Full truckload services move your cargo in a truck dedicated entirely to your shipment
A full truckload (FTL) service means you rent or contract for an entire truck — usually a standard 53-foot semi-trailer — whether you fill it completely or not. The carrier does not combine your freight with other shippers' cargo. You pay for the truck's capacity, not by the pound or cubic foot. This is different from less-than-truckload (LTL) services, where your shipment shares space with others and you pay only for what you use.
FTL makes sense when you have enough cargo to justify the cost, when speed matters, or when your freight is fragile, hazardous, or requires special handling. If you are moving a vehicle or a small quantity of parts, FTL is almost certainly overkill. If you are a business shipping pallets of inventory across the country weekly, it may be your cheapest option per unit.
Key Takeaways
- Full truckload services cost between $2,000 and $5,000 for a cross-country move, depending on distance, fuel prices, and current carrier availability.
- FTL is cheaper per mile than LTL when you have 15 or more pallets, or when your shipment weighs more than 10,000 pounds.
- You can book FTL directly with a carrier, through a freight broker, or via load boards where shippers and carriers connect in real time.
- Pickup and delivery times for FTL are more flexible than LTL because the truck does not wait for other shipments to fill.
- Your freight is insured only up to the carrier's liability limit, usually $100 to $500 per pound; additional coverage requires a separate policy.
When FTL costs less than LTL shipping
The break-even point depends on weight, volume, and distance. A shipment of 8,000 pounds going 500 miles might cost $800 to $1,200 via LTL. The same shipment via FTL might cost $1,800 to $2,200 — more expensive. But if that shipment weighs 20,000 pounds or fills 18 pallets, LTL could run $2,500 to $3,500, while FTL stays around $2,000 to $2,500.
Carriers price FTL by the mile and the route. A truck from Los Angeles to New York costs more than one from Los Angeles to Phoenix, but the per-mile rate is often lower on high-demand lanes where carriers can find return loads. A truck from a rural area to another rural area costs more per mile because the carrier may struggle to find a load heading back.
LTL pricing includes a fuel surcharge, a handling fee, and fees for pickup and delivery at each terminal. Those fees add up fast on small shipments. FTL pricing is simpler: you pay a flat rate for the truck from point A to point B, plus any accessorial charges (inside delivery, liftgate, waiting time, etc.).
How to book a full truckload and what documents you need
You have three main routes: contact a carrier directly, work with a freight broker, or post your load on a load board. Direct carriers include large companies like J.B. Hunt, Werner, and Schneider, as well as smaller regional carriers. Brokers act as middlemen, taking your shipment details and finding a carrier willing to move it. Load boards like Convoy, Uber Freight, and DAT let you post a load and receive bids from carriers in real time.
Before you contact anyone, have these details ready: the weight and dimensions of your shipment, the pickup location and date, the delivery location and date, the type of freight (general cargo, hazmat, refrigerated, etc.), and any special handling needs. If you are shipping a vehicle, the carrier needs the vehicle identification number (VIN), the make and model, and whether it runs.
Once you book, you will receive a bill of lading (BOL), a legal document that lists the shipment contents, weight, pickup and delivery addresses, and the agreed rate. You sign this before the driver picks up. The driver also carries proof of insurance and a motor carrier authority number, which you can verify on the Federal Motor Carrier Safety Administration (FMCSA) website to confirm the carrier is legitimate.
What FTL typically costs across different distances
Pricing varies by fuel costs, carrier demand, and season. These ranges reflect typical 2024 rates but will shift with diesel prices and market conditions. A 500-mile shipment usually runs $1,500 to $2,500. A 1,000-mile shipment runs $2,000 to $3,500. A cross-country move (2,500 miles) runs $3,500 to $6,000. Shorter moves under 300 miles sometimes have a minimum charge of $800 to $1,200 because the carrier's costs do not scale down with distance.
Accessorial charges add to the base rate. Inside delivery (unloading at a dock inside a building rather than at the curb) adds $200 to $500. A liftgate on the truck adds $150 to $300. Waiting time beyond two hours at pickup or delivery runs $50 to $100 per hour. Hazmat freight (flammable, corrosive, or otherwise regulated materials) requires special placarding and driver certification, adding $300 to $1,000 to the base rate.
Fuel surcharges are built into most quoted rates now, but some carriers still add them separately if diesel prices spike. Always ask whether the quote includes fuel or if a surcharge will explore. Seasonal demand also matters: summer and the weeks before Christmas see higher rates because carriers are busier.
Insurance and liability limits you need to understand
A carrier's standard liability is capped at $100 to $500 per pound, set by federal law. If your shipment weighs 1,000 pounds and is worth $50,000, the carrier's liability is only $500 to $5,000 — far less than your actual loss if the shipment is damaged or lost. This is why high-value freight requires additional coverage.
You can purchase shipper's interest insurance (also called cargo insurance) through an insurance broker or directly from an insurance company. This covers the full value of your shipment and costs roughly 1 to 3 percent of the shipment value. A $10,000 shipment might cost $100 to $300 to insure. The policy covers loss, damage, and theft during transit.
Before you ship, declare the value of your freight to the carrier in writing on the bill of lading. If you do not declare it, the carrier's liability remains at the federal minimum. If the shipment is damaged and you file a claim, the carrier will ask for proof of value — an invoice, receipt, or appraisal. Keep these documents until the shipment is delivered and inspected.
Pickup and delivery timelines for full truckload moves
FTL pickup is usually faster than LTL because the truck does not wait for other shipments to consolidate. You can often book a pickup within 24 to 48 hours. Delivery time depends on distance and the carrier's route. A 500-mile shipment typically delivers within 2 to 3 days. A 1,000-mile shipment takes 3 to 5 days. A cross-country shipment takes 5 to 7 days.
These are estimates, not guarantees. Weather, traffic, mechanical issues, and driver availability can delay delivery. Most carriers offer a "may provide" delivery date for an extra fee, usually 10 to 20 percent of the base rate. If you need your freight by a specific date, paying for may provide service is worth the cost.
You can track your shipment in real time with most carriers. They provide a tracking number and a web portal or app where you see the truck's location, the driver's contact information, and an estimated delivery window. Some carriers offer text or email alerts when the truck is one hour away from delivery.
Freight brokers versus load boards versus direct carriers
A freight broker takes your shipment information, finds a carrier willing to move it, and handles all the paperwork. You pay the broker's quoted rate; the broker pays the carrier less and keeps the difference. Brokers are useful if you ship infrequently and do not have relationships with carriers. The downside is that you have no control over which carrier moves your freight, and if something goes wrong, you deal with the broker first, not the carrier.
A load board is a marketplace where you post your shipment and carriers bid on it. You see the carrier's name, safety rating, insurance status, and equipment type before you accept a bid. Load boards are faster and more transparent than brokers, but they require you to vet carriers yourself. Check the carrier's FMCSA safety record, insurance status, and customer reviews before booking.
Booking directly with a carrier gives you the most control and often the best rate because there is no middleman. Large carriers have dedicated account managers and can offer volume discounts if you ship regularly. Small regional carriers are often cheaper than national carriers on their home turf. The trade-off is that you have to build relationships and handle your own logistics.
Frequently Asked Questions
Can I book a full truckload for a single vehicle?
Yes, but it is expensive. A single car or truck usually costs $1,500 to $3,000 to move cross-country via FTL. If you are moving one vehicle, an auto transport service (which carries multiple vehicles on a specialized trailer) is cheaper — typically $800 to $1,500 for the same distance. Use FTL only if the vehicle is rare, high-value, or requires enclosed transport.
What happens if my shipment is damaged during transit?
Notify the carrier when ready and document the damage with photos. File a damage claim within the time limit stated in the bill of lading, usually 30 days. The carrier will investigate and either deny the claim or offer a settlement up to their liability limit. If you have cargo insurance, file a claim with your insurance company as well; they may recover the cost from the carrier.
Do I need to be present when the truck picks up or delivers?
For pickup, someone with authority to release the shipment should be present to sign the bill of lading and confirm the load. For delivery, someone should be present to inspect the freight and sign the delivery receipt. If you cannot be there, you can authorize someone else in writing, but having an eye on the shipment at both ends protects you if damage occurs.
What is the difference between a dedicated truck and a spot market truck?
A dedicated truck is reserved for your shipment on a specific date; you pay a premium for that certainty. A spot market truck is booked on a load board or through a broker and moves whenever the carrier has capacity; it is cheaper but less predictable. Use spot market for flexible timelines and dedicated service when you need a may provide pickup or delivery date.
Can I negotiate the price after I get a quote?
Yes, especially if you ship regularly or if you are flexible on pickup dates. Carriers have more margin on some lanes than others, and they may lower the rate if you can move your pickup window by a day or two. Brokers and load boards show you multiple carrier bids, so you can compare and negotiate with the lowest bidder before accepting.