Engine mount replacement typically costs between $300 and $1,500 per mount, depending on which mount needs replacement, your vehicle's make and model, and whether you use a dealership or independent shop.

An engine mount is a rubber-and-metal component that holds your engine in place and absorbs vibration. Most vehicles have three to four mounts. When one fails, you'll notice excessive engine movement, vibration through the steering wheel or floor, or clunking sounds when you accelerate or brake. Replacing just the failed mount costs less than replacing all of them at once, but labor time varies dramatically depending on which mount is damaged and how accessible it is in your engine bay.

The price you'll pay depends on four main factors: the specific mount location, your vehicle's year and model, whether you go to a dealership or independent mechanic, and whether the shop uses original equipment manufacturer (OEM) parts or aftermarket alternatives. A front engine mount on a common sedan might cost $400 to $600 total, while a rear mount on a luxury vehicle or truck could run $800 to $1,500 or more.

Key Takeaways

  • Engine mount costs range from $300 to $1,500 per mount, with labor typically making up 50 to 70 percent of the total bill.
  • The specific mount location matters most — some mounts take 30 minutes to replace, others require removing the engine or transmission.
  • Dealerships charge 20 to 40 percent more than independent shops for the same work, but may use OEM parts as standard.
  • Aftermarket mounts cost less upfront but may not last as long as OEM parts, especially on high-mileage vehicles.
  • Waiting to replace a failed mount can damage other components like transmission mounts or engine oil seals.

How labor time affects your total bill

Labor is where engine mount replacement costs diverge most. A straightforward front mount replacement might take a mechanic 0.5 to 1 hour, while a rear or side mount can take 2 to 4 hours because the engine or transmission may need to be partially lifted or removed. Independent shops typically charge $80 to $150 per hour for labor, while dealerships charge $120 to $200 per hour.

Some vehicles make certain mounts harder to reach than others. A Honda Civic's front mount is relatively accessible; a BMW or Audi's rear mount may require removing the subframe. Before you get a quote, ask the shop how long they estimate the job will take and whether they need to lift the engine or remove other components. That answer tells you whether you're looking at a $200 labor bill or a $600 one.

OEM parts versus aftermarket mounts

Original equipment manufacturer mounts are made by the vehicle's manufacturer or a Tier 1 supplier and match the exact specifications your engine was designed for. They typically cost $100 to $400 per mount depending on the vehicle. Aftermarket mounts from brands like Prothane, Energy Suspension, or generic suppliers cost $40 to $150 per mount but vary in durability.

OEM mounts are worth the extra cost if your vehicle has high mileage or if you plan to keep the car for several more years. Aftermarket mounts may harden or fail sooner, especially if your engine produces significant vibration. Some shops offer a middle ground: remanufactured OEM mounts, which are used mounts rebuilt to factory specifications and cost 30 to 50 percent less than new OEM parts. Ask your mechanic whether remanufactured mounts are available for your vehicle.

Dealership versus independent shop pricing

Dealerships typically charge 20 to 40 percent more than independent shops for engine mount replacement. A job that costs $500 at an independent shop might cost $650 to $700 at a dealership. However, dealerships usually install OEM parts as standard, use factory service bulletins specific to your vehicle, and offer a warranty on parts and labor.

Independent shops often charge less and may offer more flexibility on parts choices, but quality varies. A well-reviewed independent shop with experience on your vehicle brand may deliver the same result at lower cost. Before choosing based on price alone, check reviews on Google or Yelp, ask whether the shop offers a warranty on the work, and confirm they have experience with your specific vehicle model.

What happens if you delay replacement

A failed engine mount doesn't cause when ready danger, but it creates problems if you ignore it. Excessive engine movement can damage the radiator hoses, transmission cooler lines, or the serpentine belt. It can also accelerate wear on other mounts, meaning you may end up replacing two or three mounts instead of one. Some drivers report that a failed mount eventually damages the transmission mount or engine oil seals.

The longer you drive with a failed mount, the more likely you are to need additional repairs. If you notice clunking or excessive vibration, have a mechanic inspect the mounts within a week or two. The cost of one mount replacement now is much less than replacing multiple mounts or repairing secondary damage later.

How to get an accurate quote

Call or visit three shops — at least one dealership and two independent mechanics — and provide your vehicle's year, make, model, and current mileage. Tell them which symptoms you're experiencing (clunking, vibration, visible engine movement) so they can narrow down which mount is likely failed. Ask for a written estimate that includes the part cost, labor hours, and whether they're using OEM or aftermarket parts.

A good estimate will also tell you whether the shop needs to lift the engine or remove other components. If one shop quotes significantly less than the others, ask why — it may mean they're using a cheaper aftermarket part, or it may mean they've underestimated the labor time. Don't choose based on the lowest price alone; choose based on the shop's experience with your vehicle and whether they stand behind their work with a warranty.

Signs you need engine mount replacement

The most common sign is a clunking or banging sound when you accelerate hard, brake suddenly, or shift between Drive and Reverse. You may also feel excessive vibration through the steering wheel, floor, or seat, especially at idle. Some drivers notice the engine visibly rocking side to side when they look under the hood with the engine running and the car in gear.

Not all vibration means a failed mount — worn spark plugs, a misfire, or an unbalanced wheel can also cause vibration. A mechanic can confirm a failed mount by visually inspecting it (a failed mount will show cracks, separation, or oil leaking from the rubber) or by feeling engine movement while the car is running. If you're unsure, get a diagnosis before you commit to replacement.

Frequently Asked Questions

Can I drive with a broken engine mount?

Yes, but you shouldn't for long. A failed mount won't cause when ready breakdown, but it increases vibration and can damage other components like hoses, belts, or transmission mounts. Have it replaced within a week or two to avoid secondary damage.

Do I need to replace all engine mounts at once?

No. Replace only the failed mount unless the others show visible cracks or separation. However, if your vehicle has high mileage (over 100,000 miles) and multiple mounts look worn, replacing them together may be more cost-effective than returning for repairs later.

How long do engine mounts last?

OEM mounts typically last 80,000 to 150,000 miles, depending on driving conditions and engine vibration. Aftermarket mounts may fail sooner. Mounts wear faster if you frequently tow, drive on rough roads, or have a modified engine.

Is it worth replacing a mount on an older car?

If the car is otherwise reliable and you plan to keep it, yes. A $500 mount replacement is usually cheaper than the depreciation hit from selling a car with a known mechanical issue. If the car is near the end of its life, weigh the repair cost against the car's current value.

Will a failed engine mount affect my transmission?

Indirectly. Excessive engine movement can stress the transmission mount and transmission cooler lines. If you ignore a failed engine mount for months, you may eventually need transmission mount replacement or transmission fluid line repair as well.