Start with your car's fuel economy and local gas prices

The simplest way to estimate mileage cost is to divide the distance you plan to drive by your car's fuel economy, then multiply by the current price of gas in your area. If your car gets 25 miles per gallon, gas costs $3.50 per gallon, and you drive 10,000 miles in a year, that's 400 gallons × $3.50 = $1,400 in fuel alone.

Your car's fuel economy appears in your owner's manual and on the EPA label if you still have the window sticker. You can also find it on fueleconomy.gov by entering your vehicle's year, make, and model. Real-world mileage often runs 10 to 15 percent lower than the EPA estimate, especially if you drive in stop-and-go city traffic or tow a trailer.

Gas prices vary by region and change weekly. Check GasBuddy or your state's energy office website for your local average. Using your actual regional price is more accurate than a national average.

Key Takeaways

  • Fuel cost is calculated by dividing annual miles by your car's fuel economy, then multiplying by local gas price per gallon.
  • Real-world fuel economy typically runs 10 to 15 percent lower than EPA estimates, especially in city driving.
  • Maintenance and repair costs add roughly $0.04 to $0.10 per mile depending on your car's age and condition.
  • Depreciation is the largest hidden cost for most drivers and depends on your car's make, model, and how many miles you put on it.
  • Total cost per mile usually ranges from $0.15 to $0.40, but varies widely based on fuel prices, vehicle type, and maintenance history.

Add maintenance and repair costs to the fuel number

Fuel is only part of what mileage costs you. Every mile you drive wears down your engine, transmission, brakes, tires, and suspension. The American Automobile Association (AAA) estimates maintenance and repair costs at roughly $0.04 to $0.10 per mile for a typical sedan, depending on the car's age and condition.

Newer cars under warranty cost less to maintain. Older cars with higher mileage cost more. A 2-year-old Honda Civic might run $0.04 per mile in maintenance; a 10-year-old vehicle might run $0.08 to $0.10. These figures include routine oil changes, filter replacements, brake service, and unexpected repairs — but not major engine or transmission failure, which would spike costs temporarily.

To estimate your own car's maintenance cost, look at what you actually spent on repairs and scheduled service over the past year, then divide by the miles you drove. If you spent $800 on maintenance and drove 12,000 miles, that's roughly $0.07 per mile.

Account for tire wear and replacement

Tires are a separate line item because they wear predictably and cost a known amount to replace. Most tires last between 25,000 and 50,000 miles depending on the brand, your driving habits, and road conditions. A set of four replacement tires for a typical sedan costs $400 to $800.

To find your tire cost per mile, divide the replacement cost by the tire's expected lifespan. If a set costs $600 and lasts 40,000 miles, that's $0.015 per mile. Add this to your maintenance estimate above.

Check your tire's tread depth now with a penny test: insert a penny into the tread with Lincoln's head upside down. If you can see the top of his head, your tires are worn and replacement is coming soon. This helps you predict when you'll need to budget for new tires.

Depreciation is the largest cost most drivers overlook

Every mile you drive reduces your car's resale value. This depreciation cost is often larger than fuel and maintenance combined, but it's invisible because you don't write a check for it. The loss in value happens whether you notice it or not.

Depreciation depends on your car's make, model, age, and condition. A Toyota Camry holds value better than a Chrysler 200. A car with 80,000 miles is worth less than an identical car with 40,000 miles. Industry data shows that each additional mile typically reduces a car's value by $0.05 to $0.15, though this varies widely.

To estimate depreciation for your specific car, check the current market value on Kelley Blue Book or NADA Guides using your car's exact year, make, model, mileage, and condition. Then check what the same car would be worth with 10,000 additional miles. The difference divided by 10,000 is your depreciation cost per mile.

Calculate your total cost per mile

Add fuel, maintenance, tires, and depreciation together to get your true cost per mile. For a typical sedan, this usually falls between $0.15 and $0.40 per mile, though luxury cars and trucks can run higher.

Here's an example: a 5-year-old Honda Civic with 60,000 miles might cost $0.08 in fuel, $0.05 in maintenance, $0.015 in tires, and $0.08 in depreciation — totaling roughly $0.215 per mile. A 10-year-old truck might run $0.12 in fuel, $0.08 in maintenance, $0.02 in tires, and $0.06 in depreciation — totaling $0.26 per mile.

The math changes if gas prices spike, if your car needs major repairs, or if you drive a vehicle with poor fuel economy. Recalculate annually or when circumstances change significantly.

Use mileage cost to compare driving versus alternatives

Once you know your cost per mile, you can decide whether to drive or use another option. If your mileage cost is $0.25 per mile and you're considering a 50-mile round trip, that trip costs you $12.50 in vehicle wear and fuel — not counting your time. A $15 rideshare might be cheaper when you factor in parking and the hassle of driving.

For longer trips, driving is usually cheaper than flying or taking a train. For short urban trips, public transit or rideshare often wins. For commuting, the math depends on your car's efficiency and how many miles you drive annually.

Mileage cost also matters when you're deciding whether to take a job offer in another city, whether to visit family across the state, or whether to make a weekly drive to a second home. Multiply your cost per mile by the annual miles you'd add, and you have a real number to weigh against the benefit.

Frequently Asked Questions

Does the IRS mileage rate match what my car actually costs?

No. The IRS standard mileage rate (currently $0.67 per mile for business driving) is a tax deduction, not a measure of actual cost. It's set by the government for tax purposes and changes annually. Your actual cost per mile is usually lower, especially for fuel-efficient cars or newer vehicles with low maintenance needs.

How do I know if my car's fuel economy is accurate?

Track it yourself: fill your tank, note the mileage, drive normally, then fill up again and divide miles driven by gallons added. Do this over several fill-ups to get an average. This real-world number is more useful than the EPA estimate because it reflects your actual driving conditions.

Should I include insurance and registration in mileage cost?

Insurance and registration are fixed costs that don't change based on how many miles you drive (though some insurers offer mileage-based discounts). For comparing the cost of one trip to another, leave them out. For calculating your total annual car cost, include them.

What if I lease instead of own?

Leases include maintenance and often have mileage limits (typically 10,000 to 15,000 miles per year). Going over costs $0.15 to $0.30 per excess mile. Calculate whether your expected annual mileage fits the lease allowance before signing.

Does electric vehicle charging cost less than gas?

Usually yes. Electricity costs roughly one-third to one-half what gasoline does per mile, depending on your local electricity rates and the EV's efficiency. However, battery degradation and replacement is a future cost that varies by model and warranty coverage.