bracket and bolts.
Next, you run power cables from the trailer battery to the jack motor. These cables should be routed through a conduit or loom to protect them from road debris and weather. A fused disconnect switch between the battery and the jack prevents electrical fires and allows you to shut off power when the trailer is not in use. The entire wiring run should use marine-grade or automotive-grade wire rated for the amperage the motor draws—typically 30 to 50 amps.
If using a wireless remote, the receiver module mounts near the motor and connects to the power and control lines. Hardwired switches straightforward splice into the control circuit. After installation, test the jack fully extended and fully retracted to confirm smooth operation and that the trailer tongue reaches the correct height for hitching.
Lifting capacity and trailer weight
Electric jacks come in different lifting capacities, usually ranging from 2,000 to 5,000 pounds. The capacity you need depends on your trailer's tongue weight—the downward force the tongue exerts on the hitch point when the trailer is loaded.
To find your tongue weight, check your trailer's specifications or weigh the trailer on a truck scale with the tongue hanging over the edge. Most gooseneck trailers have a tongue weight between 1,500 and 3,500 pounds when loaded. Choose a jack with a capacity at least 20 percent higher than your actual tongue weight to may support the motor is not working at maximum strain every time you hitch.
Overloading a jack—using one with a capacity below your tongue weight—causes the motor to overheat, shortens its lifespan, and risks the jack failing when you need it. Undersizing is a common mistake that leads to expensive repairs or replacement.
Cost and installation labor
Electric trailer jacks range from $300 to $800 depending on lifting capacity, brand, and whether they include a wireless remote. A basic 2,000-pound jack with a hardwired switch costs less than a 5,000-pound jack with a wireless remote and integrated battery charger.
If you install the jack yourself, you need basic tools: a drill, socket set, wire crimpers, and a multimeter to test electrical connections. The job typically takes 2 to 4 hours if you are comfortable working with 12-volt systems and running wiring. If you hire a trailer shop or mechanic, labor usually runs $150 to $400 depending on the complexity of your trailer's existing electrical system.
Budget for any additional parts: a dedicated battery if your trailer does not have one ($100 to $200), a solar charger ($50 to $150), and extra wire and connectors ($30 to $50). Total out-of-pocket cost for a complete installation ranges from $400 to $1,200.
Maintenance and troubleshooting
Electric jacks require minimal maintenance but benefit from seasonal checks. Before each towing season, test the jack through a full cycle—raise and lower it several times to confirm smooth operation and listen for unusual grinding or clicking sounds. Check that the motor runs quietly and the shaft extends and retracts fully without hesitation.
Inspect the battery terminals for corrosion and clean them with a wire brush if needed. A corroded connection reduces power delivery and can cause the motor to run slowly or fail to operate. If your jack has a dedicated battery, charge it fully before storing the trailer for the winter.
Lubricate the shaft and any exposed gears with a light machine oil or silicone spray every season. This prevents rust and keeps the mechanism moving smoothly. If the jack moves slowly or does not lift the full tongue weight, the battery may be low or the motor may need professional service. Most electric jacks have a 2 to 5-year warranty, so check your documentation if problems arise within that window.
Alternatives to electric jacks
A manual crank jack is the traditional option and costs $100 to $300. It requires no battery or wiring, works in any weather, and never fails electrically. The trade-off is physical effort—raising a 3,000-pound tongue by hand takes 30 to 60 seconds and can strain your back or shoulders, especially on repeated hitches.
A hydraulic jack uses fluid pressure instead of an electric motor and is common on commercial trailers. Hydraulic systems are powerful and reliable but more expensive ($600 to $1,200) and require periodic fluid checks and seal maintenance. They are overkill for most private gooseneck trailers.
Some newer trailers come with integrated leveling systems that combine the jack with automatic load-leveling suspension. These are built-in at the factory and cost significantly more but offer convenience and stability. For existing trailers, retrofitting a leveling system is expensive and usually not worth it unless you tow frequently or carry heavy loads.
Frequently Asked Questions
Can I use my truck battery to power the trailer jack?
Yes, if your trailer has a proper electrical connector that carries 12-volt power from the truck. However, this drains your truck battery when the trailer is parked, especially if the jack is left in the raised position. A dedicated trailer battery is safer and more reliable.
What happens if the electric jack fails while I am towing?
A failed jack does not affect your ability to tow—it only prevents you from raising or lowering the tongue at your destination. You can manually crank the trailer down using a backup mechanical jack or call for roadside information. Always carry a manual jack as a backup.
Do I need a wireless remote or is a hardwired switch enough?
A hardwired switch works fine and costs less, but a wireless remote is safer because you can stand clear of the trailer while operating it. If someone or something is under the tongue, you will see it before raising. Wireless is worth the extra $100 to $150.
How often should I charge the trailer battery?
Charge it fully before each towing season and after every use if the trailer sits unused for more than a month. A solar trickle charger ($50 to $150) keeps the battery topped off automatically and is worth installing if you store the trailer outdoors.
Can I install an electric jack on an older gooseneck trailer?
Yes. Older trailers usually have a manual jack that you can remove and replace with an electric one. The mounting points are similar, and the wiring is straightforward if your trailer has a battery. If it does not, you will need to add one, which adds time and cost to the installation.