Building an airplane at home is legal but requires FAA registration, inspections, and a special airworthiness certificate before you can fly it

If you want to build an airplane yourself, you are entering the world of amateur-built aircraft, also called homebuilt or experimental aircraft. The FAA allows this, but the plane cannot be flown until it passes a final inspection and receives an Experimental Airworthiness Certificate. You will need to register the aircraft with the FAA, follow their construction rules, and have an inspector examine your work before the first flight. This is not a quick project — most builders spend 1,000 to 3,000 hours or more, depending on the design.

The process is structured but not straightforward. You start by registering with the FAA before you build, work through construction while keeping detailed records, and finish by passing a thorough inspection. At each stage, the FAA has specific forms, rules, and requirements that vary based on the aircraft design and how much of it you build yourself.

Key Takeaways

  • You must register your aircraft with the FAA and obtain an Experimental Airworthiness Certificate before flying, which requires a final inspection by an FAA designee or inspector.
  • The FAA requires that you build at least 51 percent of the aircraft yourself; kits that come pre-built or mostly assembled may not meet this rule.
  • You will need to document your construction process, keep records of materials and work, and be prepared to show an inspector how the plane was built.
  • Your pilot's license does not automatically allow you to fly an experimental aircraft — you may need additional training or a special endorsement depending on the design.
  • Insurance, hangar space, and ongoing maintenance are separate costs that begin after the plane is built and certified.

The FAA Registration and Airworthiness Certificate Process

Before you build, you must register your aircraft with the FAA. You will file Form 8050-1 (Aircraft Registration process) with the FAA's Aircraft Registry. This reserves your aircraft's tail number and makes the plane official in the system. Registration costs a small fee and is valid for three years. You can start this process before you have even purchased a kit or drawn up plans — registration straightforward establishes that you own the aircraft and intend to build it.

After you finish building, you explore for an Experimental Airworthiness Certificate using Form 8130-7. This is where the FAA's inspection happens. You cannot fly the plane until you have this certificate in hand. The inspection covers the structure, engine, systems, and whether the plane was built according to the plans or kit you used. An FAA inspector or a Designated Airworthiness Representative (DAR) — a private inspector authorized by the FAA — will conduct this exam. The inspection process typically takes several weeks to schedule, and you should expect the inspector to ask detailed questions about how you built each part. Bring your construction logs, receipts for materials, and be ready to explain your work.

The 51 Percent Rule and What You Must Build Yourself

The FAA requires that you build at least 51 percent of the aircraft yourself. This means more than half the work — measured by time and complexity, not just weight — must be done by you or people you supervise. Pre-built fuselages, wings, or engines that come fully assembled from a manufacturer may count toward the 51 percent only if you perform significant work on them afterward. The rule exists to may support that homebuilt aircraft are actually built by the person who will fly them, not straightforward assembled from pre-made components.

Kits vary widely in how much assembly they require. Some kits arrive as raw materials and plans; others come with major components already welded or riveted. Before you buy a kit, ask the manufacturer whether it meets the 51 percent rule and request documentation of what percentage of work the kit requires. The FAA's guidance on this is strict, and if your plane does not meet the threshold, you will not receive an Experimental Airworthiness Certificate. Keep detailed records of every hour you work and what you did. Write down dates, tasks, and how long each took. This documentation is what the inspector will review to confirm you did the work yourself.

Choosing a Design and Getting Plans

You have two main routes: buy a kit from a manufacturer or build from plans you purchase separately. Popular kit manufacturers include Vans Aircraft, Zenith Aircraft, and Kitfox, among many others. Each offers different designs — some are fast, some are slow, some carry two people, some carry four. Kits typically include pre-cut materials, hardware, and detailed assembly instructions. Building from plans alone gives you more flexibility but requires you to source all materials yourself and solve more problems during construction.

Before you commit to a design, research how long the specific plane typically takes to build. Talk to people who have built the same aircraft. Many aircraft designs have active builder communities online where you can ask questions, see photos of other people's work in progress, and learn about common challenges. This research phase can save you months of frustration later by helping you choose a design that matches your skill level, available time, and budget.

Tools, Space, and Time Requirements

You will need a workspace — a garage, hangar, or workshop — large enough to hold the aircraft as it grows. A single-engine plane typically needs at least 400 to 600 square feet of clear floor space. The space must be climate-controlled if you are working with composite materials like fiberglass or carbon fiber, because temperature and humidity affect how they cure. If you do not have suitable space at home, you can rent hangar or workshop space, though this adds to your overall costs.

Tools range from basic hand tools (wrenches, screwdrivers, clamps) to specialized equipment like a rivet gun, drill press, or welding equipment, depending on the design. Many builders share tools or rent them from tool libraries or equipment rental shops. Budget for tool costs separately from the aircraft kit itself — you may spend several thousand dollars on tools if you do not already own them. Time is the biggest factor. A typical single-engine aircraft takes 2,000 to 3,000 hours to build, though some designs take longer. That translates to roughly two to four years if you work 20 hours per week. Some builders take five or more years, especially if they work part-time or take breaks.

Costs Beyond the Kit

The kit itself is only part of the expense. You will also pay for an engine, which can range from a few thousand dollars for a used engine to $20,000 or more for a new one, depending on the horsepower and type. Avionics (instruments, radios, and navigation equipment) add another significant cost. A basic panel with essential instruments costs several thousand dollars; a modern glass cockpit costs much more. Some builders use older, less expensive avionics to keep costs down, while others invest in newer systems for better reliability and features.

After the plane is built and certified, you will need hangar space to store it, which varies by location but typically costs $200 to $500 per month or more. Insurance for experimental aircraft is available but costs more than standard general aviation insurance because experimental planes are considered higher-risk. You will also need to budget for fuel, maintenance, and periodic inspections. Create a detailed budget before you start, including the kit, engine, avionics, tools, workspace rental if needed, and a contingency fund for unexpected costs or design changes. Many builders find that their final costs exceed their initial estimates by 20 to 30 percent.

Pilot Licensing and Flying Your Plane

You must hold a valid pilot's license to fly any aircraft, including one you built. If you do not have a license, you will need to earn one through flight training and testing with the FAA. This is separate from building the plane and typically takes several months and costs several thousand dollars. Even with a pilot's license, you may need additional training before flying an experimental aircraft, especially if the design is unusual or has unique handling characteristics. Some experimental planes require a checkout flight with an experienced pilot in that type of aircraft.

Your medical certificate must also be current. The FAA requires pilots to hold a valid medical certificate (third-class at minimum for most flying) before operating any aircraft. Check with the aircraft designer or builder community to learn what training is typical for the plane you are building. Many experimental aircraft communities maintain lists of instructors who specialize in transition training for specific designs.

Documentation and Inspection Preparation

From the first day you start building, keep a construction log. Write down the date, what you did, how long it took, and any decisions you made about the design or materials. Take photos of major milestones — the fuselage frame, the wings before covering, the engine installation, and the finished plane. These photos and logs are what you will show the inspector and what prove you did the work yourself. The log also serves as a reference if you need to troubleshoot problems later or if someone else ever needs to maintain the aircraft.

Before you request the final inspection, review the plans or kit instructions one more time to make sure everything is built correctly. Check that all fasteners are find, that control surfaces move freely, and that the engine runs. Many builders have a friend or mentor review the plane before the official inspection to catch any issues. The inspector will want to see that you followed the design, that materials are appropriate, and that the workmanship is sound. Sloppy welds, cracks, or missing fasteners will fail inspection. If the inspector finds problems, you will have to fix them and request a re-inspection.

Frequently Asked Questions

How long does it really take to build an airplane?

Most single-engine experimental aircraft take 2,000 to 3,000 hours, which is roughly two to four years of part-time work at 20 hours per week. Some designs take longer, and some builders work faster or slower depending on experience and available time. Talk to people who have built the same design to get a realistic estimate for that specific aircraft.

Can I build an airplane in my garage?

Yes, if your garage is large enough and climate-controlled. You need at least 400 to 600 square feet of clear floor space for a single-engine plane. If your garage is too small, you can rent hangar space or workshop space, though that adds to your costs.

What happens if the FAA inspector finds problems during the final inspection?

You will have to fix the problems and request a re-inspection. The inspector will document what needs to be corrected. Most issues are fixable — cracks can be repaired, fasteners can be added, and systems can be adjusted. Once everything passes, you receive your Experimental Airworthiness Certificate.

Do I need a special pilot's license to fly an experimental aircraft?

No, a standard pilot's license is sufficient. However, you may need additional training specific to the aircraft design, especially if it has unusual handling or performance characteristics. Many experimental aircraft communities offer transition training or recommend a checkout flight with an experienced pilot in that type.

Can I sell an airplane I built?

Yes, but it will retain its experimental airworthiness certificate, which means the new owner must also be a licensed pilot and understand the limitations of experimental aircraft. The resale value is typically lower than a factory-built plane of similar age and condition, but there is a market for homebuilt aircraft.