A forced reset trigger lets your Glock fire again if the trigger doesn't fully reset after you release it

A forced reset trigger (FRT) is an aftermarket firing control group that overrides your Glock's normal trigger reset mechanism. Instead of relying on your finger to move the trigger forward after each shot, an FRT uses a spring-loaded lever that physically pushes the trigger back into firing position. This means the gun can fire again even if you haven't fully released the trigger from the previous shot.

The practical effect is faster follow-up shots with less finger movement. In a standard Glock, you must release the trigger completely before it resets and fires again. With an FRT, you can keep your finger partially depressed and still get multiple shots by working the trigger in a different way — essentially converting the gun into something closer to a semi-automatic that fires on each micro-movement rather than each full trigger press and release cycle.

Key Takeaways

  • A forced reset trigger physically resets itself rather than waiting for your finger to release, allowing faster firing cycles with less trigger movement.
  • FRTs are legal to own and install in most states, but some states and jurisdictions have banned them or restricted their sale.
  • Installation requires removing your factory trigger group and replacing it with the aftermarket part — a task that takes 10 to 20 minutes with basic gunsmithing knowledge.
  • FRTs change how your Glock handles and feels significantly, and they may affect reliability or warranty coverage depending on your specific model and manufacturer.

How a forced reset trigger physically works

A standard Glock trigger resets when the firing pin spring pushes the firing pin forward after a shot. This forward motion of the firing pin pulls a connector that allows the trigger bar to move forward, resetting the trigger. You then have to release your finger to let the trigger move back to its resting position before you can fire again.

An FRT replaces this connector and adds a spring-loaded reset lever. When you fire, the reset lever is pushed back by the firing pin. As soon as you release pressure on the trigger — even slightly — the spring pushes the reset lever forward, which mechanically resets the trigger without waiting for your finger to move. This means you can keep your finger in the trigger guard, maintain partial pressure, and fire again by using a different finger motion or by letting the trigger reset itself and then pressing again.

The result is that the gun can cycle faster than a shooter's natural trigger-release-and-re-press rhythm. Some shooters can achieve rates of fire that approach or match fully automatic weapons, depending on their technique and the specific FRT design.

Legal status varies significantly by state and locality

FRTs are not illegal under federal law. The ATF has not classified them as machine guns, and they remain legal to manufacture, sell, and own in most of the United States. However, several states and cities have moved to restrict or ban them.

California, New York, and Washington have enacted laws that specifically prohibit forced reset triggers or devices that achieve similar effects. Some other states have proposed restrictions but have not yet passed them into law. Local ordinances in specific cities may also restrict them even if your state does not. Before purchasing or installing an FRT, check your state's current firearms laws and your local city or county ordinances, because the legal landscape changes and varies by location.

If you own a gun in a state where FRTs are legal, installing one does not automatically make your gun illegal — but transporting it across state lines into a state where they are banned could. This is a real legal risk that you need to understand before you buy.

Installation and compatibility with Glock models

Installing an FRT requires removing your factory trigger group and replacing it with the aftermarket part. The process typically takes 10 to 20 minutes if you have basic gunsmithing experience and the right tools — usually just a punch and a small screwdriver. Glock publishes armorer's manuals online that walk through trigger group removal, and most FRT manufacturers include installation instructions.

Not all FRTs work with all Glock generations. Most aftermarket FRTs are designed for Gen 3, Gen 4, or Gen 5 Glocks, and compatibility varies by manufacturer. A Glock 19 Gen 4 FRT will not fit a Glock 19 Gen 3 without modification. Check the product listing carefully to confirm your specific model is supported before you buy.

Installation is reversible — you can remove the FRT and reinstall your factory trigger group if you want to return the gun to stock configuration. However, installing any aftermarket firing control group may void your Glock warranty, depending on the manufacturer and your specific model. Contact Glock or check your warranty documentation before you install.

How an FRT changes the feel and handling of your Glock

An FRT changes how your trigger feels and responds compared to a factory Glock trigger. The reset is faster and more pronounced — you will feel and hear the trigger reset itself rather than waiting for your finger to move it. The trigger pull weight may also change slightly depending on the specific FRT design, though most are designed to match factory pull weight.

The bigger change is in technique. Shooting an FRT effectively requires a different finger motion than a standard Glock. You cannot straightforward press and release the trigger the way you would with a factory gun. Instead, you need to work the trigger in a way that lets the reset lever do its job — usually by using a rapid tapping or rocking motion with your finger, or by letting the gun reset and then pressing again. This takes practice, and shooters who are used to standard triggers often find the learning curve steep.

Reliability can also be affected. Some FRT designs have been reported to cause failures to fire or double fires in certain Glock models, depending on how the reset lever interacts with the firing pin and connector. This is not universal — many shooters report no reliability issues — but it is a real risk. Test your gun thoroughly at the range before you rely on it for any purpose.

Cost and where to buy forced reset triggers

FRTs typically cost between $80 and $200, depending on the brand and design. Common manufacturers include Polymer80, Rare Breed Triggers, and several smaller gunsmiths. Prices vary, and some designs are more expensive than others.

You can buy FRTs online from firearms retailers that ship to your state, or from local gun shops that carry aftermarket parts. Because legal status varies by state, some online retailers will not ship to certain states. Check the retailer's shipping policy and your state's laws before you order.

Installation labor at a gunsmith typically costs $50 to $150 if you do not want to do it yourself. This is optional — the installation is straightforward enough that most gun owners can do it at home with basic tools.

Reliability and safety considerations

An FRT changes how your gun fires, and that introduces variables that do not exist with a factory trigger. The most common issue is unintended double fires — the gun fires twice when you press the trigger once. This can happen if the reset lever is too aggressive or if the firing pin spring is worn. It can also happen if you use improper technique or if the FRT is not correctly installed.

Another concern is that the faster reset can make it easier to fire unintentionally if your finger is in the trigger guard when you do not mean to fire. This is a training and discipline issue, not a design flaw, but it is worth understanding before you install one.

Test your gun extensively at the range after installation. Fire at least 100 to 200 rounds and watch for any failures to fire, double fires, or other malfunctions. If you see problems, stop using the gun and either reinstall your factory trigger group or have a gunsmith inspect the installation.

Frequently Asked Questions

Is a forced reset trigger the same as a machine gun?

No. The ATF has ruled that FRTs are not machine guns because they do not fire more than one round per trigger press. However, some FRT designs can achieve rates of fire that approach automatic weapons if used with certain techniques. The legal distinction is about the mechanism, not the rate of fire.

Can I install an FRT myself, or do I need a gunsmith?

Most gun owners can install an FRT themselves with basic tools and the manufacturer's instructions. The process is similar to field-stripping your Glock and takes 10 to 20 minutes. If you are uncomfortable working on your gun, a gunsmith can do it for $50 to $150.

Will an FRT void my Glock warranty?

Possibly. Glock's warranty covers defects in materials and workmanship, but installing aftermarket parts may void coverage for issues related to the trigger group. Contact Glock directly or check your warranty documentation before you install to understand what you might lose.

What happens if I move to a state where FRTs are banned?

You would need to remove the FRT and reinstall your factory trigger group before you move or transport the gun across state lines. Possessing a banned FRT in a state that prohibits them can result in criminal charges. Check your destination state's laws before you move.

Can I use an FRT for self-defense or carry?

Legally, yes, in states where FRTs are permitted. However, using any modified firearm for self-defense introduces legal and practical complications. If you fire your gun in self-defense, prosecutors may argue that the modification shows intent to cause harm, and the faster rate of fire could complicate your legal defense. Most self-defense instructors recommend carrying a stock gun for this reason.