A Hemi MDS delete kit removes or disables the Multi-Displacement System that your engine uses to save fuel
Chrysler's Multi-Displacement System (MDS) is a fuel-saving technology built into many Hemi V8 engines. When you're cruising at steady speeds on the highway, MDS shuts down four of your eight cylinders, letting the engine run on just four. The moment you need power—accelerating, towing, or climbing a hill—all eight cylinders fire back up. A Hemi MDS delete kit physically removes or electronically disables this system so your engine runs on all eight cylinders all the time.
The trade-off is straightforward: you lose the fuel economy benefit MDS was designed to provide, but you gain consistent power delivery and eliminate the complexity that comes with the system. Whether that trade-off makes sense depends on how you drive and what you value in your vehicle.
Key Takeaways
- MDS delete kits come in two types: mechanical kits that remove pulleys and brackets, and tuning kits that reprogram your engine computer to disable the system electronically.
- Removing MDS means your Hemi runs on all eight cylinders constantly, which increases fuel consumption but provides more consistent throttle response and power.
- A mechanical delete requires engine bay work and costs between $300 and $800 in parts; a tuning delete costs $400 to $600 and requires no physical installation.
- Disabling MDS does not damage your engine, but it may void your powertrain warranty depending on your vehicle's age and your dealer's policy.
- Owners who tow regularly, drive in stop-and-go traffic, or want predictable power response often find MDS deletion worthwhile despite the fuel economy penalty.
How MDS actually works inside your Hemi engine
Your Hemi V8 has eight cylinders arranged in two banks of four. When MDS is active, solenoids in the valve lifters cut oil pressure to four cylinders—usually cylinders 1, 4, 6, and 7—which causes their intake and exhaust valves to stay closed. Those four cylinders stop firing, and the engine idles on the remaining four. From the driver's seat, you feel almost no difference; the transition happens in milliseconds.
The system monitors your throttle position, engine load, and speed constantly. The moment you press the accelerator harder or the engine senses it needs more power, the solenoids restore oil pressure, the valves open, and all eight cylinders resume firing. This happens so quickly that most drivers never notice the switch. The benefit is real but modest: MDS can improve highway fuel economy by 5 to 10 percent under the right conditions, though real-world gains are often smaller.
The downside is that MDS adds complexity. The solenoids can fail, the valve lifters can wear unevenly, and some owners report a slight hesitation or roughness during the transition between four and eight cylinders. Over time, running on four cylinders also means those four work harder and accumulate more heat, which can accelerate wear if the system malfunctions.
Mechanical delete kits versus tuning-based deletes
A mechanical delete kit physically removes the components that make MDS work. The kit includes new pulleys, brackets, and gaskets that bypass or eliminate the solenoid-controlled valve lifters. You remove the MDS solenoids, replace the lifters with standard non-MDS lifters, and install new pulleys and brackets. The engine then runs on all eight cylinders because the hardware to disable them no longer exists.
A tuning delete leaves all the hardware in place but reprograms your engine control unit (ECU) to ignore the MDS system. The solenoids stay mounted, but they never receive the signal to cut oil pressure. From the engine's perspective, MDS is straightforward turned off. This approach is less invasive—no engine bay work required—but it leaves the unused hardware sitting there.
Mechanical deletes cost $300 to $800 in parts, plus labor if you have a shop do the work. Tuning deletes cost $400 to $600 and require no installation beyond connecting a laptop to your OBD-II port. Mechanical deletes are more permanent and remove the potential for the system to malfunction later; tuning deletes are reversible and faster but depend on your tuner's software quality.
What happens to fuel economy and engine performance
Expect your fuel economy to drop noticeably. On the highway, where MDS works most of the time, you may see a 5 to 10 percent decrease in miles per gallon. In city driving, the impact is smaller because MDS is less active anyway. If you drive mostly in stop-and-go traffic, the fuel economy penalty may be only 2 to 3 percent. Towing or hauling loads will consume more fuel regardless, so the delete's impact is less noticeable in those scenarios.
Power delivery becomes more linear and predictable. Without the transition between four and eight cylinders, throttle response feels smoother. Some owners report that their Hemi feels more responsive off the line and during mid-range acceleration. The engine also runs slightly cooler because all eight cylinders share the load more evenly, rather than four cylinders working harder during MDS operation.
Engine longevity is not harmed by a delete. Running on all eight cylinders is actually how the engine was designed to run; MDS is an add-on system. The only wear concern is if MDS was malfunctioning before the delete—in that case, the delete straightforward removes a broken system rather than fixing it.
Warranty and legal considerations
A tuning delete may void your powertrain warranty, depending on your vehicle's age and your dealer's interpretation of the warranty terms. Chrysler's warranty covers defects in materials and workmanship, not modifications. If your engine fails and the dealer can prove the tune caused it, they can deny the claim. If the failure is unrelated to the tune, they may still cover it. The outcome often depends on the individual dealer.
A mechanical delete is less likely to trigger warranty denial because you have not modified the engine computer. However, if the dealer discovers that you removed MDS components, they may still refuse warranty work on the valve train or lifters, since those parts were altered. Once your vehicle is out of warranty, neither type of delete affects coverage.
From a legal standpoint, a delete is not illegal in most states for street driving. However, some states have emissions testing requirements, and a tuned ECU may cause your vehicle to fail those tests if the tune changes emissions-related parameters. Check your state's emissions rules before proceeding. Off-road or track-only vehicles are not subject to emissions testing, so the legal risk is lower.
Who should and should not delete MDS
You are a good candidate for a delete if you tow regularly, drive in heavy stop-and-go traffic where MDS transitions are frequent, or straightforward want more consistent power response. Owners who value predictability over fuel economy often find the trade-off worthwhile. If you drive mostly highway miles and fuel economy matters to you, a delete is probably not the right choice.
Do not delete MDS if your vehicle is still under the powertrain warranty and you cannot afford to lose that coverage. Do not delete if you are uncertain about your state's emissions testing rules or if your vehicle is registered in a state with strict emissions compliance. Do not delete if you are uncomfortable with either the mechanical work or the tuning process—a poorly executed delete can cause drivability issues.
If your MDS system is malfunctioning—rough idle, hesitation during transitions, or a check engine light related to MDS solenoids—a delete is a practical solution. Rather than paying $500 to $1,000 to repair the system, you remove it entirely and gain the side benefit of smoother power delivery.
Installation process and what to expect
A tuning delete is the simplest route. You contact a tuner who specializes in your vehicle's year and model, provide them with your current ECU file (which they read through your OBD-II port), and they send you back a modified file with MDS disabled. You plug in, upload the tune, and you are done. The entire process takes 30 minutes to an hour. If you want to reverse it, the tuner can restore your original file.
A mechanical delete requires more time and skill. You will need to remove the valve covers, disconnect the MDS solenoids, replace the valve lifters with non-MDS units, and install new pulleys and brackets. The job typically takes 4 to 8 hours depending on your mechanical experience and your vehicle's engine bay layout. If you have a shop do it, labor costs will add $500 to $1,500 on top of parts. Many owners who are comfortable with engine work do this themselves to save on labor.
After either type of delete, your check engine light may come on briefly as the engine computer recognizes that the MDS system is not responding. A tuner can disable the related diagnostic codes so the light does not stay on. If you did a mechanical delete without a tune, you may need a custom tune to prevent the light from staying illuminated.
Frequently Asked Questions
Will deleting MDS hurt my engine?
No. Running on all eight cylinders is how your Hemi was designed to operate. MDS is an add-on system for fuel economy. Removing it returns your engine to its baseline state and does not cause damage or accelerated wear.
Can I reverse a delete if I change my mind?
A tuning delete is fully reversible—your tuner can restore your original ECU file anytime. A mechanical delete is permanent unless you reinstall all the MDS components, which is expensive and rarely done. Choose your approach based on whether you want the option to reverse it later.
Will I fail emissions testing after a delete?
It depends on your state and the type of delete. A mechanical delete does not change emissions output, so you should pass. A tuning delete may cause failure if the tune modifies emissions-related parameters. Check your state's emissions testing rules and ask your tuner whether their tune is emissions-compliant before proceeding.
How much will my fuel economy actually drop?
On the highway, expect 5 to 10 percent lower fuel economy. In city driving, the drop is usually 2 to 3 percent because MDS is less active in stop-and-go traffic. Your actual results depend on your driving habits and how aggressively you use the throttle.
What if my MDS system is already broken?
A delete is a practical solution. Repairing MDS solenoids or valve lifters costs $500 to $1,000. A delete removes the broken system entirely, eliminates the check engine light, and gives you the bonus of smoother power delivery. Many owners in this situation find it the best option.