What Fill Rite pumps are and where you'll find them
Fill Rite pumps are portable fuel transfer pumps used to move gasoline, diesel, or kerosene from one container to another. You'll see them in garages, on job sites, in farm equipment storage, and in vehicle maintenance shops. They're hand-crank or electric models that sit on top of a drum or barrel and push fuel through a hose into a vehicle tank or portable container.
If you own one of these pumps or work with one regularly, you'll eventually need to replace a worn hose, a damaged nozzle, a leaking seal, or an internal valve. The parts wear out from repeated use, exposure to fuel chemicals, and temperature changes. Knowing which part failed and where to find the replacement saves you downtime and money.
Key Takeaways
- Fill Rite pumps use standardized parts that are sold separately, so you can repair rather than replace the entire unit.
- The most common replacements are hoses, nozzles, seals, and internal valves — all available from industrial supply stores and online retailers.
- You need the pump model number (stamped on the housing) to order the correct part, since different models use different internal components.
- Fuel transfer hoses degrade over time and should be inspected annually, especially if the pump sits unused for months.
- Many Fill Rite parts cost between $15 and $75, making repairs far cheaper than buying a new pump.
Common Fill Rite pump parts that wear out
The discharge hose is the first part to fail on most Fill Rite pumps. It cracks, hardens, or develops pinhole leaks where fuel seeps out. Hoses come in different lengths (typically 12 to 25 feet) and different diameters depending on your pump model. When you order a replacement, you'll need to specify the pump model and the hose length you want.
The nozzle or spout gets damaged when it's dropped, bent, or left in the sun too long. A cracked nozzle won't seal properly and fuel will dribble out. Replacement nozzles are inexpensive and screw or snap onto the hose end. The inlet strainer (a small filter inside the pump intake) clogs with sediment or rust particles from old fuel drums. When it clogs, the pump loses suction and won't draw fuel. Cleaning it sometimes works; replacing it is faster.
Internal seals and gaskets dry out and crack, causing the pump to leak at the base or where the motor connects to the pump body. Valves inside the pump can stick or fail, preventing fuel from flowing in one direction. Both require opening the pump housing, so they're more involved repairs than hose or nozzle replacement.
How to identify your pump model and find the right parts
The model number is stamped or printed on the pump housing, usually near the motor or on the side of the body. Common Fill Rite models include the FR700, FR701, FR702, FR4204, and FR4210. Write down this number before you search for parts — it determines which hose diameter, nozzle type, and internal components will fit.
Once you have the model number, you can search for parts through these sources: the Fill Rite website parts catalog, industrial supply retailers like Grainger or Fastenal, fuel equipment distributors, and online marketplaces like Amazon or eBay. Many retailers let you filter by model number, which narrows the results to compatible parts only. If you're unsure which part you need, you can also call a distributor with your model number and describe the problem — they can tell you what to order.
Keep the pump manual if you have it. It includes a parts diagram showing each component and its part number. If you've lost the manual, many manufacturers post them online as PDFs. Search "[model number] manual" plus "Fill Rite" to find it.
Replacing hoses, nozzles, and inlet strainers yourself
These three parts are the easiest to replace without special tools. For the discharge hose, turn off and unplug the pump, then unscrew the hose from the pump outlet and from the nozzle. Slide the old hose off and slide the new one on, tightening the connections by hand first, then with a wrench if needed. Don't overtighten — you can crack the plastic fittings.
The nozzle usually screws onto the hose end or snaps into a collar. Unscrew or unsnap the old one and thread or snap the new one on. Make sure it seats fully so fuel won't leak around the connection. The inlet strainer is located where the hose enters the pump. Some models let you unscrew a cap to access it; others require removing the pump intake assembly. Check your manual or search for a video of your specific model to see which applies to yours. Once you access it, rinse the strainer under clean fuel or replace it with a new one.
After any hose or nozzle replacement, run a small amount of fuel through the pump into a container to check for leaks before you use it on a vehicle.
When to replace seals, gaskets, and internal valves
If fuel is leaking from the pump body itself — not from a hose connection — the problem is likely a failed seal or gasket. These repairs require opening the pump housing, which means draining any remaining fuel, unbolting the motor from the pump body, and carefully removing internal components. This is more complex than hose replacement and carries a higher risk of damaging other parts if you're not familiar with the pump's internal layout.
Many people choose to have a professional technician or a fuel equipment service center handle seal and valve replacements. The labor cost is usually $50 to $150, depending on the shop. If the pump is old or has failed multiple times, replacing the entire unit may be more economical than repeated repairs. A new Fill Rite pump typically costs $200 to $600 depending on the model and motor type.
If you decide to do the repair yourself, order a complete seal kit for your model (usually $20 to $40) and watch a detailed video of someone disassembling and reassembling your exact pump model. Take photos as you go so you remember how everything fits back together.
Where to buy Fill Rite pump parts
Industrial supply stores like Grainger, Fastenal, and MSC Industrial Supply stock Fill Rite parts and can ship them quickly. They usually require you to enter your model number to see compatible items. Online fuel equipment retailers specialize in pumps and hoses and often have lower prices and faster shipping than general industrial suppliers. A search for "Fill Rite parts [your model number]" will show you several options.
Amazon and eBay carry Fill Rite hoses, nozzles, and strainers, though you'll need to verify the listing matches your pump model before ordering. Local equipment rental shops sometimes sell parts or can order them for you. Farm supply stores like Tractor Supply or Agri Supply carry Fill Rite products and parts because farmers use these pumps regularly.
Prices vary by retailer and part type. A replacement hose typically costs $20 to $50, a nozzle $10 to $25, a strainer $15 to $35, and a seal kit $20 to $45. Shipping can add $5 to $15 unless you may have access to for free shipping. Buying from a local store means you avoid shipping costs and can get the part the same day if they have it in stock.
Maintenance to extend the life of your pump and parts
Store your Fill Rite pump indoors or under a cover when you're not using it. Sun exposure hardens hoses and degrades seals. If the pump will sit unused for more than a month, run clean fuel through it to flush out any sediment, then store it with the hose drained. This prevents fuel from sitting in the hose and gumming up the internal valves.
Inspect the hose and nozzle every few months if you use the pump regularly. Look for cracks, hardening, or discoloration. A hose that's starting to fail will feel stiff or show visible damage before it leaks fuel. Replacing it early prevents spills and downtime. Keep the inlet strainer clean by checking it every six months if you're drawing from old drums or containers that may have rust or sediment inside.
Use the correct fuel type for your pump. Fill Rite pumps are rated for gasoline, diesel, kerosene, or oil — check your manual to confirm which fuels your model handles. Using the wrong fuel can damage seals and internal components. If you're switching between fuel types, run a small amount of the new fuel through first to flush out residue from the old fuel.
Frequently Asked Questions
Can I use a Fill Rite hose from a different model on my pump?
Not reliably. Different Fill Rite models use different hose diameters and connection types. Using the wrong hose can cause leaks or poor fuel flow. Always match the hose to your pump model number. If you can't find the exact hose, contact a distributor with your model number and they can confirm what will fit.
What's the difference between a hand-crank and electric Fill Rite pump?
Hand-crank pumps require manual effort to move fuel and have no motor or electrical parts to fail. Electric pumps do the work automatically but depend on power and have a motor that can burn out. Parts like hoses and nozzles are the same for both types, but electric pumps have additional motor components that hand-crank models don't.
How long does a Fill Rite hose usually last?
A hose typically lasts three to five years with regular use, or longer if the pump is stored indoors and used occasionally. Exposure to sunlight, temperature swings, and certain fuel types speeds up degradation. Inspect your hose annually and replace it if you see cracks, hardening, or discoloration.
Can I repair a cracked hose by wrapping it with tape?
Tape is a temporary fix only and won't hold under pressure. Fuel will eventually seep through or around the tape, and you risk spilling fuel. Replace the hose instead. A new hose costs less than the fuel you'll lose and is safer.
Where do I find the model number if the pump is old and the label is worn?
The model number is usually stamped into the plastic or metal housing near the motor or on the side of the pump body. If the label is gone, look for raised or engraved text. If you still can't find it, take a photo of the pump and email it to a Fill Rite distributor — they can often identify the model from the design and color.