Start with the frame and look for damage that affects safety
Before you ride an ATV or hand over money for one, inspect the frame for cracks, bends, or welding repairs. The frame is the skeleton of the machine — damage here means the ATV may not handle as designed, and a cracked frame can fail suddenly under load. Look at the welds where the frame tubes meet. Fresh welds (shiny metal, different color) suggest recent repairs. Older welds blend into the surrounding metal.
Run your hand along the frame tubes to feel for dents or creases. Small cosmetic dents do not matter. A crease that runs across a tube, or a tube that is visibly bent out of round, means the frame has taken a hard hit. Ask the seller what happened and whether a shop inspected it. If the frame has been welded and you are not certain of the repair quality, have a mechanic look at it before you buy.
Key Takeaways
- Inspect the frame for cracks and bends by looking at welds and running your hand along the tubes, since frame damage affects how the ATV handles and can fail suddenly.
- Check the engine by looking at oil color and level, listening for knocking or grinding sounds, and confirming it starts and idles without stalling.
- Test the brakes by squeezing the levers and pedal to confirm they feel firm and do not sink, then ride the ATV and confirm it stops smoothly.
- Examine the tires for tread depth, cracks, and bulges, and check that the suspension compresses and rebounds without sticking or making noise.
- Look at the undercarriage for bent axles, leaking fluids, and damage to the skid plate, which protects the engine and transmission from rocks and roots.
Check the engine oil and listen for sounds that signal internal wear
Pull the dipstick or look at the sight glass to check the oil level. The oil should be between the minimum and maximum marks. If it is low, ask the seller when they last added oil and how often they change it. Dark, thick oil or oil with a burnt smell means the engine has been running hot or the oil has not been changed recently. Fresh oil is amber or light brown.
Start the engine and listen for knocking, grinding, or rattling sounds. A light ticking is normal (valve train noise). A deep knock that gets louder as the engine warms up usually means bearing wear or internal damage. A grinding sound suggests metal-on-metal contact inside the engine. Let the engine idle for a minute. It should settle into a steady rhythm without stalling or surging. If the engine dies when you release the throttle, the carburetor may need cleaning or the fuel system may have a problem.
Test the brakes on the ground and then on a short ride
Squeeze the front brake lever and the rear brake pedal. Both should feel firm and resist your pressure. If either one sinks slowly toward the handlebar or footpeg without stopping, there is air in the brake line or the brake fluid is low. Do not ride the ATV until this is fixed. Soft brakes can fail when you need them most.
If the brakes feel firm, take the ATV for a short ride on flat ground away from traffic. Brake gently at first to feel how the machine responds. The front and rear should slow the ATV evenly without pulling to one side. Brake harder to confirm the ATV stops smoothly without skidding or locking up. If the brakes feel spongy or the ATV pulls hard to one side, the brake system needs work before you ride it regularly.
Examine the tires for tread, cracks, and signs of uneven wear
Look at the tread depth on all four tires. ATV tires should have at least 2/32 inch of tread remaining for safe riding. Use a penny: insert it into the tread with Lincoln's head upside down. If you can see the top of his head, the tread is too shallow. Check the tread in at least three spots on each tire, because uneven wear means the suspension or alignment is off.
Inspect the sidewalls for cracks, bulges, or cuts. Cracks in the rubber mean the tire is aging and may fail. A bulge in the sidewall is a weak spot that can blow out. Small cuts from rocks are normal, but a cut deeper than 1/4 inch or longer than 1 inch should be patched or the tire replaced. Spin each wheel and watch for wobbling or rubbing, which signals a bent rim or axle.
Check the suspension for smooth movement and unusual noises
Push down on each corner of the ATV with your body weight and release. The suspension should compress smoothly and bounce back without sticking or making noise. If it compresses but does not return, the shock absorber is worn out. If it makes a creaking or squeaking sound, the bushings may be dry or damaged.
Look underneath at the shock absorbers and suspension arms. Check for oil leaking from the shocks — a small amount of oil on the outside is normal, but a steady drip means the seals are failing. Inspect the suspension arms (A-arms) for bends or cracks. A bent arm will cause the ATV to pull to one side and wear tires unevenly. Grab the wheel at the top and bottom and try to move it side to side. There should be almost no play. If the wheel moves more than a quarter inch, the wheel bearings or suspension bushings are worn.
Look at the undercarriage for bent axles, fluid leaks, and skid plate damage
Get the ATV on a lift or jack it up safely so you can see underneath. Inspect the front and rear axles for bends or cracks. A bent axle will cause vibration and uneven tire wear. Check the transmission and engine for oil or fluid leaks. A small drip is normal, but a steady leak means seals are failing and the machine needs repair.
Look at the skid plate — the metal shield that protects the engine and transmission from rocks and roots. If it is bent or dented, the ATV has hit something hard. Straighten it if you can, or replace it if it is cracked. Check the undercarriage for bent or broken plastic fenders and guards. These do not affect safety but are expensive to replace.
Verify the steering, throttle, and controls respond smoothly
Turn the handlebars left and right through their full range. The steering should move smoothly without binding or catching. If the handlebars feel stiff or make a grinding sound, the steering column bearings may be worn. Twist the throttle and release it. It should snap back to idle when ready. If it sticks or returns slowly, the cable may be kinked or the carburetor may need cleaning.
Check that the clutch lever (if the ATV has a manual clutch) moves smoothly and engages and disengages cleanly. Squeeze the brake levers and press the brake pedal to confirm they move freely and return to rest. Look at the cables running from the handlebars to the engine. They should not be kinked, frayed, or rubbing against sharp edges.
Frequently Asked Questions
What should I do if I find a cracked frame?
Do not ride the ATV. A cracked frame can fail suddenly and cause you to lose control. If you are buying the machine, negotiate a lower price and have a shop repair it, or walk away. If you own the ATV, take it to a shop that specializes in frame welding and have them inspect and repair the crack before you ride again.
How often should I change the ATV oil?
Most manufacturers recommend changing oil every 50 to 100 hours of riding, or once a year if you ride less. Check your owner's manual for the exact interval. Dirty oil breaks down and stops protecting the engine, so staying on schedule keeps the engine healthy and catches problems early.
Can I ride an ATV with soft brakes if I am careful?
No. Soft brakes can fail completely without warning, especially if you brake hard or ride downhill. Fix the brake system before you ride. Have a shop bleed the brake lines to remove air, or replace the brake fluid if it is old or contaminated.
What does it mean if the ATV pulls to one side when I brake?
Pulling to one side usually means one brake is stronger than the other, or the suspension is bent. Have a mechanic inspect the brakes and suspension. Riding with this problem wears tires unevenly and makes the ATV harder to control in an emergency.
How do I know if the suspension is worn out?
Worn suspension feels bouncy or does not return to rest after you compress it, or it makes creaking sounds. The ATV will also sit lower than normal and may bottom out on bumps. Have a shop inspect the shocks and bushings. Worn suspension affects handling and can damage the frame over time.