What you're looking for when you check a fuse
A fuse is a small cylinder, usually plastic with metal caps on each end, that sits in a box under your hood or dashboard. It protects one electrical circuit—your headlights, wipers, power windows, or radio—by breaking the circuit if too much current flows through. When a fuse blows, the metal wire inside melts, and whatever that fuse protected stops working.
To check a fuse, you need to look at two things: whether the metal filament inside is broken, and whether the plastic casing is discolored or cracked. A good fuse has an intact wire visible through the plastic. A blown fuse has a broken or missing wire, or the plastic is blackened.
You do not need tools or special knowledge to look at a fuse. You do need to know which fuse controls which circuit, and that information is printed on the inside of the fuse box cover or in your owner's manual.
Key Takeaways
- Your car has at least one fuse box, usually under the hood on the driver's side or under the dashboard, with a diagram on the cover showing which fuse controls which system.
- A blown fuse has a broken wire inside the plastic cylinder or blackened plastic, while a good fuse has a clear, intact wire visible through the casing.
- Pull a fuse straight out by gripping the plastic body, not the metal ends, and hold it up to light to see the wire clearly.
- If you replace a fuse and it blows again within days, the underlying electrical problem needs diagnosis by a mechanic, not repeated fuse replacement.
- Fuses come in different amperages marked on the top; always replace a blown fuse with one rated for the exact same amperage.
Locating your fuse box and the diagram
Most cars have two fuse boxes: one under the hood near the battery or firewall, and one inside the cabin under the dashboard on the driver's side. Some vehicles have both, and a few older or specialty vehicles may have additional boxes. Your owner's manual will tell you the exact location for your model.
The fuse box cover itself has a diagram printed on the inside or back. This diagram shows a grid of numbered positions and lists what each fuse controls—for example, "Fuse 12: Headlights, 15A" or "Fuse 8: Wipers, 20A." The amperage rating (the number followed by "A") is critical: it tells you the maximum current that fuse is designed to handle.
If your cover diagram is missing or illegible, your owner's manual contains the same information. You can also search online for "[your car year, make, model] fuse box diagram" and find the layout from manufacturer resources or repair sites.
How to remove and inspect a fuse
Open the fuse box cover by unclipping or unscrewing it. The fuses sit in slots in a plastic holder. To remove a fuse, grip the plastic body of the cylinder between your thumb and forefinger and pull straight out. Do not pull on the metal ends—they can bend or break off, making the fuse harder to remove and harder to see the wire inside.
Once the fuse is out, hold it up to a light source—a flashlight, a lamp, or sunlight through a window. Look through the clear plastic casing at the metal wire running across the inside. A working fuse has a continuous, unbroken wire. A blown fuse has a gap in the wire, a broken or missing section, or the plastic casing is darkened or charred.
If the fuse looks intact, the problem is not that fuse. Put it back in the same slot and check the next fuse in the circuit, or move on to diagnosing the actual cause of the electrical failure—which may be a loose connection, a bad switch, or a failing component.
Replacing a blown fuse
If you find a blown fuse, note the amperage rating printed on the top of the cylinder. This number (10A, 15A, 20A, 30A, and so on) must match exactly on the replacement fuse. Putting in a fuse with a higher amperage rating defeats the protection the fuse provides and can allow too much current to flow, damaging the circuit or the component it protects.
Buy replacement fuses at any auto parts store, drugstore, or big-box retailer. They cost between 50 cents and a few dollars each. Fuses come in assorted packs or individually. Insert the new fuse into the empty slot by pushing it straight in until it clicks or seats fully. The metal ends should be flush with the holder.
Turn on the system that was not working—your headlights, wipers, or radio—and confirm it works. If it does, the fuse was the problem. If the new fuse blows within a few days or when ready, the underlying electrical issue is not a fuse problem and requires a mechanic's diagnosis.
When a fuse keeps blowing
A fuse that blows once may have been protecting the circuit during a temporary surge or a one-time short. A fuse that blows repeatedly—within days of replacement, or multiple times in a month—signals a real electrical fault: a short circuit, a failing component, a corroded connection, or a wire rubbing through its insulation.
Do not keep replacing the fuse. Each time you do, you are bypassing the protection and risking damage to wiring, a component, or even a fire. Instead, stop using that circuit if possible and take the car to a mechanic. Bring the fuse box diagram and tell the mechanic which fuse keeps blowing and what system it controls. That information narrows the diagnosis significantly.
A mechanic will use a multimeter to check for shorts, inspect wiring and connections, and test the component the fuse protects. The repair might be as straightforward as cleaning a corroded connector or as involved as replacing a failed motor or switch.
Fuse types and why they matter
Most modern cars use blade fuses, the small rectangular cylinders described above. Some older vehicles use cartridge fuses, which are larger and cylindrical, or glass fuses with metal caps on each end. Your fuse box will contain only one type, and replacements must match that type exactly.
Within blade fuses, the amperage and physical size are linked. A 10A fuse is smaller than a 30A fuse, so you cannot accidentally put a 30A fuse in a 10A slot. However, you can buy the wrong amperage if you are not paying attention, so always read the number on the top of the fuse before you buy or install it.
Some fuses are color-coded by amperage—for example, brown for 10A, red for 15A, blue for 20A—but do not rely on color alone. Always check the printed number on the top of the fuse.
What to do if you cannot find the blown fuse
If a system is not working but you cannot find a blown fuse in the box, the problem may be elsewhere. Check that you are looking at the correct fuse box—some cars have more than one. Confirm you are reading the diagram correctly and looking at the right fuse for the system that failed.
If all the fuses in the relevant circuit look intact, the issue is not a blown fuse. The problem could be a loose connection, a failed relay (a switch that controls the fuse circuit), a bad ground, or a failing component. At that point, a mechanic's diagnostic tools are needed to trace the circuit and find the fault.
Do not assume a fuse is blown if you cannot see the break clearly. Inspect it under good light. If you are still unsure, remove it and compare it side by side with a new fuse of the same amperage—the difference will be obvious.
Frequently Asked Questions
Can I use a higher amperage fuse if I do not have the right one?
No. A higher amperage fuse will not blow when it should, which means the circuit loses its protection. This can damage wiring, overheat components, or cause a fire. Always use the exact amperage listed on the diagram. If you do not have the right fuse, buy one before driving the car.
What if the fuse box is hot or I smell burning?
Do not touch the fuse box. Turn off the engine, let it cool, and do not drive the car. A hot fuse box or burning smell means there is an active electrical fault—possibly a short or an overheating component. Have the car towed to a mechanic rather than attempting to diagnose it yourself.
Is it safe to check a fuse while the engine is running?
Yes, you can open the fuse box and inspect fuses with the engine running. However, do not remove a fuse while the engine is on—you could create a spark or interrupt a critical circuit. Turn off the engine before you pull any fuse out.
Can a fuse go bad without blowing?
Rarely. A fuse either works or it does not. If a system is failing intermittently but the fuse looks intact, the problem is usually a loose connection, a failing relay, or a bad component—not the fuse itself.
Where can I buy replacement fuses?
Auto parts stores, drugstores, hardware stores, and big-box retailers all stock fuses. You can also order them online. Bring the amperage rating and fuse type with you, or buy an assorted pack that includes common sizes.