Where to find the manufacture date on your helmet
The year your helmet was made is printed on a label inside the helmet, usually on the foam padding or the inner lining near the back or side. Look for a small white or tan sticker or tag sewn directly into the shell. The label will show the month and year of manufacture in a format like "03/2019" (March 2019) or sometimes just the year alone.
If the label has worn away or is hard to read, check the helmet's exterior for any embossed or printed information. Some manufacturers stamp the date code into the outer shell itself, though this is less common. The label is your most reliable source because it's the official manufacturing record.
Not all helmets have the same label placement. On full-face helmets, the label is often on the interior cheek pad or the back interior lining. On half helmets and open-face designs, it's typically on the inner crown area or the back padding. You may need to remove padding or shine a light inside to see it clearly.
Key Takeaways
- The manufacture date is printed on a label inside the helmet, usually on foam padding or the inner lining near the back or side.
- The date format is typically month and year, such as "03/2019" for March 2019.
- If the interior label is missing or illegible, contact the helmet manufacturer with the model number to confirm the age.
- Most safety standards recommend replacing a helmet every five to ten years, even if it has not been in a crash.
- A helmet that is more than ten years old should be replaced regardless of visible damage, because the foam degrades over time.
Why the manufacture date matters for safety
The foam inside a motorcycle helmet breaks down over time, even if you never crash. Ultraviolet light, temperature changes, humidity, and normal aging cause the foam to lose its ability to absorb impact energy. A helmet that is ten years old or older may look fine on the outside but provide significantly less protection in a crash than a new one.
Most helmet manufacturers and safety organizations recommend replacing your helmet every five to ten years from the date it was made, not from the date you bought it. This means a helmet sitting in a shop for two years before you purchased it is already two years into its lifespan. The foam does not reset when you put it on for the first time.
If your helmet has been in a crash, replace it when ready regardless of how new it is. The foam compresses during impact and loses its protective properties even if the outer shell looks undamaged. A helmet that has absorbed one major impact cannot absorb a second one as effectively.
Reading the label if it's faded or unclear
If the date on the label is faded, water-damaged, or partially illegible, try cleaning the area gently with a soft, dry cloth. Sometimes the ink is still there but covered by dust or residue. Hold the helmet up to bright light and look at the label from different angles—the date may become visible.
If you still cannot read it, look for the helmet's model number or brand name on the label. You can contact the manufacturer directly with this information and ask them to help you determine the manufacture date. Most manufacturers keep production records and can tell you when that specific model was made, especially if you can provide the color or any other identifying details.
Write down or photograph the model number and any visible information before you contact the manufacturer. This speeds up the process and gives them what they need to search their records.
What to do if the label is completely missing
A missing label makes it impossible to know the exact age of the helmet. In this situation, the safest approach is to assume the helmet is older than you know and consider replacing it. If you bought the helmet used or received it as a gift, you have no way to verify when it was actually made.
If you remember approximately when you bought the helmet, you can use that as a rough guide. Count forward five to ten years from your purchase date. If that window has passed, the helmet should be replaced. If you are uncertain and the helmet is more than five years old, replacement is the more cautious choice.
Some riders try to estimate age by the condition of the padding or the style of the helmet, but this is unreliable. A well-maintained helmet can look new at ten years old, and a neglected one can look worn at two years old. When the label is gone, you lose the only objective measure of age.
Checking the condition alongside the manufacture date
Even if your helmet is relatively new according to the label, inspect it for damage that would require replacement. Look for cracks in the outer shell, dents that do not pop back out, loose or peeling padding, and any signs of impact. If the chin strap is torn or the buckle is broken, the helmet cannot stay on your head in a crash.
Check the interior foam for compression or indentation. Press your thumb firmly into the foam in several spots. It should spring back quickly. If it stays compressed or feels thin and hard, the foam has degraded and the helmet should be replaced even if the manufacture date is recent.
Exposure to extreme heat, such as leaving the helmet in a hot car or in direct sunlight for extended periods, can speed up foam degradation. If your helmet has been stored in harsh conditions, it may need replacement sooner than the standard five- to ten-year window.
Keeping track of your helmet's age going forward
When you buy a new helmet, write the purchase date and manufacture date on a small label and place it somewhere you will see it—inside the helmet bag, on your bike, or in your maintenance log. This makes it straightforward to know at a glance when replacement time is approaching.
Set a reminder on your phone or calendar for five years after the manufacture date. When that date arrives, start thinking about replacement. By the time you reach ten years, replacement should be non-negotiable unless the helmet has been stored in ideal conditions and shows no signs of wear.
If you own multiple helmets, mark each one with its manufacture date so you do not accidentally grab an old one. Helmets that are used less frequently still age at the same rate as those you wear every day.
Frequently Asked Questions
Can I use a helmet that is more than ten years old if it has never been in a crash?
No. The foam inside degrades over time regardless of whether the helmet has been used or crashed. A ten-year-old helmet provides less impact protection than a new one, even if it looks perfect. Most manufacturers and safety organizations recommend replacement at the ten-year mark as a safety standard, not a suggestion.
Does the manufacture date or the purchase date matter more?
The manufacture date matters more because the foam begins aging as soon as it is made. A helmet manufactured in 2019 but purchased in 2021 is already two years old. The five- to ten-year replacement window starts from the manufacture date, not from when you bought it.
What if the label says the helmet was made more than ten years ago but it looks brand new?
Replace it. Appearance is not a reliable indicator of foam condition. A helmet stored in a cool, dry place can look new at twelve years old while the foam has already lost significant protective ability. The manufacture date is the only objective measure of age.
Is there any way to test if the foam is still good without replacing the helmet?
No. There is no field test that can measure foam degradation accurately. Pressing on it or looking at it tells you very little about its actual impact-absorbing ability. If the helmet is at or past the replacement window, replacement is the only way to may support protection.
Do I need to replace my helmet if it is five years old but still looks perfect?
Not when ready, but you should start planning for replacement. The five-year mark is when many manufacturers suggest considering replacement, and the ten-year mark is when replacement becomes essential. If your helmet is between five and ten years old, monitor its condition closely and replace it if you notice any degradation or if you are involved in any impact.