What a starter does and why it fails

Your Honda Accord's starter is an electric motor that cranks the engine when you turn the key or press the start button. It engages with the flywheel (manual transmission) or flexplate (automatic) to spin the engine fast enough to fire. On most Accords, the starter lasts between 80,000 and 150,000 miles, though some fail earlier and some go longer.

Starters fail because the internal brushes wear out, the solenoid (the electromagnet that engages the motor) stops working, or the bearings seize. Heat, moisture, and repeated use all contribute. You'll know yours is failing when you hear a clicking sound instead of cranking, a grinding noise as the starter engages, or nothing at all when you turn the key.

Key Takeaways

  • A new OEM Honda starter costs between $300 and $500 before labor, while aftermarket starters run $150 to $300.
  • Labor time is typically 1 to 2 hours at an independent shop or Honda dealer, adding $150 to $300 to your total bill.
  • The starter sits low on the engine block and requires removing the intake manifold on some Accord generations, which increases labor time and cost.
  • A clicking sound when you turn the key usually means the starter solenoid is failing, while a grinding noise suggests the starter gear is worn.

Starter cost by part type and where you buy it

An OEM (original equipment manufacturer) Honda starter for an Accord typically costs $300 to $500 depending on the model year and engine type. These are built to Honda's specifications and carry a warranty, usually 12 months or 12,000 miles. You can order them through a Honda dealer parts department or online retailers like RockAuto, FCP Euro, or Amazon.

Aftermarket starters from brands like Bosch, Denso, or DB Electrical cost $150 to $300 new. Many are remanufactured, meaning they've been rebuilt and tested but aren't brand new. Remanufactured starters often come with a core charge—typically $25 to $50—that you get back when you return your old starter. New aftermarket starters carry the same warranty as OEM parts, while remanufactured ones usually come with 12 months or 12,000 miles.

Buying the part yourself and bringing it to a shop usually saves you 20 to 30 percent compared to letting the shop source it, but confirm the shop will install customer-supplied parts before you order.

Labor costs and time at different repair shops

An independent mechanic or local shop typically charges $150 to $250 in labor for a starter replacement, with the job taking 1 to 2 hours. A Honda dealer charges $200 to $350 in labor for the same work. The difference reflects overhead: dealers have higher rent and certified technicians, while independent shops often have lower costs and can pass savings to you.

Some Accord model years require removing the intake manifold to access the starter, which adds 30 to 60 minutes of labor. This is common on 2003–2007 Accords with the K-series engine. Ask the shop whether your specific year and engine type requires this extra step before you commit to a price.

Total out-of-pocket cost ranges from $300 to $850 depending on whether you choose OEM or aftermarket, whether the shop has to remove the intake manifold, and whether you're at a dealer or independent shop.

How to tell if your starter is actually failing

A clicking sound when you turn the key is the most common sign. You hear rapid clicks but the engine doesn't crank. This usually means the solenoid is failing or the battery is too weak to power the starter. Check your battery first: if it's more than three years old or won't hold a charge, replace it before you replace the starter. A weak battery is cheaper to fix and is the most common cause of clicking.

A grinding noise when the engine starts means the starter gear isn't disengaging cleanly from the flywheel. You'll hear it for a second or two after the engine fires. This indicates the starter is wearing out and should be replaced soon, though it may still work for a while.

If you turn the key and hear nothing at all—no click, no crank, no sound—the problem could be the starter, the battery, the alternator, or the electrical connections. Have a shop test the battery voltage and the starter draw before you buy a new starter. Many shops do this for free or $50 to $100.

Choosing between OEM and aftermarket starters

OEM Honda starters are built to exact specifications and are may provide to fit and work. They cost more but carry Honda's reputation. If your Accord is newer (2015 or later) or you plan to keep it long-term, an OEM starter makes sense because the reliability is predictable and resale value matters.

Aftermarket starters from Bosch or Denso are reliable and cost less. Both brands supply parts to Honda and other manufacturers. The trade-off is that quality varies slightly between suppliers, and some remanufactured units have higher failure rates than new ones. If you're on a tight budget or your Accord is older, an aftermarket starter is a reasonable choice—just buy from a supplier with a good return policy in case it fails early.

Avoid the cheapest starters on Amazon or eBay unless they come with a no-questions-asked return window. A $100 starter that fails in six months costs more in time and frustration than a $250 starter that lasts five years.

What to expect during the replacement

The shop will disconnect the negative battery terminal first to prevent electrical shorts. They'll then remove the bolts holding the starter to the engine block—usually two or three bolts—and disconnect the electrical connectors. On some Accords, they may need to remove the intake manifold, exhaust heat shield, or other components to reach the starter.

The new starter goes in the same way it came out. The shop will reconnect the electrical connectors, bolt it down, and reconnect the battery. They'll then test the starter by cranking the engine a few times to confirm it works. The whole job typically takes 1 to 2 hours at an independent shop, or up to 3 hours if the intake manifold has to come off.

Ask the shop to show you the old starter when they're done. A visual inspection can confirm the solenoid failed (you'll see burn marks or corrosion) or the gear is worn. This gives you confidence the right part was replaced.

When to replace the starter versus repair it

Starters cannot be reliably repaired. The internal brushes, solenoid, and bearings are not user-serviceable, and rebuilding them requires specialized equipment. Some shops advertise starter repair, but they're usually just replacing the solenoid or cleaning corrosion—a temporary fix that fails again in weeks or months. Replacement is the only lasting solution.

The only exception is corrosion on the electrical connectors. If your starter clicks and a shop finds white or green corrosion on the battery terminals or starter connectors, cleaning them with a wire brush and dielectric grease may restore function. This costs $20 to $50 and is worth trying before you buy a new starter.

Frequently Asked Questions

Can I drive my Accord with a bad starter?

No. Once the starter fails completely, the engine won't crank and you're stranded. If you hear clicking or grinding, the starter is failing and you should have it replaced within a few days. Waiting risks being stuck somewhere inconvenient.

How long does a new starter last?

A quality OEM or aftermarket starter typically lasts 80,000 to 150,000 miles, or 10 to 15 years of normal driving. Some last longer; some fail earlier due to heat, moisture, or frequent short trips. There's no way to predict exactly when yours will fail.

Is it worth replacing the starter myself?

If you have mechanical experience and the right tools, you can replace a starter yourself on most Accords in 1 to 2 hours. The job is straightforward on newer models but requires removing the intake manifold on older ones. If you're not confident, labor costs ($150 to $300) are worth paying to avoid damaging other components.

What's the difference between a remanufactured and new aftermarket starter?

A remanufactured starter has been disassembled, cleaned, and rebuilt with new brushes and bearings. A new aftermarket starter is built from scratch. Remanufactured starters cost $50 to $100 less but have slightly higher failure rates. Both come with warranties, so either is a reasonable choice depending on your budget.

Should I replace anything else while the starter is out?

No, unless the shop finds a problem. The starter is independent of other engine systems. If the shop recommends replacing the alternator, battery, or other parts at the same time, ask them to explain why. Don't let them bundle unrelated repairs into one job.