What Del Sol owners actually modify, and why

The Honda Del Sol sits in a narrow space: it's light enough to feel responsive, but underpowered enough that owners when ready think about engine work. Most modifications fall into three categories: engine performance (intake, exhaust, tuning), suspension and handling (lowering springs, stiffer bars), and visual changes (body kits, wheels, interior trim). The appeal is straightforward — a stock Del Sol makes around 102 to 160 horsepower depending on the year and engine, which feels thin for a car marketed as fun to drive.

What you modify depends on how you use the car. Track-focused owners prioritize suspension and braking. Street drivers often start with exhaust and intake because they're visible, reversible, and relatively cheap. Visual modifications are popular because the Del Sol's targa top and compact body make it a good canvas, and because many owners treat it as a weekend car rather than a daily driver where reliability matters most.

Key Takeaways

  • Engine modifications on a stock Del Sol require tuning to run safely, because bolt-on parts alone can create lean conditions that damage the engine.
  • Suspension work (lowering springs, strut bars, stiffer bushings) changes how the car handles but can make it harsher on rough roads and affect tire wear.
  • Intake and exhaust modifications are reversible and popular starting points, but gains are modest — typically 5 to 15 horsepower — unless paired with engine tuning.
  • Targa top removal and interior modifications are cosmetic but require careful planning to avoid water leaks or electrical problems.
  • Parts availability varies by year and engine (D15Z1, D16Z6, B16A2), so confirm your specific engine before ordering.

Engine modifications and the tuning requirement

A bolt-on intake or exhaust alone does not safely add power to a Del Sol. The car's engine management system is calibrated for the stock airflow and fuel mixture. When you change the intake or exhaust, air enters faster but the fuel injectors do not automatically adjust, leaving the engine running lean. A lean condition burns hotter and can warp the cylinder head or damage the pistons in as little as a few hundred miles.

This is why experienced Del Sol owners pair any intake or exhaust work with a tune — either a reflashed ECU (engine control unit) or a piggyback tuner that sits between the stock computer and the sensors. A reflash rewrites the factory fuel and ignition maps to match the new airflow. Piggyback tuners intercept sensor signals and adjust them in real time. Both cost between $300 and $800 depending on the tuner and whether it's a mail-in service or a local shop. Without one, you are running the car in a state it was not designed for.

Realistic power gains from intake, exhaust, and tune together are 15 to 25 horsepower on a naturally aspirated Del Sol — noticeable but not transformative. Larger gains require internal engine work (higher compression pistons, ported heads, cams), which moves into the $2,000 to $5,000 range and introduces reliability risk if the work is not done by someone experienced with the B-series or D-series engines in your car.

Suspension changes and the trade-off with comfort

Lowering springs are the most common suspension modification because they drop the center of gravity, reduce body roll in corners, and change the car's stance. A set of lowering springs costs $200 to $400 and can be installed in a few hours. The catch is that lowering springs are stiffer than stock springs, which means the car transmits more road texture to the cabin. On a potholed street or a rough highway, a lowered Del Sol rides noticeably harder than a stock one.

Pairing lowering springs with adjustable dampers (shock absorbers) lets you dial in the stiffness, but quality dampers run $800 to $1,500 for a full set. Strut bars (front and rear) add lateral stiffness without changing ride height and cost $150 to $300. Stiffer sway bar bushings reduce body roll but can make the steering feel twitchy on bumpy roads. The pattern is consistent: handling improvements come with a comfort cost, and the benefit is most noticeable on smooth pavement or a track.

One practical consideration: lowering the car can cause rubbing if the wheels are too wide or the suspension compresses fully. Measure clearance before and after, and be aware that lowering also changes the angle of the headlights, which may require adjustment to avoid blinding oncoming drivers.

Intake and exhaust systems explained

An aftermarket intake replaces the stock air box with a tube that draws air from lower in the engine bay, where it is warmer and less dense. This sounds counterintuitive — you want cold air — but the real benefit is smoother airflow into the engine. A cold air intake that pulls from outside the engine bay is better but costs more and is harder to install. Expect $150 to $300 for an intake and a 3 to 5 horsepower gain on its own. The sound is louder, which some owners like and others find annoying after a few months.

An exhaust system replaces the stock muffler and catalytic converter with a less restrictive design. A cat-back exhaust (everything after the catalytic converter) costs $300 to $600 and is legal in most places. A full exhaust that includes a high-flow catalytic converter costs $500 to $900 and adds a few more horsepower because the cat-back alone is not the bottleneck — the stock cat is. Removing the catalytic converter entirely is illegal in all 50 states and will fail emissions testing, so do not do it.

The sound difference is real: a stock Del Sol is quiet, and an aftermarket exhaust makes it noticeably louder. Some owners love this. Others find that the noise gets old, especially on a long drive. You cannot easily undo this change without buying a stock exhaust, so listen to videos of the specific system you are considering before ordering.

Visual modifications and the targa top

The Del Sol's removable targa top is its signature feature, and some owners modify it by removing the roof panel entirely or replacing it with a fixed hardtop. Removing the panel makes the car lighter and changes the visual profile, but it also removes weather protection and can introduce water leaks around the seals if the work is not done carefully. A fixed hardtop adds weight back but looks cleaner and seals better than a modified targa.

Body kits (front bumper, side skirts, rear bumper) are available from several manufacturers and range from $400 to $1,500 depending on material and fitment. Fiberglass kits are cheaper but require painting and can crack. Polyurethane kits are more durable but cost more. Installation requires removing the stock bumpers and drilling or bonding the new pieces, which takes a full day at a shop or longer if you do it yourself.

Wheel upgrades are popular because they are reversible and when ready visible. A set of four lightweight wheels costs $600 to $1,500 and reduces unsprung weight, which improves handling and acceleration slightly. Wider wheels (17 or 18 inches instead of the stock 15) require a lower profile tire to avoid rubbing, and the stiffer sidewall of a low-profile tire makes the ride harsher. Interior modifications like seat covers, steering wheel swaps, and gauge clusters are cosmetic and do not affect performance.

Engine choice matters for parts availability

The Del Sol came with three engines across its production years: the D15Z1 (1992–1993, 102 hp), the D16Z6 (1993–1997, 125 hp), and the B16A2 (1998–2000, 160 hp). The B16A2 is the most powerful and the most popular for modification because it already has more power and responds better to tuning. However, parts designed for the B16A2 do not always fit the D-series engines, and vice versa. Before ordering an intake, exhaust, or tuning solution, confirm which engine is in your car by checking the engine block or the VIN.

The B16A2 has a larger community of tuners and more aftermarket support, which means more options and often lower prices. D-series engines have fewer dedicated parts, so modifications are sometimes more expensive or require adapters. If you own a D-series Del Sol and are planning significant modifications, research whether the specific parts you want are available for your engine before committing to a plan.

Reliability and reversibility

Most bolt-on modifications (intake, exhaust, wheels, springs) are reversible — you can remove them and return the car to stock condition. Engine tuning is also reversible if you keep the original ECU or tuner file, though some tuners do not allow you to revert. Internal engine modifications (ported heads, higher compression pistons) are not reversible and carry the risk of reduced reliability if the work is poor.

A modified Del Sol is a weekend car for most owners, not a daily driver. Modifications introduce new failure points: a lowered car can scrape on speed bumps, a tuned engine can detonate if you use the wrong fuel octane, and an aggressive exhaust can fail emissions testing if the catalytic converter is compromised. Before modifying, think about whether you are willing to troubleshoot these issues or whether you need the car to be reliable and predictable.

Frequently Asked Questions

Can I add horsepower without tuning the engine?

Intake and exhaust alone add 5 to 10 horsepower, but the engine runs lean without a tune and risks damage. A tune is necessary to safely use the full potential of bolt-on parts. Without tuning, you are leaving power on the table and risking engine damage.

Will lowering springs damage my car?

Lowering springs themselves do not damage the car, but they ride harder and can cause rubbing if the wheels are too wide or the suspension compresses fully. Check clearance before and after installation, and be aware that the car will be less forgiving on rough roads.

What is the cheapest way to modify a Del Sol?

Wheels and a new exhaust are the most visible changes for the least money — roughly $600 to $1,000 total. If you want performance gains, add an intake and a tune, which brings the cost to around $1,200 to $1,500 for modest but real improvements.

Do I need to tell my insurance company about modifications?

Yes. Modifications can affect coverage, especially if the car is damaged or totaled. Some insurers charge more for modified cars, and some will not cover damage related to the modifications if you do not disclose them. Call your agent before starting work.

Will modifications hurt my Del Sol's resale value?

It depends on the buyer. A well-done, reversible modification appeals to enthusiasts but may turn off buyers who want a stock car. Keep the original parts if you remove anything, and be honest about what has been done. A modified Del Sol typically sells for less than a stock one to a general buyer but more to someone looking for a project car.